In this video, I well show you how to replace Moto G5s Plus Display touch. Get OEM Replacement Parts for Moto G5s Plus : witrigs.com/d9imf OEM Screen Replacement for Moto G5s Plus: zegsu.com/s/dj4nd
Wish I had those plastic cards vs. the install kit I bought but with enough heat and swearing at my phone, this method worked! new screen is on and phone is working again. The kit I bought came with hex and philips not the star bit. Once I got the star bit at the hardware store, I was able to release the clamp and pull the little wire curcuits off and then reinstall new screen. I had a corner shatter so it was hard to pull that end up so I saved it for last as I heated and wedged up screen. Thanks for sharing this repair guide.
This video gives me the confidence to attempt a repair for my Moto g5s Plus cracked screen. If I am successful, the whole process should've cost 60 USD or less. - J
Where is your shop? i want to change my screen. as is seen no screen available at this time. What is the difference between OEM & custom? which is better?
Please provide link of where to purchase frame stickers/adhesive for XT1806. Witrigs website does not seem to carry it as the only similar product available for is G5 Plus, (the XT16XX).
My screen's adhesive doesn't get loose. I have tried with 125 Celsius temperature (I know it is higher than recommended), and tried heating for 3 minutes. I am using an SMD station for heating. What should I do?
Okay. I assembled my tools and was ready to go. I couldn't find a heat gun like the one featured in the video so I used my wife's hair dryer instead. I set it to the highest heat figuring hotter was better than anything else. I tried twice to heat the end with the finger print sensor. First time under heat was one minute. No movement with the suction cup. I tried running it two minutes but this time, the suction cup softened and the screen still didn't budge. If I heat the screen for more than two minutes and still doesn't budge, then what do I do? Taking it to a cell repair business is out of the question. The cost to repair rivals the price of a new phone.
Wit Rigs - I tried to heat my screen with a hair dryer. I let it run four minutes on the highest heat setting. It made the phone casing and lcd untouchable without gloves. Even with gloves, the light duty suction cup rubber becomes so soft, after pulling for a couple of seconds, the suction cup pulls off. I'm going to buy a heat gun tomorrow and reattempt to loosen the adhesive. If I'm unsuccessful, I may have to look into a heavier duty suction cup - something that will keep its form amid the heat coming off the screen. - J
Wit Rigs - You misunderstood what I wrote. First, I heated up the LCD screen with the hair dryer without to the suction cup attached. After heating up the LCD screen, I attached the suction cup and tried to separate the screen from the metallic case.
![KRK - ชนิสรา Ft.WanMai , N/A [Official MV] Prod. By Sakarin](http://i.ytimg.com/vi/C-WMwwYobcU/mqdefault.jpg)
In this video, I well show you how to replace Moto G5s Plus Display touch.
Get OEM Replacement Parts for Moto G5s Plus : witrigs.com/d9imf
OEM Screen Replacement for Moto G5s Plus: zegsu.com/s/dj4nd
Who else is. Watching this video on a cracked screen😝
bhai koi best option batao...saste mein kaam ho jaaye
🙄😥
Me haha.
me 😂😂
Did any of y'all fix your screens my screen is cracked really bad right now LOL
Wish I had those plastic cards vs. the install kit I bought but with enough heat and swearing at my phone, this method worked! new screen is on and phone is working again. The kit I bought came with hex and philips not the star bit. Once I got the star bit at the hardware store, I was able to release the clamp and pull the little wire curcuits off and then reinstall new screen. I had a corner shatter so it was hard to pull that end up so I saved it for last as I heated and wedged up screen. Thanks for sharing this repair guide.
Do you have a link for the adhesive sheet you used here?
This video gives me the confidence to attempt a repair for my Moto g5s Plus cracked screen. If I am successful, the whole process should've cost 60 USD or less. - J
There seem to be kits for 20-30
Where can I get the adhesive for Moto g5s plus?
Where is your shop? i want to change my screen. as is seen no screen available at this time.
What is the difference between OEM & custom? which is better?
The best screen is the oem because it is the original
Thank you for this great video. Even though I sadly cut through the fingerprint cable the rest works like a charm!!!
This tutorial really helped me! Thanks guys!
that intro almost killed me
Please provide link of where to purchase frame stickers/adhesive for XT1806. Witrigs website does not seem to carry it as the only similar product available for is G5 Plus, (the XT16XX).
Link: www.witrigs.com/witrigs-lcd-supporting-frame-sticker-for-motorola-moto-g5s-plus
please provide the link for where to buy the screen digitizer from for moto g5s plus
www.witrigs.com/oem-lcd-screen-with-digitizer-for-motorola-moto-g5s-plus-lunar-gray
I can get u moto g5s plus screen digitizer for 699 only
@@Steve-yw9bo how come
Does cash on delivery method available
link for the kit for the adhesive kits
where to get the sticker for the fingerprint sensor? because it is not part of the kit.
Use any other adhesive
After pasting adhesive rap some tape on the screen for few hours
Moto e4 ka touch digitizere change kiya ja shakta ha ap mujhe bataiaga please sirf touch lcd nehi
Thanks 4 share!
Can I get a link to buy rear camera glass cover for Moto g5s plus.
It's out of stock now, here is link: www.witrigs.com/oem-camera-glass-lens-for-motorola-moto-g5s-plus
It's back in stock now. You can order it :-)
My screen's adhesive doesn't get loose. I have tried with 125 Celsius temperature (I know it is higher than recommended), and tried heating for 3 minutes. I am using an SMD station for heating. What should I do?
I need to change the display to my mobile
So
Please tell, I'm in living at vizag
Moto G5 s plus
after replacing the screen will there be any dust entering inside the front camara???????
thats up to you
Se le saluda amigo xfa el moto g5s plus usa Mica y taicti o solo taicti y sí son iguales la del 5 y 5s gracias
I need to change the display to my mobile
So
Please tell, I'm in living at vizag
Where do I buy a new screen for. Moto g5s plus.
Hi, here is the link www.witrigs.com/oem-lcd-screen-with-digitizer-for-motorola-moto-g5s-plus-lunar-gray
I want a website in India
and if what I want is to change the housing?
link for the lcd screen replacement please
th-cam.com/video/CLZsCEriFKc/w-d-xo.html
Perfect
Okay. I assembled my tools and was ready to go. I couldn't find a heat gun like the one featured in the video so I used my wife's hair dryer instead. I set it to the highest heat figuring hotter was better than anything else. I tried twice to heat the end with the finger print sensor. First time under heat was one minute. No movement with the suction cup. I tried running it two minutes but this time, the suction cup softened and the screen still didn't budge. If I heat the screen for more than two minutes and still doesn't budge, then what do I do? Taking it to a cell repair business is out of the question. The cost to repair rivals the price of a new phone.
If your LCD screen is broken, you can use a hobby knife and suction cup to makes a slit after heating. Than use the card to fixation the slit.
Wit Rigs - I tried to heat my screen with a hair dryer. I let it run four minutes on the highest heat setting. It made the phone casing and lcd untouchable without gloves. Even with gloves, the light duty suction cup rubber becomes so soft, after pulling for a couple of seconds, the suction cup pulls off.
I'm going to buy a heat gun tomorrow and reattempt to loosen the adhesive. If I'm unsuccessful, I may have to look into a heavier duty suction cup - something that will keep its form amid the heat coming off the screen. - J
Do not heat the suction cup, you need to heat the LCD screen and then use suction cup.
Wit Rigs - You misunderstood what I wrote. First, I heated up the LCD screen with the hair dryer without to the suction cup attached. After heating up the LCD screen, I attached the suction cup and tried to separate the screen from the metallic case.
Oh, sorry. You are right to do so.
Once I connected the new screen, it started but random numbers began filling out the password and wouldn't stop. Is it over? Am I dead?
Maybe
I recommend just going to Motorola's website and paying them to ship you a replacement phone
Why?
not so easy to do when the screen is cracked and the adhesive that I got is just one big sheet and not pre cut... WTF??
What's your shipping number, please? I'll check it for you.
How much is that
I need change to my toch my monile
sir LCD CHANGE karane m cost Kya ata h
Please provide a screen for also Moto g5s
Kitne ka khrcha aata h original screen m
2400 tbhi toh m ye dkhra hun lol
Plz tel me
👍👌👌👌