Rubber-Tire Rail Transit is Weird

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ม.ค. 2025

ความคิดเห็น • 823

  • @Telcom100
    @Telcom100 2 ปีที่แล้ว +782

    France has been fascinated by rubber tired rail cars since the 1930s when they developed the Micheline rubber tired railcar. There are actually a few still running in Madagascar but they are having trouble keeping them in service. The problem - you guessed it - getting tires for them.

    • @KRYMauL
      @KRYMauL 2 ปีที่แล้ว +21

      Shouldn’t Michelin sell them tyres?

    • @KRYMauL
      @KRYMauL 2 ปีที่แล้ว +41

      @Zaydan Naufal Well, I mean every rich country pulled out their old rail lines because they think that freeways are better.

    • @KRYMauL
      @KRYMauL 2 ปีที่แล้ว +2

      @Zaydan Naufal By rich I meant, not incredibly poor. Albania is a developed country isn’t it?

    • @KaiHenningsen
      @KaiHenningsen 2 ปีที่แล้ว +20

      @@KRYMauL Germany? France? Austria? Just to name a few ... For example, the tracks given up in Germany weren't because of Autobahn, but because "oh, these don't make enough money" - in other words, failing to understand network effects. (And many of them are now slowly being returned to service because politics has finally started to prioritize more climate-friendly transport solutions.)

    • @KaiHenningsen
      @KaiHenningsen 2 ปีที่แล้ว +2

      @@KRYMauL From a quick Google: _Albania has a GNI per capita of $5,210. After the USSR's disintegration in the 1990s, Albania shifted from a socialist economy to a capitalist market economy. Although it is the fifth-poorest country in Europe, its economy is continually improving._

  • @Bobrogers99
    @Bobrogers99 2 ปีที่แล้ว +737

    One issue you didn't mention is energy efficiency. Rubber-tired vehicles consume significantly more energy than steel wheels on rails, and as energy costs rise, you may see some of the rubber-tired systems being phased out. It also seems to me that some of the systems with both tires and steel wheels are more expensive to build and more expensive to maintain. Unless the tires provide a vital benefit (such as steep grades), I'd stick with the tried-and-true technology.

    • @neolithictransitrevolution427
      @neolithictransitrevolution427 2 ปีที่แล้ว +21

      While I definitely think most of these tyre alternative modes are unnecessarily expensive, I generally think the energy efficiency point is greatly overblown. Energy costs should be going down as vehicles are electrifies (current European crisis not withstanding), and honestly the real advantage always comes from getting people out of a car.

    • @Bobrogers99
      @Bobrogers99 2 ปีที่แล้ว +46

      @@neolithictransitrevolution427 I agree that rubber-tired public transit is far more efficient than automobiles, but I've read that moving freight by rail is 3 or 4 times more fuel-efficient than by truck. I assume that there is a similar fuel savings when comparing rubber-tired trains to standard rail. While the fuel costs may not be a significant factor right now, it's only going to go up.
      We need to make our cities less car-centric and more walkable/cycleable, and provide more public transit (even if it has to have rubber tires!). We also need to modify zoning, so that homes, shops and workplaces can all be within walking distance of each other.

    • @feynaomi
      @feynaomi 2 ปีที่แล้ว +7

      @@neolithictransitrevolution427 rapid transit is mostly electrified anyway, and if carbon pricing works as planned, that electricity is probably going to get more expensive for a while, and energy is already a major operating cost from what I understand

    • @neolithictransitrevolution427
      @neolithictransitrevolution427 2 ปีที่แล้ว +4

      @@Bobrogers99 Agree on all points, although I think a portion of the Frieght issue is the Giant train engines are far more efficient than the comparatively little truck engines, and average train speeds are actually quite slow compared to highway traffic trucks.
      Also, there is a good chance electrical costs will go down (relative to inflation of course).

    • @neolithictransitrevolution427
      @neolithictransitrevolution427 2 ปีที่แล้ว +2

      @@feynaomi In the medium term the price will go up, but in the long term it will be decreasing as wind/solar farms pay off thier debt and produce effectively free energy, and perhaps with SMRs offering safe and flexible nuclear or Closed Loop Geothermal offering low cost power anywhere.
      Awfully huge chunks of the cost right now are building new transmission and rate subsidies for older versions of technology that is now cost competitive. Wind and Solar are both outbidding Coal plants, which is evidence of the net decrease in the cost of generating electricity.

  • @nigelswafalgan
    @nigelswafalgan 2 ปีที่แล้ว +156

    I can't speak for other cities, but in the case of Lausanne (Switzerland) "Paris-style" rubber-tyred metro was a really great choice. The line literally replaced a urban rack railway in its lower part, and is (correct me if I'm wrong) the steepest rubber-tyred line in the world.
    It has been a huge success since its opening in 2008, constantly outpacing usage predicitions. The construction of a new line has been approved and will use the same rubber-tyred technology (again, because of the slope of the city).

    • @damiensonney9880
      @damiensonney9880 2 ปีที่แล้ว +8

      Lausanne’s M2 metro could totally have used standard steel wheel trams. At the cost of lower accelerations. But the line, as is, is undeniably a success.

    • @Joshua-fi4ji
      @Joshua-fi4ji 2 ปีที่แล้ว +5

      CDMX in Mexico has a mix of tyre and rail systems in its metro. It got me reading into it and the only real benefit I can see, is rubber can handle steeper inclines more effectively.
      There are other minor advantages, but I don't think they justify the use of rubber tyres.
      Being from the UK, I don't think London has any rubber wheels on the line and London is one of the best run metro systems in the world.
      Although I acknowledge London's underground is expensive, was built without any central planning and sometimes has poorly designed platforms.
      Edit: and London is mostly pretty flat.

    • @lzh4950
      @lzh4950 2 ปีที่แล้ว +10

      @@Joshua-fi4ji Was reading that Mexico City is slowly sinking/settling over time, so its metro/subway tracks' profiles will change slightly over time also, & using rubber traction is less likely to lead to derailments as a result compared to steel traction (probably because rubber is a more flexible material)

    • @Joshua-fi4ji
      @Joshua-fi4ji 2 ปีที่แล้ว +1

      @@lzh4950 makes a lot of sense actually. I knew that about CDMX, but never put 1 and 1 together.

    • @antoinegontier482
      @antoinegontier482 2 ปีที่แล้ว +3

      My dad actually worked on the prolongation of one of the lausanne metro lines. the slope is indeed incredible !

  • @andrewclarkson3401
    @andrewclarkson3401 2 ปีที่แล้ว +218

    Hi Reece, this video is much better than the one it replaced! My limited experiece with rubber tired trains, Montreal, is that the ride is equally comfortable and loud to steel-wheeled metros. Incidentally, I have only heard the screeching on the Toronto subway in the sharp curves into and out of Union. Thirty years ago, the screeching used to happen many more places in the system, so it is much improved.

    • @Freshbott2
      @Freshbott2 2 ปีที่แล้ว +10

      What caused this? My only guess is that old trains typically used through-axels and that new ones don’t but one never seen anything to support it.

    • @RMTransit
      @RMTransit  2 ปีที่แล้ว +18

      So great to hear that! It’s my goal!

    • @andrewclarkson3401
      @andrewclarkson3401 2 ปีที่แล้ว +5

      @@Freshbott2 I am not sure exactly what changed. I think I remember hearing that the wheel profile was slightly different on newer train models, but I am not an expert on train design. (Maybe someone who is could comment.) I am just thankful that my trips between Old Mill and Jane are not interrupted by soul-piercing screams from the wheels as they were when I was a teenager.

    • @KaiHenningsen
      @KaiHenningsen 2 ปีที่แล้ว +12

      @@andrewclarkson3401 I have no idea about metro/tram systems (even less specific ones), but I do know that at least DB actually uses automatic lubrication (at the rail) on sharp curves, to reduce the noise as well as the abrasion.

    • @tonys2957
      @tonys2957 2 ปีที่แล้ว +11

      @@Freshbott2 Couple of big influencers:
      1) welded continuous rail is infinitely easier on trucks/bogies
      2) developments in flange lubrication have come a long way

  • @Eric_Hunt194
    @Eric_Hunt194 2 ปีที่แล้ว +104

    A couple of minor additional points:
    Standard trams aren't too bad at hill climbing. Sheffield (UK), Prague (CZ), and especially Lisbon (PT) systems all have steeply-graded sections that regular trams cope fine with. Obviously if you have a really steep hill you might need rubber tyres, but only really at the extreme end of the scale.
    Secondly, one of my least favourite aspects of rubber-tyred metros is the smell of burnt rubber, and the tiny particles of rubber dust which passengers can't help but breathe in. I'd much rather endure flange-squeal than the smell of burnt rubber.

    • @Twittler1
      @Twittler1 2 ปีที่แล้ว +3

      Those old four wheeled Oporto and Lisbon trams are amazing - how they get up those really curvy inclines is fabulous, not to mention coming down again! Line 28 in Lisbon!
      It’s been a few years, but I did notice that the old Lisbon and Oporto trams had had their running gear updated. This was after most of the older suburban trains on the London Underground Metropolitan Line dating from the 50s and 60s had been withdrawn. The new four wheel sets and sub-chassis for the Portuguese trams were each one power bogie/truck from the withdrawn London Underground trains, reconditioned. Nice bit of recycling!

    • @highspeedrailenjoyer1045
      @highspeedrailenjoyer1045 2 ปีที่แล้ว +1

      Lausanne, a very hilly city in Switzerland, replaced their dense tram network with buses and trollybuses.

    • @mattsmocs3281
      @mattsmocs3281 2 ปีที่แล้ว +1

      In my home area, there was a trolley line with near 20 percent grades in locations. The 4 motor cars had no issue no matter the weather getting up and down the line.

    • @michaelmiller641
      @michaelmiller641 2 ปีที่แล้ว

      And dog kennel hill in london

    • @t0biascze644
      @t0biascze644 2 ปีที่แล้ว +1

      where in prague is there steep tram line?

  • @buhboni7324
    @buhboni7324 2 ปีที่แล้ว +27

    I work in a light rail control room in Canada and you've got a lot more knowledge than a lot of the people I've worked with. You could make good money as a project consultant, especially with all the new projects opening in Toronto

    • @zacharyabelson8196
      @zacharyabelson8196 ปีที่แล้ว +6

      If you google him you'll find he is a consultant and this is just a side thing

  • @adamevans1989
    @adamevans1989 2 ปีที่แล้ว +397

    Rubber tyred metros are a mild health hazard by virtue of the amount of the PM 2.5 they spew out. Also the underground rubber tyred Paris metro line stations smell horrendous because of the tyres.

    • @dustojnikhummer
      @dustojnikhummer 2 ปีที่แล้ว +52

      Don't rubber tires also require much more maintenance?

    • @BraxtonMeyer
      @BraxtonMeyer 2 ปีที่แล้ว +6

      that's not how anyh of that is spelled.

    • @MuddyRavine
      @MuddyRavine 2 ปีที่แล้ว +85

      ​@@BraxtonMeyer If you are talking about tire vs tyre, it depends on where in the world you're coming from. On a world wide scale either is acceptable.

    • @Twittler1
      @Twittler1 2 ปีที่แล้ว +12

      A lot of that is because the wheel sets on the bogies don’t steer, at least on older versions. Both axles are rigid, as on a steel rail system, so on curves the ‘road tyres’ scrub around curves, much as the rear tyres on a non-steering twin rear axle truck do. Must make them wear and release their toxins much faster.

    • @RMTransit
      @RMTransit  2 ปีที่แล้ว +99

      This is interesting because PM2.5 pollution is actually much better in the Montreal Metro when compared to the Toronto subway, even though Montreals system is entirely underground and quite air sealed!

  • @alexanderlammers6980
    @alexanderlammers6980 2 ปีที่แล้ว +154

    I think that some gadgetbahn systems and respective technology (translohr, rubber-tired metro) may have a usage where classical systems fail or have major issues. Probably one of these cases are cities with a difficult topography where "steel" trains would need long tunnels and shallow gradients to change height, while rubber tires can use much more steep inclines, but without the need to build a funicular style system.

    • @gondolagripes1674
      @gondolagripes1674 2 ปีที่แล้ว +6

      This is what the Morgantown PRT does to allow very tight turns and steep grade climbs.

    • @craighiggs3029
      @craighiggs3029 2 ปีที่แล้ว +21

      @@thomaserickson5737 I belive because few cites are built on steep slopes. They are widely used in Switzerland for commuter rail though.

    • @bahnspotterEU
      @bahnspotterEU 2 ปีที่แล้ว +14

      @@thomaserickson5737 Rack railways are incredibly slow, I think rarely faster than 30 kph, which is far too low for any metro-style service.

    • @jorgeandresortigozaulloa6088
      @jorgeandresortigozaulloa6088 2 ปีที่แล้ว +6

      You're right. One successful case is Medellín's tramway, only the rubber tires could climb that steep roads.

    • @RMTransit
      @RMTransit  2 ปีที่แล้ว +16

      Yep that’s my thinking, tunnelling is not cheap!

  • @StrassenbahnBen
    @StrassenbahnBen 2 ปีที่แล้ว +55

    For the Medellin-Tram: A regular tram would have been possible. But, coincidentally, the system was built with a loan given from the French government. That was after representatives of French companies visited the country. You know, things just happen sometimes. :)

    • @sonicboy678
      @sonicboy678 2 ปีที่แล้ว +1

      That tracks, unlike Translohr...

    • @alfrredd
      @alfrredd 2 ปีที่แล้ว +5

      Stop giving transit projects to the french.

    • @AlbertoGomez-oi5ou
      @AlbertoGomez-oi5ou 2 ปีที่แล้ว

      Same thing in Cuenca tram tho

    • @walideg5304
      @walideg5304 2 ปีที่แล้ว +3

      @@alfrredd THey have the best engineers of the world, best transit technologies (Alstom high speed, or Citadis, VAL technology bought by Siemens), solid consulting companies for the studying like Systra and excellent construction engineering companies like Vinci, Bouygues, Eiffage, all of them have build Trams, Metro, HSL.

    • @kekessalman
      @kekessalman ปีที่แล้ว +1

      I watched the Medellin Tram videos. That route with those slopes and curves, mixing with traffic and sudden stops etc. could NOT be possible with steel wheel regular trams. They would have to make bridges, tunnels and knock down a lot of building for a regular tram.

  • @chongjunxiang3002
    @chongjunxiang3002 2 ปีที่แล้ว +16

    Speaks about Taipei Wenhu Line with that rubber tyre, I still recall former mayor of Taipei Chen Shui-bian quote:
    馬特拉不拉 我們自己拉 (If Matra don't want to push our train, we will push the train by ourself)
    After the construction of Wenhu Line, the rolling stock provider MATRA suddenly terminate their contract to maintain them, surprised the Metro Taipei and government because they need to assembly their own crack team fast with homegrown component. Luckily Taiwan's industry prowess allow them to still let it run until today.

  • @Luke_Starkenburg
    @Luke_Starkenburg 2 ปีที่แล้ว +5

    Nice video! I like how you explain some technical aspects of the technology and why it was chosen, and still make your videos easily consumable by most people! Rubber tires usually cause a more bumpy, slower ride than steel wheels. I’m still hoping that urban maglev systems with speeds between 100-160kph get built, like the Linimo in Nagoya Japan and various Chinese urban maglevs. One major benefit to grade separated rail systems is that it can’t hit cars, bikes, pedestrians, etc.

  • @cedricklyon
    @cedricklyon 2 ปีที่แล้ว +7

    The Nancy TVR will soon be replaced by 24m long trolleybusses, with "In Motion Charging" onboard batteries by HESS.
    Paris choice to build so many different and non-interoperable LTRs is just incredible ! (TVR, 2,45m/2,65 wide trams, 750VDC/1500VDC Overhead lines...)

  • @fewchan
    @fewchan 2 ปีที่แล้ว +88

    I think I have to mention that iron rail is "quite heavy". In my country, Japan, AGT (Automated Guideway Transitmit) ≈ Mitsubishi Crystal Mover is often used in bay area where the ground is not firm enough.

    • @Sacto1654
      @Sacto1654 2 ปีที่แล้ว +8

      At least in Japan, automated guideways are at least well-implemented (at least in the Tokyo area). But some of these "gadgetbahn" systems are mechanical nightmares not worth building in the long run.

    • @deptusmechanikus7362
      @deptusmechanikus7362 2 ปีที่แล้ว +3

      Why not simply use a trolleybus then?

    • @thecooletompie
      @thecooletompie 2 ปีที่แล้ว +4

      @@deptusmechanikus7362 Crystal mover technology can operate without a driver, the yurikamome line in Tokyo is driverless and has platform screen doors.

    • @RMTransit
      @RMTransit  2 ปีที่แล้ว +16

      I’m skeptical that this is a good reason these days, lots of traditional rail is used in such areas even in Japan!

    • @trainsandmore2319
      @trainsandmore2319 2 ปีที่แล้ว +2

      Not just Tokyo, but you also have Kobe Portliner as well.

  • @Federico_Cahis
    @Federico_Cahis 2 ปีที่แล้ว +10

    My favourite transit choice anywhere is the rubber-tyred NS-93 on line 1 in Santiago. Huge windows, spacious, wonderful sound, and amazing acceleration and deceleration. Combined with the extremely short stops, excellent headways.

    • @thepedrothethethe6151
      @thepedrothethethe6151 2 ปีที่แล้ว +2

      The only problem I have with those is seat distribution. I don't want to talk to strangers on my way to university!!

    • @Federico_Cahis
      @Federico_Cahis 2 ปีที่แล้ว

      @@thepedrothethethe6151 Good point. I just never sit so hadn't thought of that.

    • @unlapras9365
      @unlapras9365 2 ปีที่แล้ว

      NS-93 is based on Paris's MP89. TL 8/8 from Lausanne also looks very similar !

  • @jb3____
    @jb3____ 2 ปีที่แล้ว +9

    There is a similar system to these where I go to university. It's called the Morgantown PRT. They are self driving buses that run on a grade separated guide-way. Each car carries 15 passengers (if you overload them they scream at you). The system was built in the 70s and it has garnered a reputation for unreliability in recent years. It actually broke down a few hours ago; right as I was about to get on. It's an interesting system, and is the largest of its kind. It may be worth looking in to for a video sometime.

  • @alphawinnergx9127
    @alphawinnergx9127 16 วันที่ผ่านมา

    Thanks for mentionning Caen tramway !
    This is my home town, where I grew up with rubber tire trams until these were swapped for much better Alstom steel rail trams. This overhaul was also accompanied by an extension of our network. Two of the already existing northern terminal stations were slightly changed, and two track extensions were built, with one of them giving birth to a new line. Further extensions are also planned to serve the west side of the city, as current tram network is mostly a north-south axis that shares one common segment throughout downtown and branches out in the suburbs.

  • @richardbloemenkamp8532
    @richardbloemenkamp8532 2 ปีที่แล้ว +6

    I'm using the Translohr T6 line south of Paris every day and I'm very happy with it. In addition it has a steep sections which it manages really comfortably, not bumpy and not at all noisy. Also it looks very good and is clean. I think it helped the neighborhoods around the line to significantly increase in value. I would say it is a great success.

    • @sachatrin2981
      @sachatrin2981 ปีที่แล้ว

      I'm happy too. Frequency is great. Just hope it won't diseappear and turn into a bus when the technology gets to end of life.

  • @gregderise9969
    @gregderise9969 2 ปีที่แล้ว +3

    Interesting video and interesting first comment below this one. I always enjoy your good transit videos. I never fail to learn something. I find lots of worthwhile comments by your viewers also which adds to the enjoyment and learning experience.

  • @leroilapin8845
    @leroilapin8845 2 ปีที่แล้ว +17

    You talk about the tram in Clermont Ferrand and for that thank you. One big thing I like about rubber tired trains, especially in Paris is that they are much more quiet than standard systems (this is one of the reason why the line 2 & 6 have been equipped with it) Also it helps with large hill. As a user of the Paris metro everyday to go to work I prefer taking the line 14 over the line 7 (which is as loud as it can possibily be, the MF77 is an absolute horror) even if it means having 5 to 10 minutes of travel in addition. If you ever go to Paris you might be interested in "Les journees du patrimoines" where the RATP allow us, with someone from the RATP, to go on the track of some unused station like Haxo where you will be able both rubber and non rubber track. This was the place where they first tried rubber tired track.
    On another hand one thing I like about how it was implemented in Paris is that the track are compatible with normal trains meaning that if they ever want to swap the train they can! On some occasion you will even find some metro from line 4 on non rubber tired track in order to go to maintenance.

    • @potdefrite7632
      @potdefrite7632 2 ปีที่แล้ว

      la 2 c'est du materiel fer (MF01) il me semble

    • @DrumSlayer
      @DrumSlayer 2 ปีที่แล้ว

      @@potdefrite7632 yep, line 2 are not rubber. Paris metro with rubber systems are 1, 4, 6, 11 & 14

  • @EasternSeaboardProductions
    @EasternSeaboardProductions 2 ปีที่แล้ว +16

    I would love if you could discuss New Jersey Transit Rail Operations, its a fairly large system that should be covered, if you make one I think it will help more people understand our unique system.

  • @HoneyBeeNarcissist
    @HoneyBeeNarcissist ปีที่แล้ว +2

    The Yurikamome in Tokyo actually really benefits from the rubber tire rail configuration as it allows a smaller footprint across the small islands of Odaiba, Aomi and Ariake district. It also lets the smaller trains move faster and stop quicker, which makes the trip through the rather winding tracks a lot better.

  • @fernbedek6302
    @fernbedek6302 2 ปีที่แล้ว +26

    I do think there’s benefits to having some non-standard transit technology around. Sometimes a later development only made possible by the fact people are still holding on to an odd system helps them become far more competitive. For instance, there were very valid reasons behind cities choosing buses over trams in the mid 20th century but they’re coming back because some cities held on to a seemingly inferior technology and figured out how to make them better.
    (Also, I will take the roar of rubber over the squeal of metal on metal *any* day.)

    • @fernbedek6302
      @fernbedek6302 2 ปีที่แล้ว

      Some systems are nonsense that should never be built though. Just to be clear.

  • @AaronSmith-sx4ez
    @AaronSmith-sx4ez 2 ปีที่แล้ว +15

    The difference in cornering for rubber/steel tires though is significant and it's not just noise. Rubber can take very tight corners and faster. The core issue with steel wheels is they don't have a differential and have to rely on banking which requires very precise tolerances to work well. With any vehicle going over any road/track there will be wear. The question is do you want the track wearing out or the wheels? I would argue it's better to have the wheels wear out. Steel wheels will actually erode not only the rails, but the sleepers and fish plates. This creates a safety hazard or forces trains to travel artificially slow because the rails are in bad condition. If you hear noise on the track then that is either the rails or wheels being stressed or being degraded. racks that support rubber tires usually don't wear out and don't require expensive/time-consuming repairs. The real problem however with rubber tires though is track switching...it is difficult, time-consuming, and expensive to have a switching system for rubber tires, while steel wheels can switch tracks very easily.

    • @Twittler1
      @Twittler1 2 ปีที่แล้ว +2

      On the older Parisian lines, the rubber tyred wheels are non-steering AND on solid axles. So they scrub around curves, AND rotate at the same speed as each other. Wear and toxin release must be horrendous.

    • @AaronSmith-sx4ez
      @AaronSmith-sx4ez 2 ปีที่แล้ว +3

      @@Twittler1 I agree that is bad. Honestly all metros should have differentials...they are quieter and reduce wear on tracks/wheels. Monorails actually have a decent solution in that they have one set of wheels for up/down and one set for laterally holding the vehicle to the track.

    • @billyswong
      @billyswong 2 ปีที่แล้ว

      But differential doesn't seem rubber tyre exclusive. I don't see any inherent issue that prevent it from being put on a steel wheel tram.

    • @Twittler1
      @Twittler1 2 ปีที่แล้ว +2

      @@billyswong Added expense and weight for no real benefit. And another potential failure point; thick, heavy solid steel axles rarely break down. Split them to put a differential in - you’ve now designed in a weak point. The natural differential action of cone shaped wheel profiles is sufficient for all but the tightest curves.
      Some older trams/streetcars in North America (the PMT(?) types) did have Pullman bogies/trucks, the powered ones of which did have differentials. I rode them in Boston in the 60s, but whether they helped is another matter. Wheel squeal on tighter bends was as loud as ever.
      Modern low floor trams get round this by not having axles at all - each wheel is independent of all the others and independently suspended too. But they still squeal. It’s the nature of the beast (flanged steel wheels, steel rails).

    • @LeGrandJuju49
      @LeGrandJuju49 2 ปีที่แล้ว +3

      @@Twittler1 rubber tired Paris metro trains have differentials since the beginning, in 1951... And I'm sure of that because I've got the plans and have seen them...
      As to why steel trains don't have differentials is due to the conical shape of the wheels doing this job. The exact profile of the rolling table determines the dynamic behaviour and is a great point where innovative shapes reduce screeching and wheel hunting. They are great at that in Asia iirc

  • @bobji8806
    @bobji8806 2 ปีที่แล้ว +2

    I recently moved to Adelaide from Melbourne Australia, in Adelaide they have something called the O-Bahn, it’s a bus most of the time but they have specific tracks at specific locations to reduce travel time and traffic congestions. I think that is pretty cool

    • @verygoodbrother
      @verygoodbrother 2 ปีที่แล้ว +1

      i believe this channel has covered that system

  • @ashleymalamute
    @ashleymalamute 8 หลายเดือนก่อน +2

    The lengths these people go to to not build a steel wheeled train or a tram is astonishing.

  • @nuabioof83
    @nuabioof83 2 ปีที่แล้ว +17

    I think there is a big gap between those technologies, the translohr is a pain to use, it's shaky, often delayed, has frequent issues and so on. On the other hand, the VAL is such a pleasure on the daily, it sails smooth (unlike the neoval which apparently is quite shaky), is quite silent, and has 1 min headways. And as a user waiting 1 min instead of 8/9min can shorten your trip by a LOT.

    • @TheTanitrovitz
      @TheTanitrovitz หลายเดือนก่อน

      In Toulouse in retrospect the VAL was the best possible option : the city was too small at the time to afford a wide metro. VAL provided a cheap and efficient solution, and it still runs like clockwork to this day. Better to have a larger VAL network than a smallish regular-sized network because your city couldn't afford to build more than 20 stations

  • @铜羅衛門
    @铜羅衛門 2 ปีที่แล้ว +10

    The trains on Montreal Metro are LOUD when they depart from a station! Some say it’s the traction motor(I can’t find the source), but I really enjoyed it when I visited Montreal a few months back. Also I believe Montreal Metro has the highest capacity rubber tire metro trains out there. It’s a system that adds personality to the city, I do wish it was more expansive!

    • @xreel1591
      @xreel1591 2 ปีที่แล้ว

      If you are talking about the sort of melody the older trains makes when they depart then yes it comes from the motors. They also decided to use that sound for the door closing chimes.

    • @mrvwbug4423
      @mrvwbug4423 ปีที่แล้ว +1

      Loud traction motor startups is endemic to AC traction motors made before about the last decade, most common to trains from the 1990s-2009 or so. Prior to IGBT technology the gating transistors that AC traction motors needed to modulate their power were quite noisy. This sound is most notable on the 1993 stock London underground trains (the infamous sound of the Jubilee Line), the high pitched REEEEEEEEEEEEEE that LIRR M7 trains make at 6mph and the musical scale startup sound of the "singing" Siemens Taurus locomotives (most commonly used by OBB in Austria, go figure). The musical scale gating transistors of the Siemens Taurus was a deliberate easter egg on that locomotive.

  • @paulgracey4697
    @paulgracey4697 2 ปีที่แล้ว +6

    I first experienced rubber tired Metro in Montreal when visiting Expo 67 World's Fair. As I recall, the advantage provided, was the slope downward leaving a station that helped accelerate the trains and the next upslope which saved on brakes. This also let the stations not be so deep as steel wheeled subways tend to be. Paris did not have that feature on the ones I rode there.

    • @InTeCredo
      @InTeCredo 2 ปีที่แล้ว

      Nuremberg subway system was built in a way that the tunnels between two stations dip down a several metres in the middle. This helps with using less energy for acceleration and deceleration.

    • @lzh4950
      @lzh4950 2 ปีที่แล้ว

      Singapore has such a design also though it also means that if you want to lengthen the platforms, the ends will no longer be level, which would complicate accessibility

  • @juulvlog
    @juulvlog 2 ปีที่แล้ว +1

    Oui oui, Nancy. Been there on interrail, didn’t know this contraption existed, rode it (single fare was €1,30) and loved it

  • @davidnovakreadspoetry
    @davidnovakreadspoetry ปีที่แล้ว

    I’ve long been wanting to hear an explanation like this. Thanks!

  • @TheNewGreenIsBlue
    @TheNewGreenIsBlue 2 ปีที่แล้ว +2

    I remember when Vancouver was considering GLT as a potential technology for the Evergreen Line extension. THANKFULLY cooler heads prevailed and they stuck with the SkyTrain technology that was already being used.

  • @Ice_Karma
    @Ice_Karma 2 ปีที่แล้ว +2

    13:05 "And so the idea that if it snows a bit your metro might not work" -- As a resident of Vancouver, I'm entirely too familiar with that.

  • @Tus3B14
    @Tus3B14 2 ปีที่แล้ว +2

    Didn't expect to hear about my home town ! CAEN
    That's the one who replace the whole tram after only a decade !

  • @FloriOnRails
    @FloriOnRails 2 ปีที่แล้ว +2

    Judging on the title and thumbnail I first thought that you are making a case against trolleybuses. But luckily I was wrong.

  • @dez7800
    @dez7800 2 ปีที่แล้ว +22

    Ok but the noise a pretty obvious win. I take the Montreal metro every day and I've experienced conventional rail metro in New York a bunch of times and the small roaring is much nicer than the metal friction noise imo.. It feels so much quieter.

    • @RMTransit
      @RMTransit  2 ปีที่แล้ว +7

      Yeah but New York is a very old and not always wonderfully maintained system!

    • @dez7800
      @dez7800 2 ปีที่แล้ว +1

      @@RMTransit Sure is an old metro.. Thanks, nice to know!

  • @MrSaemichlaus
    @MrSaemichlaus 2 ปีที่แล้ว +1

    Rubber tired trams have a counterpart: a traditional bus running on concrete guide tracks for part of its route. I'm thinking of the O-Bahn guided busway in Adelaide, South Australia. Those are normal buses that run on normal roads for a lot of their route, but then run on concrete tracks to cover larger distances with negligible demand for stops along the way. I've seen them with double bendy bus configuration so they aren't quite as long as your average tram, but then a tram doesn't have to take very tight corners.

  • @WhiskyCanuck
    @WhiskyCanuck 2 ปีที่แล้ว +9

    What timing. Just the other day I was in the Montreal Metro and wondering if people would consider it a gadgetbahn.

    • @WILD4X4D
      @WILD4X4D 2 ปีที่แล้ว

      I just consider it more meddling from a bunch of France wannabes. Mayor Jean Drapeau, should have had his butt kicked for it. (Also lived in this province my whole life)

    • @carlosdgutierrez6570
      @carlosdgutierrez6570 หลายเดือนก่อน

      Mexico city metro is twice as big, the second largest metro system in the continent after New York's and with a similar ridership and it mostly uses rubber-tired trains since the 1960s.
      Would you consider it a gadgetbahn?

  • @enricomonti156
    @enricomonti156 ปีที่แล้ว

    In my hometown, Bologna, there has been an attempt to an optic guided trolleybus called Civis that eventually never entered in service (as local bus drivers considered it unsafe and it failed safety checks) and it had to be readapted to be used by new conventional trolleybuses.
    The vehicles involved were Irisbus Civis trolleybuses, which then were replaced for free by Irisbus (as compensation) by the Irisbus Crealis Neo.
    And anyway, in Italy there are two rubber-tyred trams using Translohr tracks, in Padua and Mestre, with one line in the latter system extending to Venice.
    As for the Nancy system, it was retired last month

  • @maanvis81
    @maanvis81 2 ปีที่แล้ว +1

    Those rubber tire metro systems in Paris,the most notable thing is that all the stations smell like rubber there :)

  • @simonalexandercritchley439
    @simonalexandercritchley439 2 ปีที่แล้ว

    Nice Crocodile/Krokodil model behind you. Another way to provide a smooth ride was the PCC cars used in New York and other U.S cities in the 1950s. They had air suspension and air conditioning and were the most comfortable way to travel until displaced by the automobile.PCC cars had all the benefits of rubber tyred vehicles with none of the drawbacks and ran on regular tram tracks with high efficiency.

  • @balaha2143
    @balaha2143 2 ปีที่แล้ว +56

    Brisbane’s new “metro” is literally a long bus with rubber wheels and that makes me mad

    • @RMTransit
      @RMTransit  2 ปีที่แล้ว +21

      It’s just a pretty standard bus! So it’s fine!

    • @Justin-xk7yj
      @Justin-xk7yj 2 ปีที่แล้ว +5

      It boggles my mind why they don't follow Sydney's example and build a full automated metro system instead.

    • @nelsondawson9706
      @nelsondawson9706 2 ปีที่แล้ว +6

      it's Just a really long articulated bus to me and they were designed for use on the pre-built busways

    • @sanitygone-l9y
      @sanitygone-l9y 2 ปีที่แล้ว +6

      it doesn’t have a lot of the disadvantages that RMTransit mentioned here because it’s literally just a fancy bus. There’s no guideways or rails or overhead lines, just wheels on tarmac.

    • @frehesh.4386
      @frehesh.4386 2 ปีที่แล้ว

      @@Justin-xk7yj it'll be so hot

  • @wanaan
    @wanaan 2 ปีที่แล้ว +1

    Also got one in Bangkok. Bangkok is most varied transit city in the world, we have subway, monorail, trains, elevated trains and also rubber wheeled train. Right next to each other.
    Heck, our train system is so crazy, you have to get off the train, buy a new ticket, then get in again if you go over a certain part of the city.

  • @Morall332
    @Morall332 2 ปีที่แล้ว +1

    Hey, you talked about my city!
    I live in Caen, Normandy, the city that replaced tyred trams with traditional ones (at 7:21).
    I witnessed the old trams (which were small and crowded, such that on chilly mornings, a lot of condensation formed on the windows), the transition period (lots and lots of road works, and sometimes the old trams hat to use their motor engines on sone sections, since the power lines had been removed) and the advent of the new tram!

  • @MarioFanGamer659
    @MarioFanGamer659 2 ปีที่แล้ว +14

    I was actually surprised you didn't talk Autonomous Rail Rapid Transit (sometimes called "trackles tram" such as in an article by The Conversation - and that one is kind of a joke, really) which takes the Translor idea but with less infrastructure i.e. the "rails" is just paint on the street and the vehicles are battery only, no overhead wires.

    • @chongjunxiang3002
      @chongjunxiang3002 2 ปีที่แล้ว +4

      I think ART is still too new to be relevant atm, no cities actually use them yet except experiment units.

    • @KRYMauL
      @KRYMauL 2 ปีที่แล้ว +1

      Isn’t that just a trolley bus?

    • @MarioFanGamer659
      @MarioFanGamer659 2 ปีที่แล้ว +5

      @@KRYMauL While that's a common alternative name to trolleybuses (though I put them to the same category as normal buses in the same way how I call diesel trains diesel trains and not tracked buses), the vehicles of ARRT are battery buses and aren't connected by overhead wires.

    • @Freshbott2
      @Freshbott2 2 ปีที่แล้ว +1

      That’s actually fantastic. Without using a steel guide and pantograph it can avoid the infrastructure cost and it can be varied very slightly to avoid wear. It can go up hill and have better braking. But it can all offer better amenity and higher capacity than BRT. “Paint on the street” isn’t an insult, it’s exactly how we designate bus lanes and stop cars from parking in public space for basically nothing. It’s treated as a joke cause “real trams” already exist but the idea actually achieves things trams don’t. Appealing to the status quo didn’t get horses very far when cars came around. I think these will be very common one day. While people discuss whether they can be a thing car companies are making electric vehicles and mining companies run guided trucks. They didn’t umm and ahh about it asking for permission.

    • @RMTransit
      @RMTransit  2 ปีที่แล้ว +9

      They are really just another new bus design that has lots of issues that make me skeptical

  • @marktownend8065
    @marktownend8065 2 ปีที่แล้ว +2

    Great analysis!

    • @RMTransit
      @RMTransit  2 ปีที่แล้ว

      Thanks Mark!

  • @paulinbrooklyn
    @paulinbrooklyn 2 ปีที่แล้ว +9

    As a native of Boston who has lived in NYC since the 1980s (ie, lifelong familiarity with steel on steel subway and trackless trollies), I am an unabashed fan of the two rubber tire subway systems I’ve used extensively (Paris and Montreal). They provide a much more quiet (or at least pleasing to the ear) riding and waiting experience and in my opinion a much more comfortable ride whether seated or standing.
    Furthermore, I believe you stated it exactly opposite (in my subjective opinion) when you stated you don’t significantly prefer the ride in Toronto’s conventional system to Montreal’s rubber tire system, though YMMV and obviously does.

  • @hebijirik
    @hebijirik 2 ปีที่แล้ว +7

    Good video and I cannot help but add something.
    I don't think Translohr is better than a tram (and not just because the hybrid electric-pneumatic door system is unpleasant to test after we assemble it in our factory). However to be completely fair to it there are two advantages of it that I have not seen mentioned and as you said in some niche cases they can contribute to this system winning.
    1. the noise - despite the guide rail the one I have seen in person in Paris was singificantly quieter in the street than a tram. Modern trams make the difference smaller and smaller with clever wheel designs but the only time I have seen a translohr running the lack of expected noise was the first thing I noticed and after I wondered why that is I finally saw that it is a Translohr and not a tram. So I guess in some cases this could be a factor when deciding what to build.
    2. narrow spaces and two-wheelers - one thing I absolutely hate about trams is that whenever there is the need for the tram to go to the side of the road in a tram stop or the tram stop is extended towards the rails and there is no cycle path behind the tram stop away from the rails all cyclists passing throuh face a choice of two bad options - ride the narrow space between the high tram stop curb and the rail (and pray no stupid driver will start overtaking you in the remaining space where they fit with whole 5cm to spare) or you can cross the nearer rail at a horribly sharp angle, ride in between the rails through the tram stop and then cross back to the side again. If the rails are a bit wet and/or you are not capable of jumping with your bike you will crash and possibly get run over by anything following behind you. I have seen motorbikes crash in these tram stops too. Translohr will have something like 1.2m between the curb and the guide rail negating the need to go over the rail. So if I had to mix something like a tram line with a lot of trafic on two wheels in narrow streets Translohr would get one plus point in the contest for this.
    So if the line is in a sunny dry city, passes through a flat center where tons of people cycle rather than walk and runs into steep hills on both ends where rich and powerful people living there demand it to be quiet Translohr just migh fit. It will be no cheaper to operate like you said but it could fit the need of such a transit line - climb hills, less noise and fewer raild in the road.

  • @mrcead
    @mrcead ปีที่แล้ว

    Love the Crocodile model in the background❤

  • @catenaris
    @catenaris 2 ปีที่แล้ว

    I found this video much more balanced than the previous ones. I enjoyed listening to the argumentation. I somehow like this type of "playing advocate for the devil" argumentation, I thinl in this case it made especially a lot of sense. Great job!

  • @A350flyernyc
    @A350flyernyc 2 ปีที่แล้ว +3

    I rode the Montreal Metro recently, and I really enjoyed it. I felt the ride quality was very smooth, smoother than other metros I’ve been on (tho I’ll admit I’m from the U.S., where track quality is quite poor), and had no issues with the noise. It’s quite a cool and easy to use system, and I really think it’s one of my favorite Metros. I do agree however that steel wheels could probably do the job just as well, but I had no problem with the tires.

    • @texasabbott
      @texasabbott 2 ปีที่แล้ว +1

      Montreal has a deeply optimized system when it comes to speed, efficiency and capacity. Transmission of vibration to neighboring buildings is something that Montreal wanted to avoid. Montreal's Metro takes full advantage of rubber tire configuration to build high-performance trains that can accelerate quickly, negotiate tight curves and climb slopes of 6.5%, almost always at 45 mph. Steel wheeled trains would cripple performance as they are generally limited to 4% slopes and speed restrictions through tight curves.

  • @jesioterofficial527
    @jesioterofficial527 2 ปีที่แล้ว +1

    Love your content!
    Please make a video on Warsaw trams and constantly changing metro plans.
    Thank you in advance!

  • @tramlink8544
    @tramlink8544 2 ปีที่แล้ว

    as someone who works on them, loving the Krokodil in the background :)

  • @SteveH-TN
    @SteveH-TN 2 ปีที่แล้ว

    Thanks for sharing this video and information

  • @Aprill264
    @Aprill264 2 ปีที่แล้ว +4

    I rode the Translohr system in Clermont-Ferrand this summer. It was one of the most uncomfortable journeys I've had on a tram.

    • @aldoso2
      @aldoso2 2 ปีที่แล้ว

      I know very well this system in Mestre and in Padua; the interior is narrower then a traditional tram (the ancient P.W.s in Milan are a salon in comparison), but in these cities there are some particular bridges, where ordinary tracks could be problematics for the slopes.

  • @marutherailways
    @marutherailways 2 ปีที่แล้ว +1

    In Japan, rubber tyred transit systems have been introduced in 3 types, subway, monorail and auto guided transit (AGT). Only Sapporo City adopts a full scale rubber tyred transit system for its subway lines similar to those in Paris. Other monorails and AGTs are adopted by a large number of business operators as a medium-capacity rail transport system. A rubber tyred tram system has not adopted even a trading company marketed Translohr in 2000s but no adoption result was made.

    • @RMTransit
      @RMTransit  2 ปีที่แล้ว +2

      Yep! It’s mostly crystal movers and monorail

  • @henryenib
    @henryenib 2 ปีที่แล้ว +6

    The fact that rubber tires makes less vibrations is important for metro like Paris or Lyon when the lines are not deep. Vibrations spread to the nearby buildings, and living nearby a metro line, I am pretty happy with the rubber tires.

    • @neolithictransitrevolution427
      @neolithictransitrevolution427 2 ปีที่แล้ว +6

      Interesting, it may be a less expensive way to deal with NIMBYs than boring. This idea deserves some digging into.

    • @MarioFanGamer659
      @MarioFanGamer659 2 ปีที่แล้ว

      @@neolithictransitrevolution427 Your comment certainly deserves some form of a punishment.
      Sorry...

  • @AlexPotvin
    @AlexPotvin 2 ปีที่แล้ว +1

    If it wasn't for the rolling noise, the Montreal Metro is still the most comfortable system in Canada.
    No squeal and the softest stopping (the wooden brakes help a lot with that). Floatiness is better that jitters.
    Fight me.
    Also Skytrain is barely functional on snow days and the reasoning for no surface lines for Montreal's metro is to keep everything tip-top. They say mixed-outdoors system greatly reduces the lifespans of railcars and whatnot. Given that until the Azur trains we were still rolling with stuff from the 60s and 70s, I'd be kinda inclined to believe that. Contrast that with the lifespan of MK1 cars on SRT or Skytrain.

  • @benqurayza7872
    @benqurayza7872 2 ปีที่แล้ว +4

    I need Transit Engineering 101 to follow this. But, yes, I am skeptical of proprietary gadgetbahns, too.

  • @ViciousVince
    @ViciousVince 2 ปีที่แล้ว +2

    I have used the BRT in Jinan, Shandong, China, and for that size of city (3,25 million inner city, 5.6 million metro area, making it a smaller city by Chinese standards), it is ideal. Station stops are very efficient due to fare collection at the entrance to the platform. Miss a bus and the next one is following in 2-3 minutes. The only unanticipated delays are red traffic signals, and that's necessary for safety of others, especially bike and moped riders. More expensive options are not needed.

  • @lelandunruh7896
    @lelandunruh7896 2 ปีที่แล้ว +1

    I used to live in a somewhat steep city in Switzerland and they just had dual-mode trolleybuses which ran off of overhead lines in the city center and diesel in the suburbs and countryside. I don't know why more small-to-midsize cities in North America don't take advantage of this model, as the startup costs are relatively low and the flexibility of the system is quite good.

  • @Ratcher.
    @Ratcher. 2 ปีที่แล้ว +1

    Sapporo isn't only inside cause of the tires but also the 2nd snowiest city in the world. the amount of snow they get also hampers the rail

  • @Ortino
    @Ortino 2 ปีที่แล้ว +1

    The rubber tired tramway in Nancy, France has a very steep lane.
    But when there is snow or ice, they can use their diesel to follow the road (not as steep).
    Same for at least one of the parisian tramway, it climbs a big hill, that cannot be done using steel wheel.
    And for the parisian subway, for the line 6 (the aerial one with rubber), using rubber tires is much much quieter than steel. This is important when the subway is aerial in wealthy neighborhood. (The second aerial subway has steel wheel, but it moves in more popular neighborhood so....)

  • @maartena
    @maartena ปีที่แล้ว

    I haven't been in Paris since 1999, but when I was there we took the metro everywhere, and indeed..... they had rubber tire metro lines underground. I was intrigued, but it was a surprisingly comfortable ride.

  • @quentinbobin2549
    @quentinbobin2549 ปีที่แล้ว +1

    In Lyon, France, 3 of the 4 metro lines are rubber-tired lines. The 4th is “steel-tired” because is the oldest and the steepest (the oldest section open in 1891 as a funicular line) and the extensions in 1974. This line is among the steepest in the world with a 17,6% steep in the 1891 tunnel. Here the slope isn’t taken with rubber but with a rack rail as third rail. The train is powered by over wires. It’s so specific than Alstom had to design a specific train with this all tech only for Lyon metro system. The three other lines are very similar to Montreal metro

  • @luppano
    @luppano 2 ปีที่แล้ว +2

    Lyon is NOT using a VAL, it is using a full size metro, even wider than Paris metro actually. Both of them using standard UIC gauge.

  • @unlapras9365
    @unlapras9365 2 ปีที่แล้ว +1

    The RATP (the company running the Paris métro) itself gave up with rubber-tyres at the beginning of the 1970s because they realized steel weels were just more efficient and retrofitting existing lines was too expansive. However it was deemed worth it to implement rubber-tyres on metro systems built from scratch. That's why Lyon, Marseille and every VAL network are rubber-tyred. Paris line 14 (opened in 1998) is also rubber-tyred but that was mostly for rolling stock mutualisation.

  • @TravelSignal
    @TravelSignal 2 ปีที่แล้ว +1

    Medellin's hills are one instance where rubber tyres are vital. The city is along a valley, with the translohr up one side. Other perpendicular routes are operated by cable cars (gondolas) except regular metro along a side valley. But a trolleybus would also work - electric power but no track requirement.

  • @allyreneepenny9447
    @allyreneepenny9447 2 ปีที่แล้ว +3

    The Metro from Paris is so awesome 😍Better the the U-Bahn of Berlin! Brussel has a amazing system of Bus.Was called ,,Ringtram Bus ''❗

  • @samus4799
    @samus4799 ปีที่แล้ว +2

    I much prefer a roar to a squeal.
    Gonna submit a plan for that Neoval to my local planning department. It sounds great for residence-heavy mixed use applications less that 20k riders per day

  • @sorenfox
    @sorenfox 2 ปีที่แล้ว +6

    in my city (Perth, Australia) there's been something of a push for 'Trackless Trams' recently--specifically, the ART system by CRRC. Pretty funny to me, since 5 minutes of searching will tell you their weight and tyre configuration makes them illegal to drive on our roads.

    • @dustojnikhummer
      @dustojnikhummer 2 ปีที่แล้ว

      Why would they be illegal?

    • @neolithictransitrevolution427
      @neolithictransitrevolution427 2 ปีที่แล้ว +1

      I hoped thats what this video was about. I'm looking forward to the Trackless Tram, I'm sure they can change the law. What will be interesting is to see if the vehicle alignment causes rut formation and requires concrete guide way, at which point it loses all value.
      But, if Perth lets ruts for, rips up the road and builds a real Tram, and then puts the Trackless Tram on a new route to repeat, that would be something

    • @thegreentimtam
      @thegreentimtam 2 ปีที่แล้ว +7

      @@neolithictransitrevolution427 I don't get the trackless tram personally. Seems like a lot of work and expense for not much reward.
      I'd much rather see dedicated bus lanes and bus priority at traffic signals across all the 9xx bus routes, and maybe some rebranding, which would likely cost a fraction of the current vague plan to convert half a route to a "trackless tram".
      I also don't like that the City of Stirling is so obsessed specifically with the ART vehicle from CRRC. Volgren is making very similar vehicles for Brisbane Metro. But they're calling them what they are, buses. CRRC seems to be pretending they are in a different category in order to avoid a fair competitive tender process, and City of Stirling has fallen for the con.

    • @MarioFanGamer659
      @MarioFanGamer659 2 ปีที่แล้ว +1

      @@neolithictransitrevolution427 This reminds me on ideas about treating BRT and trolleybuses as a base for new tramways and LRT since their infrastructure costs are lower than building a street railway.

    • @neolithictransitrevolution427
      @neolithictransitrevolution427 2 ปีที่แล้ว +1

      @@MarioFanGamer659 I would love to see a jurisdiction explicitly set up a schedule for a project of that style. It's long time horizons, but you can cycle your Diesel buses onto a new route when they phase out, etc.
      At the same time you upzone along the corridor, so by the time an LRT is built you have a dense urban linear area.

  • @Jestersage
    @Jestersage 2 ปีที่แล้ว +2

    Really wish you can do a video on Morgantown's PRT. In a way it is also a "rubber tyre tram", which is powered by guide bar. And by nature, it is a gadgetbahn. However, from a different point of view, it's more of an attempt to make automated taxi thingy using 70s era technology, and the only practical (?) pod car system.

  • @kabongpope
    @kabongpope 2 ปีที่แล้ว

    Is the shot of the TTC streetcar at 6:52 a sumbliminal dig at "Bombardier's not-great moments"? LOL

  • @pizzaipinya2442
    @pizzaipinya2442 2 ปีที่แล้ว

    Fun fact: in Barcelona a similar vehicle operates as a superlarge bus in some of the busiest lines, but it is only that: a bus. When I saw the video image at first I thought you would talk about that hahah

  • @JordanRae
    @JordanRae 2 ปีที่แล้ว

    Worth mentioning that LIM systems (such as Vancouvers skytrain) don’t require traction of the wheels as the train is essentially being pulled a long and not driven by its wheels. This basically eliminates the issue of wheel slippage.

  • @pickles3361
    @pickles3361 2 ปีที่แล้ว +1

    btw they are removing the GLT here in Nancy too, current plan is to replace with trolly buses but who knows what will happen in the end

  • @Nunavuter1
    @Nunavuter1 2 ปีที่แล้ว

    "External factors" like building a streetcar/bus hybrid with rubber tires being adopted in a city with a large tire manufacturer being based in it. 8:29 A very diplomatic observation.

  • @supersabba73
    @supersabba73 2 ปีที่แล้ว

    In Padua, next to Venice, 2 more lines of the transhlor tram are being built. the system seems to be working decently

  • @SSimonDD
    @SSimonDD 2 ปีที่แล้ว

    Great Video! The screeching of steel wheels is really the biggest drawback, in my opinion (thinking of you, Toronto UPExpress…)

  • @creaturexxii
    @creaturexxii 2 ปีที่แล้ว +1

    More modern train systems like Canada Line for example, can climb relatively steep grades (4 to 5% from the looks of it). So rubber tires are kind of redundant and over complicated. Plus, when it comes to manufacturing and maintenance, uniformity is key.

  • @calvingreene90
    @calvingreene90 2 ปีที่แล้ว +1

    Proof that there's no idea so bad it won't be copied.

  • @eannamcnamara9338
    @eannamcnamara9338 2 ปีที่แล้ว +1

    Val my beloved 😍 . I find them really cute and it's nice for small cities.

  • @helvettefaensatan
    @helvettefaensatan 2 ปีที่แล้ว

    Fun fact: some (I'd say most but IDK) trolleybus systems have relied on backup generators. In case of line work, emergency, or to move around the depot. The trolleybuses in Bergen, Norway had backup generators until very recently when a lot of the normal busses were electrified and the trolleybuses got batteries too.
    Source: I live very close to said depot.

    • @helvettefaensatan
      @helvettefaensatan 2 ปีที่แล้ว

      Also: rubber tyres in Paris creates oscillation.

  • @hernandogaribaldi8627
    @hernandogaribaldi8627 ปีที่แล้ว

    Rubber trains are my favourite train type. Technically they are good in "sudden" elevation changes as well as harsh climates. An ingeneer in the mexico metro said the steel rail/wheel system is the actual guide of the train, the "guide bar" is only for the energy power.

  • @gondolagripes1674
    @gondolagripes1674 2 ปีที่แล้ว +4

    Tires are based, like the MPRT. They do allow for tight turns using 4 wheel steering.

    • @KaiHenningsen
      @KaiHenningsen 2 ปีที่แล้ว

      I don't see why you couldn't do that with steel wheels. In fact, I believe that at least some modern US freight train engines actually do that. (Probably helps especially with three-axle trucks.)

    • @gondolagripes1674
      @gondolagripes1674 2 ปีที่แล้ว

      @@KaiHenningsen we use them because of the steep grades along several portions of our track. The city is built on the side of a large hill and the majority of our guideway is elevated, so the cars have to be capable of going up steep grades at times.

  • @samuelese22
    @samuelese22 2 ปีที่แล้ว +1

    Mind. Blown!

  • @maquez650
    @maquez650 2 ปีที่แล้ว +1

    I would say that in some cities noise would also really play into it. A good friend of mine lives in the hague in the Netherlands, and the trams are insanely loud and seeing as there's about 8 lines running acros the intersection right next to his house, i could imagine rubber tires would actually be quite nice...

    • @timothystamm3200
      @timothystamm3200 2 ปีที่แล้ว

      Might actually be louder if they are rubber tired, see the roar referenced in the video.

  • @tonychesser8710
    @tonychesser8710 2 ปีที่แล้ว +1

    The Metro in Santiago, Chile has rubber-tired rail systems. Don't know that they were pneumatic, though; they were very thin.
    No squealing metal-wheels-on-metal tracks. Quiet. Smooth-riding; no clickety-clack as you ran over seams in the rails. Really good acceleration and deceleration; I quickly discovered that I needed to hang on in both cases; not usually the case.
    It's my understanding that the Inter-City Express also uses thin, rubber tires mounted to the hard, steel wheels and that's a large part of what allows smooth rides at high speeds.

  • @LouisPeplerify
    @LouisPeplerify 2 ปีที่แล้ว +1

    Regarding the noise: when I ride the VAL here in Toulouse I feel like I'm riding on a vacuum cleaner

  • @urbanfile3861
    @urbanfile3861 2 ปีที่แล้ว +1

    VAL system is also used for Turin's metro

  • @egyphon
    @egyphon 2 ปีที่แล้ว +3

    I clicked on this because I recognized my tram (Bombardier in Nancy, France) on your thumbnail. It actually limped to its inaugural day, pulled by a wrecker, and since then, it's been 20 years of throwing money at it to make it kind of work... Finally it will be put out of its misery in the coming months and be replaced by super long buses with optical guiding or something like that.

  • @thomasrichard7150
    @thomasrichard7150 2 ปีที่แล้ว +2

    If I’m not mistaken, the Nancy rubber tire tram is going to be replaced by standard trolley buses.

  • @spoonikle
    @spoonikle 2 ปีที่แล้ว +33

    I really liked visiting Montreal’s metro.
    It was so quiet and pleasant.
    Tire roar is far less triggering to me and I am sure other autistic people thank those tires. Metros are already over stimulating, the sudden metal screeches just push me over the edge.
    The bouncing was fun too lol. Why is this not a pro? Sure its not “smooth” like Japanese rail, but nowhere in North America has well made rail and bumps on that are bone rattling.
    I dont know where you mentioned efficiency, if at all - but i figured that the real issue was rolling resistance and vastly increased energy use.
    Is this not the case?

    • @spoonikle
      @spoonikle 2 ปีที่แล้ว +5

      Some comments mentioned VOC’s at 2.5 PM - thats very concerning. Maintenance and wheel replacement less so honestly. From a waste perspective its hardly an issue compared to the cars taken off the road.
      I concede, that better maintained and newer iron wheel configurations are a better use of funds. As any desired outcome from rubber tires can be achieved with steel, and perhaps a hybrid system that transitions to rubber on steep hills for places that need it.
      This comment only contests that tire roar and steel on steel clacks/screeches are equivalent sounds even at the same decibel level - because they are not for many who suffer from noise sensitivity. Or that a bouncy ride is equally bad as a bumpy one. Sports car over cobble road or a pick-up truck - which feels nicer? The road didn’t change, just how soft the suspension is.

    • @moshedayl3064
      @moshedayl3064 2 ปีที่แล้ว +10

      The Autism factor can work the other way for other people.
      I'm autistic and have ridden the metro in Montreal, in terms of overstimulation I def handle the steel screech better than the roar of the rubber tires. Also the smell...
      But that's just me, obvi autism is going to affect people differently

    • @theexcaliburone5933
      @theexcaliburone5933 2 ปีที่แล้ว +5

      I’m pretty sensitive to loud noise and I’d much rather hear an occasional screech than a constant deep roar

    • @christopher6895
      @christopher6895 2 ปีที่แล้ว +8

      The decibel level of the Montreal metro is absolutely insane compared to the TTC. Objectively those rubber tires are causing permanent heating damage non-stop. The infrequent and short lived screeching on the TTC is a far lesser issue imo.

    • @_me-ta-_3780
      @_me-ta-_3780 2 ปีที่แล้ว +2

      I can't say I feel the same, I moved to a city that uses steel wheel trains exclusively, and I find it so much more relaxing than the constant Godzilla roar of the Montreal metro. It helps that the line I use to commute is mostly in a straight line so there is less screeching than usual, but I prefer the occasional loud screech to a constant highway sound. It's so loud you actually have to almost shout to have a conversation with someone.
      Not to mention the STM rolling stock (both the old and especially the new Azur trains) have a ton of wind blowing inside. Both because they're semi-open (which doesn't help with the roaring) and because the Azur has an insanely strong fan blowing air. I would often get a headache just commuting 20 minutes on the Montreal metro.
      Also the great thing about steel wheel trains is the satisfying ka-chunk-ka-chunk sound when going through railway switches :)

  • @virgilwilliams2378
    @virgilwilliams2378 2 ปีที่แล้ว

    I love hearing the loud steel on steel squealing sound on the subway.

  • @btudrus
    @btudrus 2 ปีที่แล้ว +7

    Maybe you should also make a video about trolley-busses, quite popular in the eastern Europe.
    The main advantage is that you don't have to lay any rails, only the trolleys and you have some (very little) flexibility while driving (if there is a pothole, for example, you can drive around), but you don't have the pollution from the combustion engine.

    • @siggestaexs8745
      @siggestaexs8745 2 ปีที่แล้ว

      maybe you should check his channel

  • @mathyeti
    @mathyeti 2 ปีที่แล้ว

    Just wondering ... at 1:47 it sounded like, and the closed caption translated, "Santiago de Lazan". I couldn't find anything like that on Google or Wikipedia .

  • @slippulter8053
    @slippulter8053 2 ปีที่แล้ว

    9:00 What is the advantage of the translohr there over a regular trolley bus? Both are electric, both use rubber tires, both require power cables and use panthographs, but the translohr is also niche and has only one supplier, and needs more infrastructure in the guide rail and stronger concrete?

  • @gossettcd
    @gossettcd 2 ปีที่แล้ว +1

    Have you ever done a video on the guided bus systems like Cambridgeshire, Adelaide O-Bahn, etc?

  • @steve3131
    @steve3131 2 ปีที่แล้ว

    Medellin already has a steel wheel metro and was considering a trolleybus system a few years ago. The trolleybus operation would have made more sense if there was no way to get around the steep incline.

  • @jeanphilippeardrone5135
    @jeanphilippeardrone5135 2 ปีที่แล้ว +2

    Val for Lyon ? never heard of this. Do you have a source to share ? I'm really curious about it

  • @YourLocalGP
    @YourLocalGP 2 ปีที่แล้ว

    Occasionally, during extreme temperature periods in London, tube lines will be closed because the noise from screeching steel wheels on steel rails is too high for legal levels.