Another use case is in piping. Using a plan sketch and an elevation sketch to get a full path. There is issue if either the plan or elevation sketches have straight lines that end up converging in the same perpendicular plane. You'll end up with a forked path, similar to the two chip example. The forked path has a complete path and a portion, the full path can be swapped with the order sketch selection. An example is if one sketch is a L, and the other sketch is P. Or L and H
Hello, what could be the reason then some model dimensions could not been shown in drawing? I have a dim from plane to plane, an extrusion depth, and others than can't be called to been shown in drawing in any view
There could be a number of reasons. The dimensions might already be shown in another view. They might not be parallel to the plane of any of the drawing views. The dimensions might belong to parts and you have assembly views. Or something else. I recommend opening a ticket with PTC Tech Support.
@@CADPLMGuy The issue is trying to name a dimension or parameter "G". Creo cannot name things "G" cause it uses "G" as the gram abbreviation or the gravitational constant (I don't really know).
Okay. I'm not familiar with that issue. I recommend people submit a ticket with PTC Tech Support or post an enhancement request on PTC Community's Ideas board. Or call the parameter something other than 'G.' It might also not like it as g# is used for geometric tolerances.
Loving Your Work ❤️
Another use case is in piping. Using a plan sketch and an elevation sketch to get a full path. There is issue if either the plan or elevation sketches have straight lines that end up converging in the same perpendicular plane. You'll end up with a forked path, similar to the two chip example. The forked path has a complete path and a portion, the full path can be swapped with the order sketch selection. An example is if one sketch is a L, and the other sketch is P. Or L and H
Hello, what could be the reason then some model dimensions could not been shown in drawing? I have a dim from plane to plane, an extrusion depth, and others than can't be called to been shown in drawing in any view
There could be a number of reasons. The dimensions might already be shown in another view. They might not be parallel to the plane of any of the drawing views. The dimensions might belong to parts and you have assembly views. Or something else. I recommend opening a ticket with PTC Tech Support.
❤
When I Select G as A Common Name so it will be shown as a reserved Symbol. how can i use the reserved Symbol in the family table.
I don't understand your question. I suggest opening a ticket with PTC Tech Support.
@@CADPLMGuy The issue is trying to name a dimension or parameter "G". Creo cannot name things "G" cause it uses "G" as the gram abbreviation or the gravitational constant (I don't really know).
Okay. I'm not familiar with that issue. I recommend people submit a ticket with PTC Tech Support or post an enhancement request on PTC Community's Ideas board. Or call the parameter something other than 'G.' It might also not like it as g# is used for geometric tolerances.