Webinar: Fronius Smart Meter - correct installation and use of smart meter data
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2024
- This webinar explains the essential points for professional installation and commissioning, as well as the optimal use of the measured data with Fronius Smart Meters. Our experts will also explain special settings such as the dynamic power reduction or load management control. You can also learn more about the advantages of our "Energy Profiling" solution using multiple Fronius Smart Meters. Be there live and take the opportunity to ask your questions directly to our experts via live-chat!
Our new trainings: www.fronius.com/en/photovolta... - วิทยาศาสตร์และเทคโนโลยี
Hi. I have a fronius symo gen24, 8kw, fronius smartmeter 65ts-a3, on grid system.
When i turn on my cooktop, i get the following values on the meter's screen: L1 0.9, L2 -0.4, L3 -0.5. at the same time, the solarweb tells me thatbi use all the energy directly from the solar. At the same time, my utility meter says i consumed the sum of all the 3 values the smartmeter shows (without the -sign) meaning 1,8 kwh consumed
I need your advice about the specifications of the suitable CTs which can be installed with the mentioned smart meter (50 kA-3) Smart meter.
Thanx
Hi!
Please contact our support team with your comments at support@fronius.com.
Best regards, your Fronius Social Media Team
i mean i have issue that i cant install the smart meter, because my inverter cannot have cable connection due its in different building than the utility meter. and also power after utility meter splits in to 2 buildings. Do you have smart meter that is working wireless ?
I have a fronius gen24 symo 8kw. A fronius smart meter 5ka.
The soft limit control is set to 0W. The problem is that when energy is needed on phase 1, the inverter sends the needed energy equal to all phases, not to phase 1 which is in use. So, the smart meter, installed at the feedin point, shows (for example) 1,3 kwh on phase 1 and -0,4 on phase 2 and -0,4kwh on phase 3. And if phase 2 is used, the same goes: L2 1,3kwh and L1 and L2 both -4kwh. (Theese values are an example from 2 different tests made with a cooktop connected on phase 1, and an oven on phase 2)
What can i do to make it send energy to just the phase that needs the energy?
So on a 7000W system a Fronius symo 8.2.3 and a smart meter 65 A-3 Is all main components besides safety switches and fuses? Is Cat6 OK to run it 15 meters?
Hi! Yes CAT6 cables are good and also recommended for installation of the data communication.
Please make sure to stick to our installation guide for cabling the communication. Best regards, your Fronius Social Media Team
I have a Smart meter TS 65-3 and he works well in 3 phases with the batery, but when One phases spend a lot he get energy from the grid and put the same time and a same amount of energy on grid thrue the others 2 phases. What i missing on the configuracion? Please.
I dont see the dynamic option nowhere. .... Maybe this clip is old?
I am looking to buy Fronius Primo 8.2-1 non-light version and SMART METER TS 100A-1. The problem is that I don't have contract to feed to the grid and I have to limit it to zero. Can this be done ?
Hi! Yes of course! All our inverters can do zero-feed-in limitation.
You can set this limitation right at the first commissioning of the inverter.
Furthermore you can set the limit any time you want, after the installation in the settings of the inverter.
Best regards, your Fronius Social Media Team
No se para que queremos las instrucciones.si no hay smart meter de froniu.
How Smart Meter TS meter calculates the total of energy imported and exported?
A) the energy imported and exported is counted at each individual phase and then the Total is provided from the sum of those values.
or
B) the energy imported and exported is counted as a total power, with net differential readings from each phase cancelling each other out.
Hi! Our Fronius Smart Meter is measuring each phase individually and for now provides the total energy to the inverter, for visualization, monitoring and energy management. Best regards, your Fronius Social Media Team
It appears it is not possible to reverse measuring direction (in case old wiring is "load from above" and "grid from below". Sad, makes installation sometimes more complex/time consuming.
Hi! Yes, it is correct. It is not possible to interchange the measuring direction on the Fronius Smart Meter. Best regards, your Fronius Social Media Team
Ohmpilot price is nonsense. Nobody can even buy it. It will never pay back during years of use.
Hi! Please keep in mind that you save on several points with our Fronius Ohmpilot. You save on running costs like oil or gas for heating, and furthermore you can save on service costs for the main heating system. The Ohmpilot minimizes the operating hours of the main heating system, and therefore makes sure that the main heating system has a longer service life and less operating hours. Furthermore you have less heating losses. For example the main heating system does not have to heat the whole heating circle for heating up only a few liters of hot water on summer days.
So there are several point to save money with our Fronius Ohmpilot. Not only operating costs.
Please watch our Webinar on the Fronius Ohmpilot for more information: th-cam.com/video/VrWa_6GBWTY/w-d-xo.html
Best regards, your Fronius Social Media Team