PR doesn't have anything to do with the quality of the locks. good companies can have crippling PR disasters that end them, while bad companies can keep going forever as long as they can convince people their products are good. *glares at masterlock*
@@doloresmeatrestauranteater1451 Ha. Masterlock also gets away with being rather cheep as well, some people just want quick and easy rather then the best.
Back before ASSA got hold of them and their locks were still affordable I had a Mul-T-Lock cylinder on my front door. I can't afford them now. The general public don't know about locks at all and if they buy a padlock in any of the big DIY stores they will find a choice of Master lock or Chinese pot metal crap.
@@HannTheftAudio If he must pick the lock in order to open it, it should be begin to be rated from Silver Plus, if he can't pick a lock that would be God-Tier
@@Yoda-177 wanna bet? if you're persiste ie h3 nt enough you'll they it open with no training whatsoever. if he can pick that lock then anyone else can too.
@@HannTheftAudio he's literally said there's not really any key locks that can't be picked given time and tools it's about making it a bitch for the people picking it and seeing as he can get into locks without even having to pick it a lot of the time it's definitely a solid lock idea.
Why'd you have to go and make things so complicated? I see the way you're acting like you're somebody else. Gets me frustrated. Just admit that you love the videos I make, my dear 3x
Yeah for real, idk what the UK was on about, that's the most effective security measure I've seen used against LPL (discounting any times he's tried to pick locks with handicaps like picking with one hand in a jar of honey and the other weighing a chainmail glove, etc)
Or if he can't do it, then was it ever a vulnerability to be concerned about? Sounds like some misleading bad press could have potentially ruined the company.
He has been showcasing those Chinese picks fairly frequently, but that is no doubt because he is balancing the business between here and his Covert Instruments site where you can buy them.
Why the hell doesn't the news run a story about how lousy Master Lock is so they can issue an apology and start making better locks? Just kidding, they will always be awful.
Probably because people feed ML enough money to hire enough lawyers to ruin any news organization’s decade. Though anti-SLAPP laws ought to offer some protection now. Also, it’s not “news” anymore. They’ve always been trash, but a newcomer with a “flaw” is fresh meat.
@@justins8802 More likely the CEOs of both Masterlock and (insert whatever crappy corporate news network here) went to Harvard together and now play golf once a month to keep up their partnersh... I mean friendship...
I’m curious about this “foil impressioning” technique - could this be attempted in a different video? I know that it has been unsuccessful in the past, but I’d like to know the theory
Watching your vids encouraged me to get my own set of picks and practice locks. I did my first single-pick 5 pin the other day and so damn proud of myself... Thanks LPL! Love your work
So the alleged foil impressioning is actually difficult to do and single pin picking is difficult as well. That sounds weird - how real was that exploit then?
@@NigelTolley I'm a certified idiot, so you might want to take that up with The LPL who said he couldn't get it to work with the three locks he tried it on. [edited for clarity]
LPL: This was apparently subject to a foil impressioning attack. Though I've never been able to get that to work... I'm satisfied that it was not a significant vulnerability.
LPL is the kind of guy who would not only tell someone to shut up, but also explain the person's reasoning back to them, while listing 27 reasons of why they should've never opened their mouth in the first place.. and I wouldn't want it any other way! You rock, LPL!!
Why I watch these videos: - 50% because it‘s entertaining to watch a skilled person mastering his craft/art - 50% because how he pronounces „Lockpicking Lawyer“ - almost sings it. This just goes down like butter
I’m Italian and watch with lot of interest mr LPL videos. I find extremely useful all this and I do believe his skills are very welcome by any lock producer who will improve their locks performances. This eventually will have a fall down for all modest users as we are. Tks
The number of companies Assa Abloy has bought is pretty amazing. I worked for SA Lock, which was acquired by Sargent Lock. Sargent Lock had been bought by Assa Abloy in 1996 (before they bought us, which I think was somewhere around 2006). Assa Abloy is a Swedish company, and they can be a real pain in the ass.
I think we need to add a few challenges for LPL to actually have a hard time . Like locked in a cage over a pit of Komodo Dragons and LPL has a minute to escape before the cage bottoms out
Make it also an audio-book, and I can be lulled nicely to sleep at night by LPLs soothing voice. It's a win-win situation, learning something new, and sleeping like a baby.
This Channel is just perfect. Numbered Videos. No Clickbait thumbnails. Videos as long as they have to be. No Bullshitting around. Clear and easy to understand voice. i stole this comment of 1 year ago cause i still perfectly agree
I once had the fortune to watch a master foil impression his way into a Gamma Mul-T-Lock. I was impressed that's for sure and was never able to reproduce a successful opening using his method and choice of foil.
Now imagine the dexterity to see with your hands and fingers the inner and outer pin orientations and keep in mind where pins are binding and where they have clicked into position. This is much more coordination of hand and mind work than the average person is capable of. These are very well done vids and they easily convince me to never try picking locks myself.
They make me wanna try it with cheap locks and a Bobby pin. 😆 I was gonna say his ability is astounding! Almost like he has xray vision and super senses. It's almost disappointing how fast he can get things open. No way could most of us do that even given the tools and a tutorial.
This is more like it. Love the traditional picking video. I enjoy watching you use your steady hands to crack into almost every consumer grade lock. Prefer these over the Lishi tool videos.
I am pretty sure there are only 4 criteria. 1: It fits snugly enough to turn the lock. 2: It doesn't get in the way of picking the pins. 3: It is strong enough that it won't break off in the lock. 4: It is close enough to him to be convenient to grab.
Experts in anything are always the best people who you have nothing to worry about if you’re not going out of your way to bother them. It’s always half-wits who have something to prove and don’t take the time to get the real skills who are the trouble makers.
I remember these locks from about 25 years ago. You could get a version that came with a 2 halfs metal zig zag cover to weld on shipping container doors to keep the lock away from cutting tools. They were quite popular at the time.
I think the issue here is linear thinking. The reason you have warding on your lock is to make picking harder, by making it physically difficult to get the pick into the right place. I suspect the designers thought that the pin-in-pin design already made picking hard enough, so they didn't need warding. (You need special tools and, if LPL takes a minute and a half to pick a lock, an average lock picker will need half an hour minimum.) Since "the" reason for warding wasn't applicable, they probably didn't consider side-benefits of warding. And, since warding has a definite cost (harder to machine the cylinder and the keys), there's commercial pressure to avoid it if possible.
Could someone explain "nice click" and "false set"? I always imagine that with a "false set" you would have to start over, but I never tried picking a lock myself.
A "nice click" is when a pin is pushed fully clear of the shear line, allowing the tensioner to rotate the cylinder until the next pin binds. A false set is when a security pin such as a spool is pushed into a position where a narrow part of the pin is across the shear line. This allows the cylinder to turn a little, but not as far as it would if the pin was fully clear of the shear line. If you don't know what I mean by "shear line", search for a video of somebody picking a transparent lock to show how single-pin picking works. (It's so much easier to see it graphically than for somebody to try to explain it in words.)
I just got me self a nice cheap lock picking set from Ali ($20 or so) and several Yale pad locks (the good ones, with security pins and all) and went on picking. Took me about 30 minutes to pick the first time, now i can pick open pretty much any Yale and old Mul-t-lock (the new ones are a bit too much for me at this stage) in under 5 minutes. It's pretty intuitive once you start doing it, you can actually feel the individual pins and their nature, the counter rotation, the false set, the clicks. Just get a set man, you'll like it, i promise :)
@@beeble2003 Thanks a lot, I did understand your explanation. It sounds like he never pushes a pin past the shear line, where he would have to start over. Is that true? If he did , does it have a name? Maybe "over set?"
I'd very much like you to look deeper into that "foil impressioning" attack because to me it smells a bit like bullshit. I dunno, maybe you could explain the theory a bit more.
Same concept as the tubular lock 'bic pen lid' impressioning attack. Cut the tip of a pen lid at the point where it tapers out enough to fit in the lockway. Mash and twist the lid until the plastic is deformed and the keyway turns. For the dimple locks, you need a key drilled to max depth. Wrap it in a stiff foil then slide in, wiggle and turn. The foil depresses as you wiggle and the spring fights back. The turning gets the pin bound open under tension. A bit of practice can get the lock open. The inner pins are all the same length so when you press them hard they deform the tool at the maximum depth, exposing the cut depth. Back off a little on the pressure and your 'key' is aligned.
I just priced them on Amazon Mexico. They are NOT cheap, but I suppose that’s relative to either the price of other locks or how much you value your stuff or your life. The later comparison is the wiser one.
Mul-T-Lock was very popular in Poland about 20-30 years ago, as an additional car protection (gear lever lock). I remember they used the very same keys.
@@TheAnonyy just report the spammer unfortunately it doesn't get rid of every comment they've made (I don't think it does anyway, I could be wrong) so you have to report each one manually
@@pigfish99 He typically picked the locks many times before going on video. So he kinda flies by quickly. So his videos are short and sweet and very smooth. He doesn't really go into technical detail tho. His previous (much older ones) video are more entertaining than Lishi IMO. It takes a lot of skills to use the Lishi. I'm sure lot will struggle to pick the lock even they are equipped with a Lishi. LOL. You really have to learn lock picking to be able to use Lishi effectively.
It always cracks me up when he says "Let's see what it takes to pick this open" when we all know my man has picked these locks more times than some owners have ever unlocked it with a key. :D
I have no interest in locks and don’t have anything worth securing and yet- here I am glued to my phone screen and able to recognise a good lock from the amount of time A LPL video runs for!
I'm sure that TV program made it seem like the impressioning attack was so easy that every bike thief would now forget the bolt cutters, run out to buy key blanks and a drill press, and become expert overnight. Must have been very frustrating for the folks at Mul-t-lock.
![[927] The Strongest Padlock in the World (Seriously) - Squire Stronghold SS100CS](http://i.ytimg.com/vi/nwgwCmh7SGg/mqdefault.jpg)
![[927] The Strongest Padlock in the World (Seriously) — Squire Stronghold SS100CS](/img/tr.png)
![[1394] Mul-T-Lock Round Body Padlock Picked](http://i.ytimg.com/vi/rHIDXJ6h0uY/mqdefault.jpg)
A bit ironic that a lock company that suffered such a PR hit turned out to have one of the more difficult locks on this channel
PR doesn't have anything to do with the quality of the locks. good companies can have crippling PR disasters that end them, while bad companies can keep going forever as long as they can convince people their products are good.
*glares at masterlock*
@@doloresmeatrestauranteater1451 Ha. Masterlock also gets away with being rather cheep as well, some people just want quick and easy rather then the best.
@@doloresmeatrestauranteater1451 it's still ironic, because their bad PR was centered around the allegedly poor quality of their locks
Back before ASSA got hold of them and their locks were still affordable I had a Mul-T-Lock cylinder on my front door. I can't afford them now.
The general public don't know about locks at all and if they buy a padlock in any of the big DIY stores they will find a choice of Master lock or Chinese pot metal crap.
@@donaldasayers “Masterlock or Chinese pot metal crap”…. Why did you say the same thing twice?
This lock survived a lot longer than the general videos. This should be diamond rated.
Considering that he managed to pick it i don't think so. It shouldn't even be a bronze. If he can pick it then so can we and that's a disaster.
@@HannTheftAudio What are you talking about it's not like he is a beginner and what he is doing is not just easily repeatable by everyone
@@HannTheftAudio If he must pick the lock in order to open it, it should be begin to be rated from Silver
Plus, if he can't pick a lock that would be God-Tier
@@Yoda-177 wanna bet? if you're persiste ie h3 nt enough you'll they it open with no training whatsoever. if he can pick that lock then anyone else can too.
@@HannTheftAudio he's literally said there's not really any key locks that can't be picked given time and tools it's about making it a bitch for the people picking it and seeing as he can get into locks without even having to pick it a lot of the time it's definitely a solid lock idea.
Decent padlock, took longer than usual to hear the words "and we got this open" 🔓
hello random verified person, i'll just leave this here before his comment blows up
When LPL utters those words, as an immortal higher being, anything will open before him.
Have to remember lol isnt a strong impressioner as its least used entry methood.
Even more impressive considering the video is only three minutes as well
I love how this dude picks the lock inside two minutes and we’re all like “wow that’s a really secure one”
To be fair it usually takes him 30 seconds to pick a lock
Lol thats because a regular Joe would be sitting there for 30 mins. Got multiply the time LPL takes by about 10 - 20. Lol.
Keep in mind that the LPL is the Houdini of lock picking
1:10 - 2:40 to pick. I dare say that’s an excellent lock if it takes LPL that long.
Why'd you have to go and make things so complicated? I see the way you're acting like you're somebody else. Gets me frustrated. Just admit that you love the videos I make, my dear 3x
When will locks start to have the length of LPL’s video printed on their packaging ? 😃🤣😜
@@AxxLAfriku What in the world are you on about?
@@IronHexacyanoferrate it's an avril lavine song
Yeah for real, idk what the UK was on about, that's the most effective security measure I've seen used against LPL (discounting any times he's tried to pick locks with handicaps like picking with one hand in a jar of honey and the other weighing a chainmail glove, etc)
"And WE'VE got this open." Congratulations to everyone that participated 👏🏼👏🏼👏🏼
I like to imagine that there's a small subset of viewers going "ooooh I have that lock" picking along.
Thanks Scott, it was a hell of an effort.
I was worried when we dropped into a bit of a false set…but we pulled together at the inner pin on 4!! !
@@shitzuation 😂
Are you saying we're no more of a team than those staying in the same hotel?
I would like to see the 'foil impressioning' thing that you mentioned, even if it's a failure.
I was going to post the exact same comment. Would be interesting to see how it's supposed to work.
Deviant olam== for ever lock== foil impression== example of what goes on
You want to see the LPL fail 😲
@@grahamwilkinson6902 doesn't everyone? we need to know the limit of his power
Or if he can't do it, then was it ever a vulnerability to be concerned about? Sounds like some misleading bad press could have potentially ruined the company.
The LPLTTPR (LockPickingLawyer Talk to Pick Ratio) is pretty good on this one. Better than most.
LPLTTPR should be a golden standard.
@@MartienBLY We could call it TLPLTTPRN for short
Now I will always watch for the Talk to Pick time ratio to choose my locks
What about when he picks something repeatedly so we can see it wasn't a fluke?
@@WolfgangDoW Then the faster time is the one that count.
Is it just me or has it been a while since we’ve had a good old fashioned pin for pin picking video?
He has been showcasing those Chinese picks fairly frequently, but that is no doubt because he is balancing the business between here and his Covert Instruments site where you can buy them.
I stopped watching his videos because of this
@@PRO100Dreik What, because he has the nerve to earn an income? How dare he!
@@marvindebot3264 no but probably because those videos are boring
@@marvindebot3264 he can do whatever he wants, It's just not interesting to watch, for me at least
"So... enough history, let's see what it takes to pick..."
No, I want more history!
"The Gamma Key Affair" ...sounds like a 'Man from U.N.C.L.E.' episode =))
Dang, that took a good while.
A grinder is quicker
He’s rusty with all that Lishi shit
Yeah a minute and 30 seconds I think
LPL uses MORE than a minute to pick a lock, it's good enough for me!
I like how he always says "WE got this open" so it makes us feel like we helped by watching or something.
This was an unusual video to say the least, no number, a lock that actually takes some time, LPL pin picking the old way, nice
@Amina & Hiba Show stfu
@@mahbodkaramoozian6409 it’s a bot. Report and move on
@@mahbodkaramoozian6409 they have spammed all the comments I've reported most help keep LPL comments free of trash.
@@drigger225 i already did it
He added the number now. [1338].
this lock took a solid minute and a half to open it must be a really really good lock
Why the hell doesn't the news run a story about how lousy Master Lock is so they can issue an apology and start making better locks? Just kidding, they will always be awful.
Probably because people feed ML enough money to hire enough lawyers to ruin any news organization’s decade. Though anti-SLAPP laws ought to offer some protection now.
Also, it’s not “news” anymore. They’ve always been trash, but a newcomer with a “flaw” is fresh meat.
@@justins8802 More likely the CEOs of both Masterlock and (insert whatever crappy corporate news network here) went to Harvard together and now play golf once a month to keep up their partnersh... I mean friendship...
@asdrubale bisanzio You missed the point entirely.
@@ftswarbill > Hell's Bells, mate. Take a deep breath and relax. No need to attack people just because they didn't fawn over your own comment.
The news doesn't report anything useful. They're too busy bagging on Trump or brown nosing Dems.
I purchased an impressioning kit for multilock I never got it to work. Thank you for referencing this I feel so much better.
I’m curious about this “foil impressioning” technique - could this be attempted in a different video? I know that it has been unsuccessful in the past, but I’d like to know the theory
th-cam.com/video/PU8pzZ6h5xk/w-d-xo.html
DeviantOllam
@@smokinsoldier6892
Thx
Honestly any lock that has him saying "false set" is probably decent enough.
He said it a few times too
A *deep* false set!
Watching your vids encouraged me to get my own set of picks and practice locks. I did my first single-pick 5 pin the other day and so damn proud of myself... Thanks LPL! Love your work
"special tools and skill" ..............pretty good lock.
LEET H4X0R SKILLS :D
I picked my first lock today with the help of your videos. Thankyou
Your competence in picking these locks is very reassuring during a tough day at work. Thank you for what you do.
So the alleged foil impressioning is actually difficult to do and single pin picking is difficult as well.
That sounds weird - how real was that exploit then?
Probably a fluke since I assume they didn't do it twice
It was a BBC feature, how real is anything on there?
@@SuperAWaC got a link to the video?
YerisR foil impressioning is idiot proof. Put it in and wiggle for an open.
@@NigelTolley I'm a certified idiot, so you might want to take that up with The LPL who said he couldn't get it to work with the three locks he tried it on. [edited for clarity]
Lock picking on this channel sometimes has a kind of dentist vipe to it... Probing the teeth, finding the crack, giving it a little twist and done...
Problem is when i go to the dentist it is almost always freakin' painful. Not in LPL's case though
Dentist vipers, sounds dangerous
Gotta say... you might want to double check if you have an actually licensed dentist and not some con-artist if that's your experience lol.
@@eksentrysyti 😂😂😂 good one. Does a vet count??
Spit!
LPL: This was apparently subject to a foil impressioning attack. Though I've never been able to get that to work...
I'm satisfied that it was not a significant vulnerability.
Nice to see something a little more of a challenge to pick. Awesome vid!
If it takes LPL over 75 seconds to pick these locks, then I’m a buyer.
Now that's was a tricky little sucker (and I'm sure it wasn't a fluke :)
But he only did it once. How can you be sure?
He could probably pick a Fluke multimeter twice and prove it’s not a Fluke.
LPL is the kind of guy who would not only tell someone to shut up, but also explain the person's reasoning back to them, while listing 27 reasons of why they should've never opened their mouth in the first place.. and I wouldn't want it any other way! You rock, LPL!!
Why I watch these videos:
- 50% because it‘s entertaining to watch a skilled person mastering his craft/art
- 50% because how he pronounces „Lockpicking Lawyer“ - almost sings it. This just goes down like butter
The lock that caused all the PR problems was still 10X harder to pick than 90% of all other locks lol
I’m Italian and watch with lot of interest mr LPL videos. I find extremely useful all this and I do believe his skills are very welcome by any lock producer who will improve their locks performances.
This eventually will have a fall down for all modest users as we are. Tks
When most locks on the channel are busted in seconds, it's honestly impressive as hell to see one hold out for a minute and a half.
Seems to be a pretty good lock. I've never seen him picking that long
I'm impressed with this lock!
This dude is unstoppable, been watching him pick these locks for years. Truly amazing. Should be called "The Lock Picking Baddass"
at this point it's the other way around, people who want to call themselves lockpicking badasses aspire to the level of the LPL
The number of companies Assa Abloy has bought is pretty amazing. I worked for SA Lock, which was acquired by Sargent Lock. Sargent Lock had been bought by Assa Abloy in 1996 (before they bought us, which I think was somewhere around 2006). Assa Abloy is a Swedish company, and they can be a real pain in the ass.
I think we need to add a few challenges for LPL to actually have a hard time . Like locked in a cage over a pit of Komodo Dragons and LPL has a minute to escape before the cage bottoms out
LPL would still escape, with his standard carry pocket knife in hand, komodo barbecue would ensue in 9...8...7...
@@theokamis5865I forgot about the pocket knife , It is truly magical
Enough history? I beg to differ. How about a book written by LPL about lock history like the story shared in the video? 😊
That's actually a good idea. I just hope he doesn't include humour. The guy sucks at humor.
i would buy any book lpl made
Make it also an audio-book, and I can be lulled nicely to sleep at night by LPLs soothing voice. It's a win-win situation, learning something new, and sleeping like a baby.
@@GalizurHaMalakh I came here to say this! I'd love if he did audio books.
Screw the book...i want him on retainer as my lawyer lol
Thank you I have learned a lot from your show thank you keep up the good work love you as a friend goodbye
This Channel is just perfect.
Numbered Videos.
No Clickbait thumbnails.
Videos as long as they have to be.
No Bullshitting around.
Clear and easy to understand voice.
i stole this comment of 1 year ago cause i still perfectly agree
I once had the fortune to watch a master foil impression his way into a Gamma Mul-T-Lock. I was impressed that's for sure and was never able to reproduce a successful opening using his method and choice of foil.
@Amina & Hiba Show WTF is that unrelated SPAM got to do with lockpicking!
@Amina & Hiba Show God hates spammers.
@@debesys6306 Visit offenders channel/about page and select block and/or report anti-social users behaviour to TH-cam.
You know it's a decent lock when he starts picking with 2 mins left
It's 2 am and outside your door you hear someone whispering "2 is binding... Three is clear..."
Now imagine the dexterity to see with your hands and fingers the inner and outer pin orientations and keep in mind where pins are binding and where they have clicked into position. This is much more coordination of hand and mind work than the average person is capable of. These are very well done vids and they easily convince me to never try picking locks myself.
They make me wanna try it with cheap locks and a Bobby pin. 😆 I was gonna say his ability is astounding! Almost like he has xray vision and super senses. It's almost disappointing how fast he can get things open. No way could most of us do that even given the tools and a tutorial.
What was the TV programme on which it was picked?
That's a damn fine lock
LPL's great great great grandfather figured out how to pick chastity belts. That's why we have this great channel.
This is more like it. Love the traditional picking video. I enjoy watching you use your steady hands to crack into almost every consumer grade lock.
Prefer these over the Lishi tool videos.
It would be interesting to hear why you choose a certain tension bar or pick over another. Love watching your vids!
I'm pretty sure z-bar just sounds cool. I wanna know why he and Bosnian Bill haven't made a tool for this, lol
I am pretty sure there are only 4 criteria.
1: It fits snugly enough to turn the lock.
2: It doesn't get in the way of picking the pins.
3: It is strong enough that it won't break off in the lock.
4: It is close enough to him to be convenient to grab.
He has a video about this from a long time ago
@@DobesVandermeer Probably this video? th-cam.com/video/9O-CJEwcQnY/w-d-xo.html
I got conflicting feelings about LPL... I would love to have him live nearby if I would ever need help... But I don't want him to know where I live.
Experts in anything are always the best people who you have nothing to worry about if you’re not going out of your way to bother them. It’s always half-wits who have something to prove and don’t take the time to get the real skills who are the trouble makers.
Most impressive endorsement I've seen on this channel. Off to check the price on the new version.
I remember these locks from about 25 years ago. You could get a version that came with a 2 halfs metal zig zag cover to weld on shipping container doors to keep the lock away from cutting tools. They were quite popular at the time.
He spent most of the video picking the lock? Well thats a 10/10 lock.
I enjoy these normal picking
I concur.
Lishi picks make it look boring
The best hands on TH-cam.
This is pure marketing gold for Mul-t-lock.
I thought having warding on your lock was covered in lock-design 101, right after shielding and over-lifting.
I think the issue here is linear thinking. The reason you have warding on your lock is to make picking harder, by making it physically difficult to get the pick into the right place. I suspect the designers thought that the pin-in-pin design already made picking hard enough, so they didn't need warding. (You need special tools and, if LPL takes a minute and a half to pick a lock, an average lock picker will need half an hour minimum.) Since "the" reason for warding wasn't applicable, they probably didn't consider side-benefits of warding. And, since warding has a definite cost (harder to machine the cylinder and the keys), there's commercial pressure to avoid it if possible.
No warding on most KABA dimple keys and they don’t suffer with less security. Tolerance is what makes these superior.
Nice lock.
Awesome video LPL!😸
The man continues to prove he’s a top get for your post apocalyptic questing party.
Could someone explain "nice click" and "false set"? I always imagine that with a "false set" you would have to start over, but I never tried picking a lock myself.
A "nice click" is when a pin is pushed fully clear of the shear line, allowing the tensioner to rotate the cylinder until the next pin binds. A false set is when a security pin such as a spool is pushed into a position where a narrow part of the pin is across the shear line. This allows the cylinder to turn a little, but not as far as it would if the pin was fully clear of the shear line. If you don't know what I mean by "shear line", search for a video of somebody picking a transparent lock to show how single-pin picking works. (It's so much easier to see it graphically than for somebody to try to explain it in words.)
I just got me self a nice cheap lock picking set from Ali ($20 or so) and several Yale pad locks (the good ones, with security pins and all) and went on picking. Took me about 30 minutes to pick the first time, now i can pick open pretty much any Yale and old Mul-t-lock (the new ones are a bit too much for me at this stage) in under 5 minutes. It's pretty intuitive once you start doing it, you can actually feel the individual pins and their nature, the counter rotation, the false set, the clicks.
Just get a set man, you'll like it, i promise :)
@@beeble2003 Thanks a lot, I did understand your explanation. It sounds like he never pushes a pin past the shear line, where he would have to start over. Is that true? If he did , does it have a name? Maybe "over set?"
@@pepperpepperpepper I think that’s called over-setting, yes.
@@beeble2003 Thank you!
Was 1337 the last number on purpose? I will miss them.
What is the significance to 1337?
@@james4thedoctor482 Translates to LEET in leetspeech - if you want to to know more about that there is wikipedia
LEET H4X0R SKILLS !
It's got a number now, I guess he just forgot?
The public flogging of the garbage vendors is needed, but this is the content I’m here for.
That's practically a glowing recommendation right there.
I'd love to see a pressure gauge on his turning tool so us novices could understand how hard he's pressing
He's pushing as hard as it seems. It's not that complicated.
I'd very much like you to look deeper into that "foil impressioning" attack because to me it smells a bit like bullshit. I dunno, maybe you could explain the theory a bit more.
Same concept as the tubular lock 'bic pen lid' impressioning attack. Cut the tip of a pen lid at the point where it tapers out enough to fit in the lockway. Mash and twist the lid until the plastic is deformed and the keyway turns. For the dimple locks, you need a key drilled to max depth. Wrap it in a stiff foil then slide in, wiggle and turn. The foil depresses as you wiggle and the spring fights back. The turning gets the pin bound open under tension. A bit of practice can get the lock open. The inner pins are all the same length so when you press them hard they deform the tool at the maximum depth, exposing the cut depth. Back off a little on the pressure and your 'key' is aligned.
What? It took more than a minute for LPL to pick the lock? Give the lock manufacturer a diamond medal!!
Mul-T-Lock locks are used all around Israel and I personally have one in my door, good to see it took you some time to pick...
I just priced them on Amazon Mexico. They are NOT cheap, but I suppose that’s relative to either the price of other locks or how much you value your stuff or your life. The later comparison is the wiser one.
The gamma key: controversial second only to this video’s lack of numbering, according to the subscribers.
It has a number, now. And I hear you get a discount if you want to trade in your un-numbered viewing for a numbered one.
How will you reference this video in the future?!
Mul-T-Lock was very popular in Poland about 20-30 years ago, as an additional car protection (gear lever lock). I remember they used the very same keys.
Good for them for learning from their mistakes, even when the original lock was still pretty good!
If tit takes 30 seconds for him to open the lock it is good
i've heard of them multiple times, and I know nothing about locks
Cre I would delete your comment and add it ok again to get rid of this person spamming this channel with unrelated religion.
@@TheAnonyy just report the spammer
unfortunately it doesn't get rid of every comment they've made (I don't think it does anyway, I could be wrong) so you have to report each one manually
@@or_not_er it helps if everyone reports him, I have. Although I just ignore it though. Thanks anyway
That took a good amount of time, I'd say that seems to be a better lock than most featured here.
oooohhhh an actual lock picking video. nice, and it took a good bit of work. This is the good stuff.
Finally something that doesn’t use a Lishi. Good pick LPL.
I like the lishi mainly because it lets us see what the cuts are like, and how he can tell if they're binding or loose.
LPL #1139: ... and here the same lock picked again with the tool Lishi and I made ;-)
@@pigfish99 He typically picked the locks many times before going on video. So he kinda flies by quickly. So his videos are short and sweet and very smooth. He doesn't really go into technical detail tho. His previous (much older ones) video are more entertaining than Lishi IMO. It takes a lot of skills to use the Lishi. I'm sure lot will struggle to pick the lock even they are equipped with a Lishi. LOL. You really have to learn lock picking to be able to use Lishi effectively.
here before the video number
I’m always amazed at how easily your able to open 🔒 locks 🔐.
Nice video glad to see it :)
Here before the video number.
A hacker from video *[1337]* hacked out the video number!!!
This video reminded me that I forgot to lock my exterior basement door. Good timing!
This lock has a 80SLPLR security rating: 80 Seconds Lock Picking Lawyer Resistance
Nice
Nice video as always. That lock is quite sleek looking, even if it has the foil vulnerability
I like your narrative style as you pick your lock
It always cracks me up when he says "Let's see what it takes to pick this open" when we all know my man has picked these locks more times than some owners have ever unlocked it with a key. :D
Thanks LPL
I have no interest in locks and don’t have anything worth securing and yet- here I am glued to my phone screen and able to recognise a good lock from the amount of time A LPL video runs for!
Every video needs to start ending with “we’ll leave the light on for you”
Ah the old classic 06 key way. I’m sure we are all aware of 01-05 as well. Great job LPL
OMG! More than 30 seconds for him to open this! Must be a God lock!
'We got this open' as we bask in the reflected glory
That was a satisfying pick. Probably my favourite so far.
High praises.
I'm sure that TV program made it seem like the impressioning attack was so easy that every bike thief would now forget the bolt cutters, run out to buy key blanks and a drill press, and become expert overnight.
Must have been very frustrating for the folks at Mul-t-lock.