yes and that too at wopping 30fps at 1440p or 4k. performance mode would provide 60 at 1440p or 1080. pretty sure gta6 it will set one of the biggest benchmark in gaming industry@@MachinimaCommentary1
I hope you realize you're supporting actual slavery by buying from TEMU. Look into the Uyghur people, Someordinarygamers, and the people from The China Show have both covered this fact pretty well.
Real talk though, even if it does help, I don’t think it’s worth anyone intentionally trying to buy faceplates with holes on the side. There have been so few overheating issues with the ps5, I don’t think there’s anything wrong with sticking to the oem setup. Especially these, because the build quality is terrible lol
@24lunaticasylum Shouldn't. But full disclosure, I don't own a ps5, and am only basing my assertion on the design of the fan as it is essentially the same mechanical layout as a blower fan on a graphics card which pulls air in from the bottom of the card and pushes it out the rear.
@@jrob0021yea but there pretty good quality the plastic is a nice quality and the fan cut outs have dust covers that are removable so easy to clean. My console runs cooler about 3 degrees cooler.
@@PepsiManX360 oh yeah I don't doubt that they're nice plates, I just don't think anyone should buy them for the sole purpose of reducing thermals by 3 degrees. But here's my thing - if the dbrand plates, which were probably designed with lower temps in mind, only lower the temp by 2-3 degrees, I can't imagine these cheapo plates from temu are improving thermals at all. If you compare the design side-by-side, it looks like the dbrand plates have more open ventilation than the temu plates. The vents on the temu plates also jut out a bit - not sure how that would affect airflow. And then you throw on RGB lights under those vents, which take up even more airflow space, and you're definitely not getting better thermals. So I'd wager that these temu plates plus rgb lights are probably making your ps5 3 degrees hotter. I say all of this, but I honestly don't think it's a big deal either way. I don't think +/-3 degrees is going to be the difference in your console overheating or not in the vast majority of cases. I think most people should just buy the plates they think look cool. My ps5 personally still just has the og plates
I guy already did a video on vented face plates if anything the vented face plates help by 1 degree they do not interrupt the airflow go watch the video. It's like an hour long
8:34 I like how we can see Jacob's set up of the two monitors off the reflection from the gold PS5. Also it reveals the monitor behind Jacob is just a green screen.
Nah them dust filters are good, my pc front has the same mesh and it catches dust and my pc isnt as dusty inside since using it. Definitely worth getting for ps5
That's reasonable paranoia though. I heard enough stories about faulty 360 ventilation fan accessories that bricked the console. I don't trust accessories that are intended on being powered from the console's USB ports because of that.
That faceplate, you have a tool that tests for over heating, why not test it to see if it over heats then everyone will know if that plate is OK to use or not
Be careful what information you give to Temu. They collect all kinds of personal and even private information about you, personal information, the keystrokes you enter, the IP address of the devices you are using, etc, etc. It won't cause any immediate damage to you..... But it is worth noting that Temu is more about collecting information about you than it is about selling cheap products. Whatever you do, please do not research the dark side of Temu..... You will most definitely regret it. But if you do, just know that you have been warned!
According to the PS engineers the ps5 cools on vacuum, så the intakes on the side could actually remove some cooling flow from the SSD you can put in yourself, so if you upgrade your storage you need to block the sidevents on that side of the SSD so the flow of air comes over the cooling sink or else you shorten the lifetime and could end up damaging internal components :)
Companies have been doing it for years. Creating 3rd party accessories with more holes and fans trying to solve something that’s largely a non issue. I think the holes are interesting in this case since you can see the lights through them
Not to get into the science of aerodynamics too much but the vent would not interrupt airflow, depending on angle of design it could actually improve it. However I still think it’s not a good idea to make a habit of buying faceplates with holes or vents because they could be pointless, and adding the RGB and junk is what really interrupts the heating/cooling of the system.
I have the DBrand 2.0 dark plates and my console runs perfectly fine I think it runs better because before I got those plates the fan was a little noisy and after with the new plates it’s more silent. Plus DBrand offers dust covers so it keeps the fan from getting all dusty lots of other plates I noticed don’t.
I put the leds on mine a long time ago love them you just need to take your time on the install. Also their skins are great if you TAKE YOUR TIME lol (not an affiliate lol) they have goven me lots of free stuff though.
Yeah I'm sure they are lol. Darkplates were the first to put side grills for fans I believe. A tad expensive but I've heard good things about them, they even have clear retro atomic colors.@@jrob0021
@@jrob0021I have the original dbrand darkplates before Sony sued them.they are actually surprisingly better than the official ps5 plates.they are a darker black better texture.they are a little thicker and way more sturdy then the Sony plates
08:00 why not put it in the USB port on the fan? 😂 And it should pull air out of the console not blow air in. The back vents is where the hot air is pushed out so why put something that blocks the flow?
Yeah I’ve seen some other people say that as well. Although tbh, I don’t think these can be compared to dbrand. The ventilation holes are completely different and the ventilation portion juts out a little bit compared to dbrand. Given that the dbrand plates only improve cooling by a small amount, would these changes give the same results? I have no idea, but I’d guess if they do help cooling, it’s probably not as much as dbrand. Dbrand was probably designed with extra cooling in mind, I can guarantee you these were not. Either way I don’t think it’s worth spending a bunch of money for a few degrees of extra cooling. Just buy the plates if u think they look cool
I plugged mine in and it feel apart in my hands no lie I love shopping with this place but the stuff is cheap made knock off shh that makes my head hurt sometimes anyways my lights still work ordered them months ago 😊
Looks like new metallic alloy paste revalutionary most expensive exclusive thenlike akobe transformative transformer most ever in front of the orca exhibite best opener opened
I have a faceplate set for my ps5 with vents and has dust fillers on it for over a year and my ps5 works just fine if anything it runs more quietly because it has direct access to fresh air so the fans don’t have to work as hard my model of ps5 is the first edition with the big heatsink so can’t speak for the other models but like I said mines running just fine
Temu is not worth it. billionaires dont shop there. That " dust cover " is obstructing air flow. Open a window and leave the screen down youll feel air but not as much as you would if the screen were open. It also looks like someone took some scissors to a screen mesh without measuring it.
The accessories are okay I guess. I wouldn't under any circumstances purchase the "cooling" fan. I'm a fan of the Black and White aesthetics of the PS5 so I wouldn't get that either. Hm, come to think of it, I probably wouldn't get any of this stuff in this video, except maybe the PS5 logo stickers.
I’ve seen articles that indicate it’s better and articles that indicate it makes no difference. I’m definitely in the camp of it probably doesn’t make enough of a difference either way like I said in the video. But it’s a moot point for these specific plates because the build quality crap. Waste of money
I can’t wait for the PS5 edition TEMU
PREINSTALLED TRACKER TO BE TRACKED WHEN YOU TURN IT ON
Will the ps6 run gta 6?
yes and that too at wopping 30fps at 1440p or 4k. performance mode would provide 60 at 1440p or 1080. pretty sure gta6 it will set one of the biggest benchmark in gaming industry@@MachinimaCommentary1
I hope you realize you're supporting actual slavery by buying from TEMU. Look into the Uyghur people, Someordinarygamers, and the people from The China Show have both covered this fact pretty well.
Just an opinion, the gold plates look cheap like the cheap chrome colored toys made from _________
You bought the temu ps5 face plates not temu ps5 console.false thumbnail.
Saved me the watch 👌
@@itzandylee4397but if you watch you become 20% more sigma
@@PurpleMonkVR4you're so cringey nobody says sigma it's unfunny
@@PurpleMonkVR4 my bad luh bro it just sounded like you were fr😔🙏
Fr. Bro
Ngl, the gold with multi colored lights looks fire on that PS5!
4 ads in 2 seconds you really suck TH-cam I miss the old TH-cam.
this is NOT the appstore/playstore lil bro.
There's ways to get around that
found this channel during the DK oldies videos, stayed because I enjoy all of his content. Keep putting out the content Jacob!
Me too😂
Me too
The fan is a blower style, so having that vent on the side should provide significantly better intake flow to the fan.
Not once you throw on 2 sets of rgb lights 😂😂
Real talk though, even if it does help, I don’t think it’s worth anyone intentionally trying to buy faceplates with holes on the side. There have been so few overheating issues with the ps5, I don’t think there’s anything wrong with sticking to the oem setup. Especially these, because the build quality is terrible lol
@jrob0021 so if I wanted the fan vent holes on the side just for the aesthetic would that be ok? Doesn't interfere with cooling?
@24lunaticasylum Shouldn't. But full disclosure, I don't own a ps5, and am only basing my assertion on the design of the fan as it is essentially the same mechanical layout as a blower fan on a graphics card which pulls air in from the bottom of the card and pushes it out the rear.
@@24lunaticasylum the lateral vents improve . See Gamer Nexus
That image of the swagged out PS5 is the best thing I've seen all day.
"If Goldmember owned a PS5."
Bc he like gold
Shhhhmoke and a pancake
Let play playshation 5 awshtin powers and Fahja LOL my console it's nothing you ever seen. It's made of GOOOOOOLD (GOLD)
What about lclc
@@donnellcoleman7784”fake gold” right?
This is the PS5 you would get if you won the Taco Bell contest
Ngl, the led lights with the gold face plate looks sick. This edition looks cool.
9:10 bro bought an 8th from the dispensary 😭😂
😂😂
Haven't seen your videos on my yt for a while now, glad to check this one out.
Those vents on the sides are helpful.
DBrand uses them for the Dark Plates 2.0 and other have ran tests and it lowers the temperature by around 2-3°F
$70 for 3 degrees? Come on now lol
you buy them to make it not white anymore. why theyre called DARK plates. you dont buy them for the holes. @@jrob0021
$70… Yes, but they’re a nicer set of plates than the Seto Kaiba OG plates. Just pointing out that it isn’t going to damage your system.
@@jrob0021yea but there pretty good quality the plastic is a nice quality and the fan cut outs have dust covers that are removable so easy to clean. My console runs cooler about 3 degrees cooler.
@@PepsiManX360 oh yeah I don't doubt that they're nice plates, I just don't think anyone should buy them for the sole purpose of reducing thermals by 3 degrees.
But here's my thing - if the dbrand plates, which were probably designed with lower temps in mind, only lower the temp by 2-3 degrees, I can't imagine these cheapo plates from temu are improving thermals at all. If you compare the design side-by-side, it looks like the dbrand plates have more open ventilation than the temu plates. The vents on the temu plates also jut out a bit - not sure how that would affect airflow. And then you throw on RGB lights under those vents, which take up even more airflow space, and you're definitely not getting better thermals. So I'd wager that these temu plates plus rgb lights are probably making your ps5 3 degrees hotter.
I say all of this, but I honestly don't think it's a big deal either way. I don't think +/-3 degrees is going to be the difference in your console overheating or not in the vast majority of cases. I think most people should just buy the plates they think look cool. My ps5 personally still just has the og plates
I guy already did a video on vented face plates if anything the vented face plates help by 1 degree they do not interrupt the airflow go watch the video. It's like an hour long
8:34 I like how we can see Jacob's set up of the two monitors off the reflection from the gold PS5. Also it reveals the monitor behind Jacob is just a green screen.
inception
So I'm confused. The video says you bought ps5. The pic shows a ps5 console. But it's accessories... Don't get it.... Nice video though
I really like that gold PS5 with the LED lights, pretty cool, tacky, but cool. BTW those fans tend to make more damage than any good.
Probably introduces dust
😂 temi orders look like 👍 when you got something from a crackhouse 😂 or from the dark web 😂 😂
I think those LEDs need to be screwed below the fan metal plates
What kind of Frankenstein monster have you done?! 😂
Nah them dust filters are good, my pc front has the same mesh and it catches dust and my pc isnt as dusty inside since using it. Definitely worth getting for ps5
Yeah it wasn’t as bad as I thought it’d be, but this thing was ugly lol
@@jrob0021 ha yeah definitely not the best looking ps5 ive seen 😅
your pc probably has more than 1 fan in the front tho to counteract the restriction of the dust filter. this ps5 literally only has 1 fan
@@C0mmanderXgood point
1:34 The Rich Man's PS5
I'm always paranoid about breaking my stuff and feel like if I got those LED lights, I'll destroy my PS5, lol.
That's reasonable paranoia though. I heard enough stories about faulty 360 ventilation fan accessories that bricked the console. I don't trust accessories that are intended on being powered from the console's USB ports because of that.
That faceplate, you have a tool that tests for over heating, why not test it to see if it over heats then everyone will know if that plate is OK to use or not
Be careful what information you give to Temu. They collect all kinds of personal and even private information about you, personal information, the keystrokes you enter, the IP address of the devices you are using, etc, etc. It won't cause any immediate damage to you..... But it is worth noting that Temu is more about collecting information about you than it is about selling cheap products. Whatever you do, please do not research the dark side of Temu..... You will most definitely regret it. But if you do, just know that you have been warned!
@@ChuckPikeyou can 🤡 whatever you want but since my friend used Temu, his number is everywhere. Could be a coincidence but it's pretty weird .
"the dark side of Temu" 🤡
completely incorrect and baseless
No different than any other marketplace. This is basically standard practice.
For the fan led you need to take the cover and then take off then take ps5 fan cover off then you stick the led in then screw it back
8:35 u can use notebook paper for air blow/suction test
Oh good idea
i think those gold plates will actuly improve airflow!!! its not like the psp you modded that u destryed the internal housing...
According to the PS engineers the ps5 cools on vacuum, så the intakes on the side could actually remove some cooling flow from the SSD you can put in yourself, so if you upgrade your storage you need to block the sidevents on that side of the SSD so the flow of air comes over the cooling sink or else you shorten the lifetime and could end up damaging internal components :)
The airvents on the aide makes it alot cooler my ps5 was cooking with the revular plates now it never gets hot i got gold plates to but sleeker design
It looks INSANE nice
I think it's hilarious that third-party is flooding the market with faceplates that have ventilation holes lol.
Companies have been doing it for years. Creating 3rd party accessories with more holes and fans trying to solve something that’s largely a non issue. I think the holes are interesting in this case since you can see the lights through them
Not to get into the science of aerodynamics too much but the vent would not interrupt airflow, depending on angle of design it could actually improve it. However I still think it’s not a good idea to make a habit of buying faceplates with holes or vents because they could be pointless, and adding the RGB and junk is what really interrupts the heating/cooling of the system.
I have the DBrand 2.0 dark plates and my console runs perfectly fine I think it runs better because before I got those plates the fan was a little noisy and after with the new plates it’s more silent. Plus DBrand offers dust covers so it keeps the fan from getting all dusty lots of other plates I noticed don’t.
Gold PS5 looks sick! Hate white faceplates on og.
I put the leds on mine a long time ago love them you just need to take your time on the install. Also their skins are great if you TAKE YOUR TIME lol (not an affiliate lol) they have goven me lots of free stuff though.
bro when i got my new ps4 controller for xmas (i lost my old one) the manual said wireless controller for P4
How fitting that I got an ad for Temu before watching this.
1:25) I see an Xbox 360 in the bottom left corner
2:16) Jacobr is a blob in the reflection
I like the stickers but only want the original PS1 logo colors. I hate that they come with other colors for $3
C-3PO edition
"Actually kinda cool" tuff ah bro fr I had a good time watching this 😂
Pimp my ps5
Maybe a PS5 slim or digital would fit better in the PS5 backpack and you can still carry a few games and your controller.
bro temu ad showed up when i click on this video
I get almost the same rgb effect when i leave my skylanders portal plugged in
This guy is goated bro buys weird stuff/ accessories and then tries it on his ps5
Crazy prices tho
Even TEMU is taking notes from the dbrand darkplates
I’ve never used the dbrand plates, but these are absolute junk lol
Yeah I'm sure they are lol. Darkplates were the first to put side grills for fans I believe. A tad expensive but I've heard good things about them, they even have clear retro atomic colors.@@jrob0021
@@jrob0021I have the original dbrand darkplates before Sony sued them.they are actually surprisingly better than the official ps5 plates.they are a darker black better texture.they are a little thicker and way more sturdy then the Sony plates
The faceplates reminded me of C-3PO and R2-D2 Xbox’s they came out with
3:20 more like handcuffs 💀
Next upload is more Hampton Haul where you test the consoles you just shown previously right? I wanted to see how those 360s are doing
The dualsense controller in the tumbnail wth
They could have at least added a side pocket on the outside of the backpack to put the controller lol..
PS5 looks like its on life support equipment.
The good faceplates are a huge win it’s like getting the xbox Star Wars edition console for dumb cheap
I have had no issues from temu yet , been using them from day one.
We can all take our PS5s to school now. Been waiting for the right backpack.
And there you have it, the PS5 solid gold, pimp edition coming to a hood near you!
Wrap a towel around the ps5 to protect it
08:00 why not put it in the USB port on the fan? 😂 And it should pull air out of the console not blow air in. The back vents is where the hot air is pushed out so why put something that blocks the flow?
"Dr. Evil, can I paint his (PS5) GOLD?"
The RGB lights is cool!
Why did I think that the “8K” on the thumbnail said “EPK”
I used to have the gold sticker thing for my PS4 slim.
Dbrand fPS5 plates have the vents on the side also with filters. It has shown to actually improve airflow.
Yeah I’ve seen some other people say that as well. Although tbh, I don’t think these can be compared to dbrand. The ventilation holes are completely different and the ventilation portion juts out a little bit compared to dbrand. Given that the dbrand plates only improve cooling by a small amount, would these changes give the same results? I have no idea, but I’d guess if they do help cooling, it’s probably not as much as dbrand. Dbrand was probably designed with extra cooling in mind, I can guarantee you these were not. Either way I don’t think it’s worth spending a bunch of money for a few degrees of extra cooling. Just buy the plates if u think they look cool
Go overboard more LED lights More more power Make it the brightest PlayStation 5 So bright you can see it from space
Well no wonder i didn't know those faceplates existed, I never use temu.
Dust cover makes it look trailer…like a PS5 with a crappy screen door 😂
Here’s the TL;DR for this video
“This thing is actually pretty cool, the only downside is, it sucks”
I plugged mine in and it feel apart in my hands no lie I love shopping with this place but the stuff is cheap made knock off shh that makes my head hurt sometimes anyways my lights still work ordered them months ago 😊
Love the video man ❤
Looks like new metallic alloy paste revalutionary most expensive exclusive thenlike akobe transformative transformer most ever in front of the orca exhibite best opener opened
With the gold it looks like it belongs to iron man 😂
I have a faceplate set for my ps5 with vents and has dust fillers on it for over a year and my ps5 works just fine if anything it runs more quietly because it has direct access to fresh air so the fans don’t have to work as hard my model of ps5 is the first edition with the big heatsink so can’t speak for the other models but like I said mines running just fine
I'm surprised that TEMU isn't receiving a MASSIVE, MASSIVE LAWSUIT by Sony?!
How to make a £600 console look like a quality street sweet. That gold makes it look sooooo tacky.
have you connect the PS 5 portable to the PS 4
I'm trying to work out the level of sarcasm in this
the ps5: im tired boss
He keeps assuring us he’s not gonna lie. Do we have reason to believe he will? Makes you wonder
It was a extra usb port on the fan thing
Intake and Outlet lol!
more rgbs for more fps 💪
Yessss
really good video love the gold and the rgb fans so cool
No. There are good tests that indicate that the lateral vents improve the temperature
No chick fillet sauce? 👀
I waited all that time to see gameplay… oh well
Temu is not worth it. billionaires dont shop there. That " dust cover " is obstructing air flow. Open a window and leave the screen down youll feel air but not as much as you would if the screen were open. It also looks like someone took some scissors to a screen mesh without measuring it.
more like rgb blinding lights coming out of the system
Played video got TEMU ad...
can you get the fortnite 2 bundle for it?
This has no business looking as good as it did.
Team Up Price Down LOL!!
The accessories are okay I guess. I wouldn't under any circumstances purchase the "cooling" fan. I'm a fan of the Black and White aesthetics of the PS5 so I wouldn't get that either. Hm, come to think of it, I probably wouldn't get any of this stuff in this video, except maybe the PS5 logo stickers.
Maybe the classic logo sticker with gray faceplates to mimic the classic playstation
PS5 Dubai Addition
Vents on the side improve thermals, plenty of articles about it.
I’ve seen articles that indicate it’s better and articles that indicate it makes no difference. I’m definitely in the camp of it probably doesn’t make enough of a difference either way like I said in the video. But it’s a moot point for these specific plates because the build quality crap. Waste of money
I can’t believe Temu is the better Wish
Now imagine a diamond ps5
And my lights had 3m tape on both circles
I just watched this whole video just for him to not even plug it up and show us what it looks like when you try to play it ...
Bro you went for the maximum ad revenue.. !