Hi good demo, I’ve had one for 4 days, and yes tuning with practice does become easier more intuitive. I do get a very marked noise increase when tuning/ then fine tune on TX. Just a point, when switching from 40m to 20m you didn’t show the capacitor switch being altered back. The switch on my version is on the control box - something to consider if siting in the loft! Well done thanks for sharing. 73 de - Barnie M7PBX.
Hi After viewing your very nice video I bought one of the same 8 band Magloops. These loops are really light well put together and nicely portable. I have had some good results on digital modes with 2-3w on 17m especially. In your demo in switch '1' position the single loop you showed a VSWR of 1.6:1 on 10m and in switch '0' position the dual loop you showed a VSWR of 1.4:1 on 40m. Were these VSWR results typical of the rest of the bands in the two switch positions or were these best cases. Just asking because my loop is really excellent on all bands in switch '0' all VSWR's below 1.7:1 with best on 30m of 1.15:1. However in switch '1' position they are not so good typically around 3:1 VSWR. These were measured with a NanoVNA just like yours. Any thoughts as to what I could be doing different to you? Many thanks Trevor G0MKZ
Hi good demo, I’ve had one for 4 days, and yes tuning with practice does become easier more intuitive. I do get a very marked noise increase when tuning/ then fine tune on TX.
Just a point, when switching from 40m to 20m you didn’t show the capacitor switch being altered back. The switch on my version is on the control box - something to consider if siting in the loft!
Well done thanks for sharing.
73 de -
Barnie M7PBX.
Enjoyed the demo of this particular radio/antenna configuration. Cheers! 73 KH7AD
Very fine tuning for Ssb?
I wanted one but thr tuning drove me crazy went with e vertical
where do you get the remote relay to replace switch ?
Nice informative video. Can the loop also be tuned manually?
Hi After viewing your very nice video I bought one of the same 8 band Magloops.
These loops are really light well put together and nicely portable.
I have had some good results on digital modes with 2-3w on 17m especially.
In your demo in switch '1' position the single loop you showed a VSWR of 1.6:1 on 10m
and in switch '0' position the dual loop you showed a VSWR of 1.4:1 on 40m.
Were these VSWR results typical of the rest of the bands in the two switch positions or were these best cases.
Just asking because my loop is really excellent on all bands
in switch '0' all VSWR's below 1.7:1 with best on 30m of 1.15:1.
However in switch '1' position they are not so good typically around 3:1 VSWR.
These were measured with a NanoVNA just like yours.
Any thoughts as to what I could be doing different to you?
Many thanks
Trevor G0MKZ
Any news on that steppa motor ? I have this loop and turning is a pain with the 705. Haven't made contact in about two weeks
I sold my loop at the Newbury Hamfest in 2023 as I found I was not using it.
Yeah, I just got one, not very impressed, seems fussy and deaf, and a nightmare to tune 😕@@PyroBrit
Thanks for the informative video. G0RJM