I only replaced the switch on my 2013 Pathfinder and it's less than 10 min fix. I ordered my switch for $60 @ coulter nissan. Recieved it in a few days. Pry the 4 black plugs, pry the back panel off. I pryed the side clips of the switch inward until it came out of the trim piece. I used a small precision flat head. When the switch is out, go back inside the hatch and just push the small white tab to remove the old wiring pigtail. Fish it out from the outside where the switch is dangling from the chrome trim. Put the new switch in starting with the white clip and fish it in. Plug the white clip in to make sure it works and test it. If it works, just push the new switch in and you'll hear the side clips engage. Reassemble the back panel. To put the 4 plugs back in, push the lower part down then insert into hole and push the head in. I was super happy it took 10 minutes!
NOTES FOR FINISHER ASSEMBLY REPAIR: (did this with a 2017 Pathfinder) to remove the entire finisher assembly you will need an 8mm socket for your ratchet. there are TWO screws attaching the finisher assembly AND TWO screws hold the back up camera 1. at 1:29 you have to remove that rectangular handle (it is on the right side of the panel, left of screw) you should do this after you remove the rivet/screws. 2. you also have to remove the back up cam (he doesn't show this) the cam is attached to the assembly with 2 screws (you need a really small screwdriver for this) 3. at the end, when you push the rivets BACK IN to mount the back panel, the rivets have a plunger type action and you have to pull it open then push in...you can't push these in UNLESS they are "popped up", push in, they pop back down and fasten bought finisher assembly it online at HGreg Nissan in Palmetto, Florida for $140 (on sale) good luck!
You should buy only the switch the expensive one was the chrome about $200 plus I don’t know why Nissan doing this the button was so sensitive mine broke right away someone try to open by the chrome it was loose and fly on the road now I have to change both thank you for sharing
I would like to know where you got the part and how much. I need to do the same thing to my 2018. The reason mine broke was because the seal around the hatch door sticks. What I did was put some axle grease on 3/4 around the seal and that has kept is from sticking.
Have the same issue here but the whole plastic chrome section came off. Ordered the part at the same place you got it CEM T Channel should I arrive soon. FYI Don't waste your time at your local dealer will rip you off with a $280+ part and install add $100 per hr. ridiculous!!!
@@andresusilo1 Yes I was able to fix it. Is very simple to do it. Go to Google and type the part# Nissan 90810-9PG2D should give you few options pick the best one
Paulo Tierra www.prioritynissanparts.com/oem-parts/nissan-finish-molding-908109pg2d?origin=pla&gclid=EAIaIQobChMIn9qKzfnK5wIVxcDACh3ySw7eEAQYAiABEgKvhfD_BwE
Never buying Nissan again ... a bunch stuff already broke on my pathfinder. Junk Radiator Fan, Shocks, rust, door latch not locking, trunk button busted, I hear the front wheel bearings going out. Less than 100K miles on the SUV.
I only replaced the switch on my 2013 Pathfinder and it's less than 10 min fix. I ordered my switch for $60 @ coulter nissan. Recieved it in a few days. Pry the 4 black plugs, pry the back panel off. I pryed the side clips of the switch inward until it came out of the trim piece. I used a small precision flat head. When the switch is out, go back inside the hatch and just push the small white tab to remove the old wiring pigtail. Fish it out from the outside where the switch is dangling from the chrome trim. Put the new switch in starting with the white clip and fish it in. Plug the white clip in to make sure it works and test it. If it works, just push the new switch in and you'll hear the side clips engage. Reassemble the back panel. To put the 4 plugs back in, push the lower part down then insert into hole and push the head in. I was super happy it took 10 minutes!
NOTES FOR FINISHER ASSEMBLY REPAIR:
(did this with a 2017 Pathfinder)
to remove the entire finisher assembly you will need an 8mm socket for your ratchet.
there are TWO screws attaching the finisher assembly AND TWO screws hold the back up camera
1. at 1:29 you have to remove that rectangular handle (it is on the right side of the panel, left of screw) you should do this after you remove the rivet/screws.
2. you also have to remove the back up cam (he doesn't show this) the cam is attached to the assembly with 2 screws (you need a really small screwdriver for this)
3. at the end, when you push the rivets BACK IN to mount the back panel, the rivets have a plunger type action and you have to pull it open then push in...you can't push these in UNLESS they are "popped up", push in, they pop back down and fasten
bought finisher assembly it online at HGreg Nissan in Palmetto, Florida for $140 (on sale)
good luck!
Our 2013 lost just the chrome plastic piece but the camera and latch work just fine. Do you have a full video of how to replace it?
I’m sorry I only have this video. But yeah not too hard to replace
I just need to replace the lift button. It cost like 17 dollars on ebay. Can you show me how to replace it?
yes i am in the same boat. I need to replace the lift button on my 2014 nissan pathfinder
Thank you so much for this video. I have the same problem on my 2018 Nissan Pathfinder...Thanks to your video, now I know I can do it myself...
You may want to call your local nissan dealer. Your car is still under warranty. I m gona call mine too.
@@ranimouf did dealer accept responsibility
@@alrid3108 no. Mine just went out of warranty. Worst warranty in the industry. Only lasts 3 years or 32 k miles.
Lik seriously 😮you didn't show us how you take them out . How did you fix back the camera.. thanks for notting..
Did you find a good video? I really need help and most videos suck
Mine is only 3 years old and it s already broken. 36000 miles on the car and l don't know if it s still under warranty.
Yeah... the camera angle, the moving, lack of explaining and the slow voice... 👀 No help at all...
I have standard Pathfinder 2014 if I get the camera I can linked it to my dash ? As it's comes without camera ?
When you order the parts just filter your vehicle model year then it will be fit
hey dude thanks for the video,but why did u skip some parts of it , little confusing . thanks for nothing.
You should buy only the switch the expensive one was the chrome about $200 plus I don’t know why Nissan doing this the button was so sensitive mine broke right away someone try to open by the chrome it was loose and fly on the road now I have to change both thank you for sharing
Is the nut a 10mm?
I have 2013 Platinum are you sure it’s the same 2013 to 2020 if so I’m gonna save a lot of money I can’t find one for anything between 2013 to 2016?
Yes when you buy it they will have the option that make your car model and year. Just make sure fit your car year
oh you have to replace the whole thing
where did u buy it?
Go to google Type: nissan 90810‑9pg2d it will show you the parts and Nissan website on there
I couldn’t see anything. How did you remove the assy part?
Samehere.
What is the part number for the part that you replace
jose torres NISSAN 90810-9PG2D
@@cemtchannel4230 Was ths the whole assembly ? as you see on your video chrome finishing moulding aswell ?
My daughters 2013 just broke. Thanks for doing the video! It saved me some grief!
For 2013, what was part number?
What is the part number and from where did you order it?
Go to google then type: Nissan 90810-9PG2D. Build your car year and model, make sure to get the right parts that fit your car
Thanks because mine is 2018 nissan pathfinder i think the same fit to that year
Where did you buy that part for your car?
Nissan simple parts can not make it right. Glad you know how to fix and thanks for sharing.
Thanks for the video. Any chance you could provide the name and part number. Thanks in advanced.
I would like to know where you got the part and how much. I need to do the same thing to my 2018. The reason mine broke was because the seal around the hatch door sticks. What I did was put some axle grease on 3/4 around the seal and that has kept is from sticking.
What is the actual name of this part? I can't find it anywhere.
Write down on google Nissan trunk opener or Nissan Pathfinder finish molding, then it will show some for you on eBay and any websites
I’m still unable to find the part, even after searching the methods in other comments
Great job 👏 unfortunately Nissan has gone down hill, ours broke the same way. 36,000 miles. Junk.
Have the same issue here but the whole plastic chrome section came off. Ordered the part at the same place you got it CEM T Channel should I arrive soon. FYI Don't waste your time at your local dealer will rip you off with a $280+ part and install add $100 per hr. ridiculous!!!
Hello were you able to fixed yours? Can you tell me where did you order the parts from? thanks in advance
@@andresusilo1 Yes I was able to fix it. Is very simple to do it. Go to Google and type the part# Nissan 90810-9PG2D should give you few options pick the best one
Thank you sir! Your video help save me time, frustration and money. Thank you.
could you not just get the replacement switch instead of the whole trim piece ?
did you figure this out?
Can you put up the link from where you bought it.
Paulo Tierra www.prioritynissanparts.com/oem-parts/nissan-finish-molding-908109pg2d?origin=pla&gclid=EAIaIQobChMIn9qKzfnK5wIVxcDACh3ySw7eEAQYAiABEgKvhfD_BwE
@@cemtchannel4230 hello the link is not working
Hi, where did you buy it? Thx
Benson Liu Order online. You just go to google and type Nisan trunk opener, then it will shows up on there and that is from Nissan
what happen to yours
why not just take it out gorilla glue it and put it back? worth a try instead of paying $380 at the dealer.
That would make the most sense. Do you take out the chrome plastic pannel then gorila glue the edge of the lift button?
@@alee0294 i tried that but it kept coming off. So had no choice but to buy a new piece. Good luck.
@@KillaMC305 the entire Chrome panel? I see that the actual lift button cost under 30 dollars on eBay
Where did you get your parts?
Amazon sells it
Great vid, you got the replacement from your dealer?
No I ordered it
@@cemtchannel4230 from where did you ordered it? I need the exact same thing.
You didn't show anything
Xiexie! This just happened to our 2014.
Never buying Nissan again ... a bunch stuff already broke on my pathfinder. Junk
Radiator Fan, Shocks, rust, door latch not locking, trunk button busted, I hear the front wheel bearings going out. Less than 100K miles on the SUV.
Same problem at my car twice...huhhh
Bad video
Terrible video .. smh....
Where did you order your parts?
Type on google Nissan Pathfinder trunk opener then filter your car model and years. It’s from Nissan part website