What do you do if you need to retouch a side? I work with regular resin, not UV, so even if I carefully paint one side, some of the resin drops along to the bottom or to the other side. Maybe nail polish?
oh I really cannot tell what to do because every case is different, but I cannot stress this enough - do not use nail polish on resin EVER. It will only look good for a short period of time and will get ugly within weeks ;/ hope this helps ;)
Thank you so much. I made a ring for my daughter and did not fill the mould enough. I was a little intimidated by the resin I think. 8 am a new Subscriber.
Thank You so much for your support!!!🤗🤗 I am planning to make more resin videos, and if you are interested in something specific share idea and I will try to help you😊
I really don't know... but I think it shouldn't be days, and more like hours... Perhaps couple hours? You need to try and see to be honest :) size of your piece also matters :)
Thank You for watching 😊 no I don't use paste or anything like that. I tried but that seemed more messy for me than just leaving it as it is😊 can you recommend a good paste to try?😎
@@thegarciafamily9433 that's the thing with resin. It's either You mixing wrong proportion, or the resin is bad. I had that experience when I started, changed resin and it worked wonders! ;)
Hello, thanks for watching 😊 I use fine grit sand paper, some people use manicure rotary tool ( i imagine like a drill) its up to you what you have and what you are willing to try☺️✌️
I don't know that... When I bought my molds I checked the sizing in product description, so it would fit at least my fingers😁😁😁 and happens to be that my finger size is very average 🤣 If I understood your question correctly, I don't know if you can order custom size molds, but you can make them pouring your own silicon molds✌️🤗
Hi, im beginning to make resin rings but after my rings are under the uv light, they have those lines on the rings :( Did I do something wrong or was the uv light too hot? Thank you.
Hey, I am not sure what lines but maybe there is lines in the mold you using? However, if you think it is the uv light to blame try to leave your resin rings in the sun for good couple hours instead of using uv light, and see if the lines happen this way✌️🙂🙂
Well, I don't use it all the time, unless I do a lot, however, it is up to you to decide, sure protection won't hurt at any point, but also check the resin you work with, some of them are toxic before cured, some of them not☺️
If you want to use quick drying resin you need to buy uv resin. Epoxy resin dries in few hours or days, depending on brand. Also must be mixed in perfect proportion ✌️ hope this helps
Thank you so much, this video was very helpful want to make my granddaughter a few rings! Liz x
Happy to help😊
@@MonikaDoodle 💕
I adored your video and comentary😂💖much love!
Thank You so much ☺️
Thanks for sharing🤗
found this video very helpful, thank you :)
Very happy to help 😊 feel free to ask if you have questions 😉😉
Ty for this tutorial I’m trying to make some for gifts and they come out too thick and not smooth so this helps so much ❤
Wow that is so great! Thank you for your nice words, it’s very nice to be useful 🤗 and handmade gifts are the best!
What do you do if you need to retouch a side? I work with regular resin, not UV, so even if I carefully paint one side, some of the resin drops along to the bottom or to the other side. Maybe nail polish?
oh I really cannot tell what to do because every case is different, but I cannot stress this enough - do not use nail polish on resin EVER. It will only look good for a short period of time and will get ugly within weeks ;/ hope this helps ;)
Your SOOO prettyyy!!!💓💓💓
He he. Thank You 😊 not that difficult, just takes patience and time to learn 🤗🤗
Thank you so much. I made a ring for my daughter and did not fill the mould enough. I was a little intimidated by the resin I think. 8 am a new Subscriber.
Thank You so much for your support!!!🤗🤗 I am planning to make more resin videos, and if you are interested in something specific share idea and I will try to help you😊
@@MonikaDoodle I appreciate that. Thank you. I hope your account grows from strength to strength.
What grit of sandpaper do you use?
Anything above 400✌️😎
I think I’m going to try the u v first I don’t like all the complicated mixes and stuff
I know… it can be too much mess, and they smell really strong compared to uv resin🤢😂
Hi
I use regular resin not uv. My ring became rubbery not hard😢
What should i do?
How many days will it take to dry in sun instead of the uv lamp ?
I really don't know... but I think it shouldn't be days, and more like hours... Perhaps couple hours? You need to try and see to be honest :) size of your piece also matters :)
Thank for the vedio…I have a question.Can we pastal color / crayons with resin?
I have no clue 🤷♀️ perhaps? Try and let is know😎✌️
I can use something other than resin?
I don't have resin 💔😔
Well, I think you can find what else can you make ring of here on TH-cam 🙂
Ok Thanks 😁
Thank you 😊 your video is fun. More! X
Thank you so much 🥰 will be more for sure🤗
Thanks for the video! Do you use any kind of polish paste to make them shiny?
Thank You for watching 😊 no I don't use paste or anything like that. I tried but that seemed more messy for me than just leaving it as it is😊 can you recommend a good paste to try?😎
@@MonikaDoodle I’m looking for one :) when the rings are cured, they seem to be a little sticky and Once I touch them, they’re no longer shiny
@@thegarciafamily9433 that's the thing with resin. It's either You mixing wrong proportion, or the resin is bad. I had that experience when I started, changed resin and it worked wonders! ;)
@@MonikaDoodle out of curiosity, what resin works best for you?
Great video! 😊 and ring! you should do more colours too🐱🤗
Will be... Will be😊🤗
i have a question for u use any thing for sanding because i bought and kit and im a beginner so idk what to use
Hello, thanks for watching 😊 I use fine grit sand paper, some people use manicure rotary tool ( i imagine like a drill) its up to you what you have and what you are willing to try☺️✌️
How many grits was the sandpaper that you used please ?
Hello, depending on what you want to sand off... I use rough one (200) for big imperfections and at least (600) to smooth things out nicely
@@MonikaDoodle okay thank you so much.
Omg ur so funny I love this!!!💜💕
Thank You 😌 I hope tutorial helped🤗✌️
what kind of resin did you use? if you dont mind me asking! its hard to narrow it down to good quality ones
I really don't know the brand... On the bottle it says uv resin and I get it from ebay usually....✌️
Do you just put resin on the ring to gloss it without the hardener?
It is uv resin. It hardens under the uv light, or just sun, just takes longer🙂
Hi, I have a question, do the ring templates have any finger sizes?
I don't know that... When I bought my molds I checked the sizing in product description, so it would fit at least my fingers😁😁😁 and happens to be that my finger size is very average 🤣
If I understood your question correctly, I don't know if you can order custom size molds, but you can make them pouring your own silicon molds✌️🤗
How many rings can you make per ml?
Honestly, no idea😁 but for sure 1ml won't make a single ring, i think ✌️☺️
@@MonikaDoodle okay thank you ❤
Hi, im beginning to make resin rings but after my rings are under the uv light, they have those lines on the rings :( Did I do something wrong or was the uv light too hot? Thank you.
Hey, I am not sure what lines but maybe there is lines in the mold you using? However, if you think it is the uv light to blame try to leave your resin rings in the sun for good couple hours instead of using uv light, and see if the lines happen this way✌️🙂🙂
I see, thank you so so much
Thank You ☺️☺️ very happy to help
where did you get the mold? ive been trying to find molds that arent too thick or chunky
I think this one is from wish, or AliExpress 😊
Is it resin harmful? should i really to wear the safety precaution?
Well, I don't use it all the time, unless I do a lot, however, it is up to you to decide, sure protection won't hurt at any point, but also check the resin you work with, some of them are toxic before cured, some of them not☺️
@@MonikaDoodle alright! Thank u so much for answering
Where do you get your molds for the rings at?:)
Hey, you can find them on eBay, wish, AliExpress and so on✌️
Hi after sanding mines blurry what polish you use. Can you do a tutorial on it?
Thanks for watching! I will try to make one🤓
and do u sell ur work well ??
Yes I do😊
My epoxy resin did not dried up
If you want to use quick drying resin you need to buy uv resin. Epoxy resin dries in few hours or days, depending on brand. Also must be mixed in perfect proportion ✌️ hope this helps
😍😍😍
Hi
Hi! Please use a mask while doing it because if you don’t it can cause health complications