So good to see someone else match wiring color. I've traced tail light wiring that was butchered and five different colors used. Happy Thanksgiving to you and family.
I was really hoping your video would show it. 3 videos now havnt. I wanted to watch how you reinstall the start button brass pin ,spring and slide the contact into place and what holds it in place .
Haha! I just came across a somewhat similar situation. My 78 hawk tii had a starter button that had become less and less reliable with use. It worked fine most days then needed a wiggle of the button as it was pressed in to work, until it just quit making contact. My leg is getting tired starting this bike, so it's time to end the procrastination and dive in. I'm guessing the wire broke off like your project or the pin broke off. If the pin broke off, have any ideas on what to use to repair it?
Turns out mine was just really sludged up with gunk. I cleaned everything with electronic contact cleaner and scuffed all the contacts. Boom, it all worked. However, when I put it all back together I noticed the plastic was kinda warped. The screw that held the internal button assembly in wouldn't go back the way it was. I could persuade it, but the button was really sticky. I left the screw out and it works. You can't tell once the assembly is back on the bars Now, on to figuring out my blinkers, lol
i see that you have a few vintage bikes,i was wondering how much do 1976-78 honda cb400f super sport in good condition are selling for now a days? thank you....
Throughly impressed. You take tinkering to a new level man 😂
It wants to be fixed and someone has to do it. Thanks for watching. Happy Thanksgiving.
So good to see someone else match wiring color. I've traced tail light wiring that was butchered and five different colors used. Happy Thanksgiving to you and family.
Mismatched wiring makes me crazy. 😂 Happy Thanksgiving to you as well.
starts so well, an excellent example of to chase down a problem.
Thanks Ian. Really appreciate you watching.
I own a 1980 SR 500 in stock form so good to see you putting these old bikes back on the road where they belong!@@motorcyclerewind
I love your methodical approach to fault finding. If I didn’t have the same colour, I would have used heat shrink to cover it. Great little bike 🙂
I would have done the same thing with the heat shrink.
Well done! Def. repair over replace whenever possible! Happy Turkey Day!
This was a fun one. Always great when a plan comes together. Happy Thanksgiving to you and your family.
As always Eric,great job.Like your fault finding .
Thanks. I really appreciate you watching.
I was really hoping your video would show it. 3 videos now havnt. I wanted to watch how you reinstall the start button brass pin ,spring and slide the contact into place and what holds it in place .
Apologies.
thank you for this amazing video,i dont know much but it will help me in the future....
You’re welcome. Thanks for watching.
Hope you and your family have a Wonderful Thanksgiving! 🦃 👋🏻♥️
Thanks. Hope you do as well.
Haven't had this problem yet TG, good to know - thanks Sir. CB750F one of your projects?
It’s an easy fix. Just need to figure out where it’s broken
Its is a 1979 CB750k
A shop would have just ordered a new one, you had it fixed in less time than it would have taken to locate, order, receive and install the new part.
You’re right. Especially when they realize that to change the control you have to remove the handlebars. The wires run through them.
Great detective work!!!
They don’t call me Sherlock Holmes for nothing. 😂 thanks for watching.
What ever happened to the CB 750 engine build? Looking forward to that
It is together on the stand. Need to finish a few projects so I can put the 72 CB750 back together.
Another one fixed.
Someone has to fix em. Thanks for watching.
Haha! I just came across a somewhat similar situation. My 78 hawk tii had a starter button that had become less and less reliable with use. It worked fine most days then needed a wiggle of the button as it was pressed in to work, until it just quit making contact. My leg is getting tired starting this bike, so it's time to end the procrastination and dive in.
I'm guessing the wire broke off like your project or the pin broke off. If the pin broke off, have any ideas on what to use to repair it?
If the pin broke. Let me know I may have a button laying around.
@@motorcyclerewind wow! Thanks
Turns out mine was just really sludged up with gunk. I cleaned everything with electronic contact cleaner and scuffed all the contacts. Boom, it all worked.
However, when I put it all back together I noticed the plastic was kinda warped. The screw that held the internal button assembly in wouldn't go back the way it was. I could persuade it, but the button was really sticky. I left the screw out and it works. You can't tell once the assembly is back on the bars
Now, on to figuring out my blinkers, lol
Great explanation
Thanks for watching. Really appreciate it.
Great diagnostic s 👍
Thanks for watching.
Happy Thanksgivings
Same to you!!! Thanks for watching.
Really enjoyed it. Thanks.
Thanks it was fun. Thanks for watching.
i see that you have a few vintage bikes,i was wondering how much do 1976-78 honda cb400f super sport in good condition are selling for now a days? thank you....
The CB400f’s are great motorcycles. The will depend on condition and location. My guess would be between 1k to 8k where I am in New Orleans.
Real transformation with another bike
Thanks for watching. Really appreciate it.
In 71 you could just run & bump , not the new high comp models .
That’s right. That takes more energy than kicking it. 😂 thanks for watching.