Great job. Fantastic tutorial walk thru for a beginner. Intermediate/advanced level but found this very useful for others. Keep up the good work. New SUB
Is there a way to set up the chart in a way where you have the candles in one box, and the indicators in other boxes? That way you can look at them horizontally, instead of vertically
for all the years I have TOS I learn more from you on it's usage. Question asked to TOS; I would like to have a different color for hi lighting the options chains. I use the black screen and the purplish color blends into the black, is there a way to change to say yellow, or offsetting color.? Enjoy your tutorials and webinars. Thanks Semper Fi
Hi Donald - I am yet to uncover a way that you can change the highlight color from the purple. Even in the custom color layouts that highlighted portion can not be modified. You can try checking the high contrast box. and it makes it a slightly more pinkish hue, but I dont think there is currently a way to change color.
You would have to set that up as a custom indicator via the condition wizzard, or writing the ThinkScript. It can be done, but it will require some knowledge of the native ToS scripting language.
Thanks...Extremally valuable learn so many tips and tricks... What about pivot point setting, can be tricky as it clogs the whole chart... Very useful information... simplified it for us...
I set up an 8 chart grid on TOS however, none of the indicators show up. I have 3 indicators(lower) per chart. When I maximize each chart, the indicators are visible but can't be seen once restored. Is there a remedy for this? Thanks.
Great video by great teacher! Your explanation is very clear and informative! I have a question... Lets say I created 2 study sets (lets call them "TEST1" and "TEST2")... and lets say in TEST1 study set, I added "RSI" indicator and adjusted its setting (e.g. set "overbought" to "50" instead of default value "70")... now, if I want to add the same "RSI" indicator to TEST2 study set, instead of going through the same process again in TEST2 (i.e. manually adjusting the "overbought" value to "50" from default "70"), is there a way to "copy" the RSI indicator I created in TEST1 to TEST2 study set, so that I don't have to manually add & adjust the RSI in TEST2? I hope my explanation is clear... Thanks for your help!
Hi DN. There is no direct way to copy. You could load study set 1, make any other changes you want to add in study set 2 and then save it as a new set (study set 2). Other than that you could save the RSI settings as default and it would always load is 50 instead of 70. Hope this helps!
Please tell us how you’re able to draw on charts in TOS! I just asked their tech support and they said there isn’t any tool or way to do it 🤷🏻♀️ but you’re doing it…
Might just be you? It is a 4K video. Make sure you change the video quality to match your monitor. If you dont have a 4k monitor, drop the quality down to 1080p. it will look better.
Please don’t ever stop making your videos. Best technical trading education on youtube. You’re a legend
Thanks for the feedback Travis. The plan is to keep going for now!
Matt you are a wealth of knowlege. I am so grateful that I have found Trade Brigade and will continue learning from you.
I appreciate that!
I have been trading since 1982. I appreciate details and hard work. Your presentation was very well done. Two thumbs up!
Thanks for sharing all this knowledge, I’ve learned more from you than any other source
My pleasure Dan. Glad this was useful.
You are a fantastic teacher Matt, thank you!
Great lesson. Please continue updating the platform for newbees
Great job. Fantastic tutorial walk thru for a beginner. Intermediate/advanced level but found this very useful for others. Keep up the good work. New SUB
I know what I do later today - add study buttons! You do great videos! (with good speed, no fluff, excellent audio quality)
Thanks for that Cool! Study buttons as shortcuts certainly come in handy every now and again!
Liked before watching!!your videos are always the best!!please do more of one lot trades!!
Appreciate the support Roshan! Thanks for tuning in.
You're the best. Thank you.
Is there a way to set up the chart in a way where you have the candles in one box, and the indicators in other boxes? That way you can look at them horizontally, instead of vertically
Very well explained each step. Good job I said 👍🏻
Glad you liked it! Thanks for tuning in and taking the time to drop a comment.
Man thanks, this is really good , those tips so nice, i will apply all hope can work for me. Thanks again
Cheers Isabella! Thanks for tuning in and taking the time to drop a comment.
Very informative !! Thank you
Cheers GKGK. Glad you found value here.
Thanks for sharing all this knowledge
You got it Mohammed!
Another excellent video!
Cheers George! thanks for tuning in
Another great, informative, brilliantly video, Matt. Thank you
My pleasure! Glad you found it useful
Subbed after watching just 2 videos! Yo da man!
Welcome aboard! Thanks for tkaing the time to leave a comment and tune into a few videos. Hope to see ya in some more comments!
thank you for this ❤️ ..
sir plss make vdo on intraday trading strategy
Thanks for tuning in Sweet Pine. Join the discord for intraday trading!
for all the years I have TOS I learn more from you on it's usage. Question asked to TOS; I would like to have a different color for hi lighting the options chains. I use the black screen and the purplish color blends into the black, is there a way to change to say yellow, or offsetting color.? Enjoy your tutorials and webinars. Thanks Semper Fi
Hi Donald - I am yet to uncover a way that you can change the highlight color from the purple. Even in the custom color layouts that highlighted portion can not be modified. You can try checking the high contrast box. and it makes it a slightly more pinkish hue, but I dont think there is currently a way to change color.
Great video my friend
Thanks for the visit! Wishing you nothing but success in your Think or Swim journey.
Thank you for a great tutorial.
My pleasure! Thanks for tuning in and taking the time to drop a comment.
Good job
Can you do a video about multiple monitors on TOS? Your videos are the best out there. Thanks.
What do you mean by this? Monitor setup is independent of ToS.
Great, thanks.
One thing I cannot figure out is how to use an indicator as an input to another indicator.
Is it even possible on TOS?
You would have to set that up as a custom indicator via the condition wizzard, or writing the ThinkScript. It can be done, but it will require some knowledge of the native ToS scripting language.
Great video!! My issue with TOS is having my moving averages go from different time frames. Let's say 1hr to 1 day. I always have to put in a new set
Not sure what you mean? The moving averages should stay as the same on any time frame once they are setup.
Thanks!!! Excelente!!
very nice, thanks for sharing
You got it!
Thanks.
You got it couch! Glad you stopped by
can we add a buy & Sell signal to our setup?
Yes you can by creating a custom strategy. That might have to be its own tutorial video.
Thanks...Extremally valuable learn so many tips and tricks... What about pivot point setting, can be tricky as it clogs the whole chart... Very useful information... simplified it for us...
Set it to dots! It will make it look much better.
@@TradeBrigade good idea.. I was hoping I could get rid of the past pivot points.. But good idea.. looks much better..
I set up an 8 chart grid on TOS however, none of the indicators show up. I have 3 indicators(lower) per chart. When I maximize each chart, the indicators are visible but can't be seen once restored. Is there a remedy for this? Thanks.
You need a larger screen. think or swim will automatically hide lower studies if there isnt enough room.
REALLY helpful.
Glad it was helpful!
Great video by great teacher! Your explanation is very clear and informative!
I have a question...
Lets say I created 2 study sets (lets call them "TEST1" and "TEST2")...
and lets say in TEST1 study set, I added "RSI" indicator and adjusted its setting (e.g. set "overbought" to "50" instead of default value "70")...
now, if I want to add the same "RSI" indicator to TEST2 study set, instead of going through the same process again in TEST2 (i.e. manually adjusting the "overbought" value to "50" from default "70"), is there a way to "copy" the RSI indicator I created in TEST1 to TEST2 study set, so that I don't have to manually add & adjust the RSI in TEST2?
I hope my explanation is clear...
Thanks for your help!
Hi DN. There is no direct way to copy. You could load study set 1, make any other changes you want to add in study set 2 and then save it as a new set (study set 2). Other than that you could save the RSI settings as default and it would always load is 50 instead of 70. Hope this helps!
Well done.. Thank you.
Glad you enjoyed. Thanks for tuning in.
Please tell us how you’re able to draw on charts in TOS! I just asked their tech support and they said there isn’t any tool or way to do it 🤷🏻♀️ but you’re doing it…
Its a separate app called demo pro.
is this video super fuzzy or is it just me?
Might just be you? It is a 4K video. Make sure you change the video quality to match your monitor. If you dont have a 4k monitor, drop the quality down to 1080p. it will look better.
Thank you very much. Nice quick to the point tutorial. Truly appreciate that.
You bet! Thanks for coming out to the tutorial and taking the time to leave some feedback. Hope you have nothing but success with the ToS platform.
Please don’t ever stop making your videos. Best technical trading education on youtube. You’re a legend
Appreciate that. Hope you have a smooth time setting up ToS
Thank you for your extensive knowledge.
You bet Henry! Thanks for coming out to the tutorial. Hope you have nothing but success with the platform.