After seeing my install Hansshow is making a dual plug harness for cars with working fog lights like mine for model Y and 3. This will make it easier to intall.
Not in production yet. I ordered last December and I don’t have the dual harness still but THANK YOU for being an “a*hole” 😂 you made it easier for everyone including me. Quick tip: Your design is such an inspiration so I tried to be you. An “a*hole”. 😂 I experimented by removing the Hansshow provided harness connector and swap it to the factory connector using push pin tool. Eureka..! It worked..!! No need to cut wires and use the jumper. Plugs right in to the foglight connector..
Thanks for your video, and the workaround. I bought a set of these for my M3SR+ a year ago, but before I installed found out they would (finally!) introduce the Model Y to Japan. Was going to sell the fog lights, but EV Offer said they would fit my '23 MYP. They were partially correct, as they do indeed physically fit into place, but the connector was different ... just like yours. Your experience helped to to do my own workaround, and they now function properly. Glad I looked around and found your install ... before I put the OEMs back and and gave up! Cheers from Yokohama, Randy
Brian I discovered by using the feed from the camera turn signal it worked also the fog button works as it should I soldered the wire that makes a permanent connections I also found that the plug did fit straight in using the original loom I have asked hanshow to make yellow cable longer thanks for your video let me know what the purple wire for thanks as as alway for your take regards Mal
Got these almost 2yrs ago from Ali X Press. I had to run that wire all the way to the back under the rear passenger side deck speaker. (m3) . Not difficult if you are use to doing basic installs.
I have a 2020 model LR with stock fog lights. All the reviews say they are plug n play and just tap into the camera for the signals. Should I be concerned about the cable not fitting or is that just a model Y? Also the connectors you have listed from Amazon. Is that the recommend T connector I’ve seen others have mentioned for the side camera turn signal? Thanks
Today I saw an article that said the Tesla repair manuals are now free but the software price has increased. Maybe you can find out what the purple wire is for.
Hey there, I'm from NZ and i have the 2022 RWD Model Y. This model doesnt come with ANY fog lights at all, just some black plastic covers so I'm assuming there is zero wiring for any fog lights to be installed. If i bought these fog lights, would the wiring harness included with those fog lights be enough for me to install it? Could i link it up to the headlights or the side indicators? Thanks.
Question ... do you lose your foglight indictator light on the screen? With my model 3 install, the new lights work fine, but I do not get the indicator light on the screen when I turn the fog lights on. When I switch back from parking lights on to headlights on, I can see the foglight flicker, as if there is a signal there but not strong enough? Let me know if you have this problem,
I installed the right side light only and the tried to test only got the signal to work and the fog and parking doesn't. Do you have any ideas what happened? Thanks
Hi is your Model 3 comes with an OEM fog light or no? im wondering if i can use the same method as you did for my Model 3 standard range with no Fog Light….as hansshow and some other review recommend to tap it into the Tail light which is too much work
I am planning to order them but I live in Canada. I see free shipping, will be using your code. Do they provide warranty? How are they treating you so far? Let me know your experience. Normally OEM foglights are automatically switch on and off I believe, can you set the same calibration for these as well? I have M3, I believe they are the same for both. Thanks
Hey Brian, So if I turn on fog lights does all lights turn on or just the one like stock? If all lights turn on then then is it just DRLs or is it actual fog light?
I got a question for ya. I’m currently waiting for my model Y performance. I live in colorado and wanted to run the 21’s in the summer, but during the winter I wanted to get smaller wheels and either the Goodyear duratrac tires or the nitto ridge grapplers. Do you think that’s the best option for looks? I love the beefy aggressive look. What do you think those tires would do to performance?
Mike I am in Colorado as well, on my M3P during the winter I put on 19inch Pirelli Winter Sottozero's Fantastic winter tire, Martian wheels are super popular as well.
Hi! I'm a subscriber watching your videos in Korea! This time led mirror covers are newly released, will that wiring work even if I use the side camera wiring? what do you think??
I like them except for the fact that the turn signals are sequential. IMO, it looks stupid having one turn signal flash while one is sequential… and they’re just in hard apart. If they were solid flashes like the turn signal in the headlight housing, I’d order a set.
I want to advise my technician to do it like you the way you did it instead of going all the backward causing mess. Can you please confirm that yours running fine? Will it cause any problem to side cameras? Thank you :)
Try it on this link www.hautopart.com/products/model-3-y-front-fog-light-led-sequential-turn-signal?variant=42510686945492&fbclid=IwAR3PXYIUD5d6wmhXpYZ3H19o2snWI4Y29fkPrqzRV96IYV3O7i1tGGzrBMo
I believe the extra purple wire is for the amber that is in the stock foglight on Model 3, they probably use the same harness. th-cam.com/video/RTunN6DSSDA/w-d-xo.html
It was it 6 screws and solder connection and it was done my plug fitted perfectly it was little hard to put the plug into the loom but once in the look brilliant and they 5x brighter
It looks pretty good - but to me it doesn’t look like what tesla would come up with for the swipe turn feature but still cool. The old fog lights ran on TPS92515 IC’s - an awesome little dc dc converter current source creator!
After seeing my install Hansshow is making a dual plug harness for cars with working fog lights like mine for model Y and 3. This will make it easier to intall.
Install*
Not in production yet. I ordered last December and I don’t have the dual harness still but THANK YOU for being an “a*hole” 😂 you made it easier for everyone including me.
Quick tip: Your design is such an inspiration so I tried to be you. An “a*hole”. 😂 I experimented by removing the Hansshow provided harness connector and swap it to the factory connector using push pin tool. Eureka..! It worked..!! No need to cut wires and use the jumper. Plugs right in to the foglight connector..
For those with non fog lights like standard range all you do is tap into purple for power.
@@Nutsofamily thanks!
Great foglights with turn signals and animation, Brian!
@LaMelo Ball Heck yes, Mello Balls!
Thanks for your video, and the workaround. I bought a set of these for my M3SR+ a year ago, but before I installed found out they would (finally!) introduce the Model Y to Japan. Was going to sell the fog lights, but EV Offer said they would fit my '23 MYP. They were partially correct, as they do indeed physically fit into place, but the connector was different ... just like yours. Your experience helped to to do my own workaround, and they now function properly. Glad I looked around and found your install ... before I put the OEMs back and and gave up! Cheers from Yokohama, Randy
The modifications you make to all of your cars are amazing to watch!
Brian I discovered by using the feed from the camera turn signal it worked also the fog button works as it should I soldered the wire that makes a permanent connections I also found that the plug did fit straight in using the original loom I have asked hanshow to make yellow cable longer thanks for your video let me know what the purple wire for thanks as as alway for your take regards Mal
So you start out with a white car and when you show them at night the car changes color??
I don't like the fact that this upgrade eliminates the ber side marker light. That makes the car less visible unless I'm missing something
Got these almost 2yrs ago from Ali X Press. I had to run that wire all the way to the back under the rear passenger side deck speaker. (m3) . Not difficult if you are use to doing basic installs.
That looks awesome definitely a must have
hi there, do you know if in standard range version is already present the connector to install fog light ??
I have a 2020 model LR with stock fog lights. All the reviews say they are plug n play and just tap into the camera for the signals. Should I be concerned about the cable not fitting or is that just a model Y? Also the connectors you have listed from Amazon. Is that the recommend T connector I’ve seen others have mentioned for the side camera turn signal? Thanks
Great video. Quick question if the clips for the fog lights break off can you replace them or must you buy a brand new pair of dog lights?
the plug works with all cars you dont need a jump cable
My plug couldn't fit. I tried for like 10 minutes.
It was difficult but it did work with a push
Today I saw an article that said the Tesla repair manuals are now free but the software price has increased. Maybe you can find out what the purple wire is for.
I love Hansshow and Brian!
Hanshow make great products I mentioned to them about making yellow lead longer they agree not many manufacture listen they certainly do
What would the boombox and fart noise sound like if you replace those horns with a diesel horn?
The fart noises don't come from those. There is a speaker on the other side for that
Purple wire is for the side marker light.
For the T tap's for sealing/moisture/water possible to use Dielectric grease.
Great video! Do you know of any way to use the Headlights amber turn signal to be turned on as DRL?
Hey there, I'm from NZ and i have the 2022 RWD Model Y. This model doesnt come with ANY fog lights at all, just some black plastic covers so I'm assuming there is zero wiring for any fog lights to be installed. If i bought these fog lights, would the wiring harness included with those fog lights be enough for me to install it? Could i link it up to the headlights or the side indicators? Thanks.
Question ... do you lose your foglight indictator light on the screen? With my model 3 install, the new lights work fine, but I do not get the indicator light on the screen when I turn the fog lights on. When I switch back from parking lights on to headlights on, I can see the foglight flicker, as if there is a signal there but not strong enough? Let me know if you have this problem,
Are these brighter than the stock fog lights?
Little
@@i1Tesla Good to know, thanks Brian. I'll probably be getting these, keep up the great work!!!
Graft peritineal placement
I installed the right side light only and the tried to test only got the signal to work and the fog and parking doesn't. Do you have any ideas what happened? Thanks
If you are ever in ca I would like you to wrap my model y thanks
Hi is your Model 3 comes with an OEM fog light or no? im wondering if i can use the same method as you did for my Model 3 standard range with no Fog Light….as hansshow and some other review recommend to tap it into the Tail light which is too much work
Where did you get that vinyl strip by the fog lights at? Loops dope!
I am planning to order them but I live in Canada. I see free shipping, will be using your code. Do they provide warranty? How are they treating you so far? Let me know your experience. Normally OEM foglights are automatically switch on and off I believe, can you set the same calibration for these as well? I have M3, I believe they are the same for both. Thanks
I'm not doubting you, but I'm curious as to why you can't get the turn signal from the headlight assembly?
I’m sure you could I found it quick to solder it straight to the wire job done
Hey Brian, So if I turn on fog lights does all lights turn on or just the one like stock? If all lights turn on then then is it just DRLs or is it actual fog light?
I got a question for ya. I’m currently waiting for my model Y performance. I live in colorado and wanted to run the 21’s in the summer, but during the winter I wanted to get smaller wheels and either the Goodyear duratrac tires or the nitto ridge grapplers. Do you think that’s the best option for looks? I love the beefy aggressive look. What do you think those tires would do to performance?
Martian wheels !
Mike I am in Colorado as well, on my M3P during the winter I put on 19inch Pirelli Winter Sottozero's Fantastic winter tire, Martian wheels are super popular as well.
Hi! I'm a subscriber watching your videos in Korea!
This time led mirror covers are newly released, will that wiring work even if I use the side camera wiring? what do you think??
On a 2022 standard rwd can I run the purple to the red to get power?
Yes, purple to red and black to black. Yellow to side repeater. Same on other side but it’s not purple.
Does the fog light on indicator work on the display?
Yes it works perfectly
I lost the icon after installing. The button to turn on and off still exists, and works, but the icon is gone. Womp.
Please create a harness for plug and play
They are now
@@i1Tesla thanks Brian the certainly listen
Purple must be the running light.
I like them except for the fact that the turn signals are sequential. IMO, it looks stupid having one turn signal flash while one is sequential… and they’re just in hard apart. If they were solid flashes like the turn signal in the headlight housing, I’d order a set.
I want to advise my technician to do it like you the way you did it instead of going all the backward causing mess. Can you please confirm that yours running fine? Will it cause any problem to side cameras? Thank you :)
Standard range RWD: purple to red, black to black , yellow to side repeater. SIMPLE…..
Did you do any wire splicing?
I solder mine straight to the wire as that impervious to water insulated the joint job done
the i1Tesla code is not working.
Try it on this link www.hautopart.com/products/model-3-y-front-fog-light-led-sequential-turn-signal?variant=42510686945492&fbclid=IwAR3PXYIUD5d6wmhXpYZ3H19o2snWI4Y29fkPrqzRV96IYV3O7i1tGGzrBMo
🤗😎 BRIAN…COOL 😎💡💯% WE BOTH LOVE ❤️ LIGHTS 😍😍😍
This was certainly a great project they made a big difference to the look and are about 5 times brighter than the original
Very cool!!
The are brilliant excuse the pun they made a big difference to my model 3
I believe the extra purple wire is for the amber that is in the stock foglight on Model 3, they probably use the same harness. th-cam.com/video/RTunN6DSSDA/w-d-xo.html
Thanks Charles that makes perfect sense
This method looks way easier
It was it 6 screws and solder connection and it was done my plug fitted perfectly it was little hard to put the plug into the loom but once in the look brilliant and they 5x brighter
Love it
It looks pretty good - but to me it doesn’t look like what tesla would come up with for the swipe turn feature but still cool. The old fog lights ran on TPS92515 IC’s - an awesome little dc dc converter current source creator!
Canbus
Peritoneal placement cartoon
Great video Brian! Would love to get these, I have the standard range model 3 though :(