I’m literally right there bro but I can’t seem to bypass my damn srs light. Any ideas? I’ve seen people use 2 or 3k ohm resistors but my yellow srs connector has more than 2 pins & it just simply doesn’t work.
Been searching for answers about the horn and nrg hub inner dimensions for 2 days and this is the only thing I have found that answers or gives advice about the momo ring and horn mounting. Big thumbs up 👍🏻 going to go find me that nrg ring.
Good stuff bro, everything was straight forward, easy to see, and the result that came out for me was amazing. Just gained a new sub! Looking forward to more stuff bro.
I’m using the same hub, what have you found? I just ended up keeping the clock spring and running all the wires airbag, horn, cruise control through the hub
That MoMo wheel, is the closet to a DC5R wheel. The stitching and leather is identical. Hence why i should of got one of those over the 2 other wheels i ran in the past.
Great video but how did you bypass the srs light? I’ve seen people do it with 2-3k ohm resistors but my yellow srs conector is not the regular 2 pin, it has more & can’t get it to work. Any help would be amazing.
I really like this same setup and planning on doing the same as you. I do have one question regard the part that NGK made at 11:10. Do that part comes with it or do you have to buy it separately? Thanks in advance
Why didn't you just pull the fuse under the hood? Anyways, that wheel was the one i wish i hag got, over a couple different personal/Nardi wheels i ran, when my rsx was in action. Right now my RSX has no engine, sold the Brembo's ect. Going to be doing a AWD setup in the future. Loves the vids man :-)
Super appreciate the video. I just did this install and you do not need to remove your clock spring if you use the NRG Hub: SRK-131H
I’m literally right there bro but I can’t seem to bypass my damn srs light. Any ideas? I’ve seen people use 2 or 3k ohm resistors but my yellow srs connector has more than 2 pins & it just simply doesn’t work.
I second this, the resistor provided doesn’t fit the srs plug
Thank you so much for your video it helped me and my cousin out with the rsx
The horn works now
Been searching for answers about the horn and nrg hub inner dimensions for 2 days and this is the only thing I have found that answers or gives advice about the momo ring and horn mounting. Big thumbs up 👍🏻 going to go find me that nrg ring.
you have no idea how much your vids have helped me out bro, thank you for your vids🖤
Good stuff bro, everything was straight forward, easy to see, and the result that came out for me was amazing. Just gained a new sub! Looking forward to more stuff bro.
Could you give me the links for everything you got for that setup?
I’m curious as to where the positive terminal gets hooked up too
It comes with a male and female ya need to get rid of the male and change it to female for it to work they didn’t show that
Yo man I use the same boss and hub kit in my dc5 but with a 330mm omp wheel and love the set up
Nice mod on the horn 👌🏼
Where does the Power come from if that upper part is the Ground?
Thank you for the info I just did my rsx
I appreciate watching through your web videos. Thanks!
Can you send link for hub and quick release
@SERGMOTIVEGARAGE thanks man, I needed that! One more thing off the list to fix on a RSX flip I'm doing for a friend 👌
wat size is the airbag bolt
Hey bro, can you buy that O-ring for the horn button separately? If so, care to share the part number? Thank you
If i’m using the SRK-131H (which goes over the clockspring), where do i tuck the orange wire into since there is no brass backing?
I’m using the same hub, what have you found?
I just ended up keeping the clock spring and running all the wires airbag, horn, cruise control through the hub
Like the end result! Keep it up
That MoMo wheel, is the closet to a DC5R wheel. The stitching and leather is identical. Hence why i should of got one of those over the 2 other wheels i ran in the past.
Where did the yellow wire on the quick release go to?
This Honda part # will get you a nice copper piece to activate the horn 35259-SH3-A02
35259-SH3-A02
I’m working on wiring the horn but for some reason it honks when I’m trying to put the steering wheel with the quick release on the wheel
Link to hub and quick release?
I just got one installed today but I need help connecting the horn
Where did you buy the nrg piece that allows you to be able to hold the momo horn in place?
Sermotive where did you get the hub and quick release
What about the airbag light?
What about getting the oem turn signal cancellation work with the NRG/MOMO setup?
if you do it the way i did it in this video the cancellation will still work.
@@SERGMOTIVEGARAGE Thanks! Love your videos! Keep up the hard work.
Running the nrg set up and mine still works
Great tutorial! Does anyone know how to fix the airbag light
I.m.o. the horn button wiring and turning off an SRS light are the most important issues to address.
Great video but how did you bypass the srs light? I’ve seen people do it with 2-3k ohm resistors but my yellow srs conector is not the regular 2 pin, it has more & can’t get it to work. Any help would be amazing.
Yoo get the K tuned race spec shifter💯☝😎 loved the video very helpful
Does the turn signal cancellation still work with this set up?
Can you provide the links please
I really like this same setup and planning on doing the same as you. I do have one question regard the part that NGK made at 11:10. Do that part comes with it or do you have to buy it separately? Thanks in advance
Air bag light?
You have to wire resistors in if you don't want a light.
ive had an airbag light since the day i bought the car lol nothing some electrical tape behind the cluster cant fix 😉
Why didn't you just pull the fuse under the hood? Anyways, that wheel was the one i wish i hag got, over a couple different personal/Nardi wheels i ran, when my rsx was in action. Right now my RSX has no engine, sold the Brembo's ect. Going to be doing a AWD setup in the future. Loves the vids man :-)
Link from where you got eberything
Nices,, great ,,,now i can install my horn
Can you link me eberything you used please
How long did that MOMO steering wheel take to come in? I ordered MOMO stuff, and it took 3 months to finally arrive lol
Tyler Appel order one on carid.com bro, should come in like in a week
Which country do you live in ? If you're in the U.S. of A. , you can order directly from MOMO, amazon, or Swap Shop Racing.
Thanks bro
👍