EP.7 1995 Nissan D21 Hardbody gets new steering column & WHEEL! PT. 2

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 21

  • @skatedeath2186
    @skatedeath2186 หลายเดือนก่อน +2

    Now you need a momo ahift knob🤘

    • @jolede029
      @jolede029  หลายเดือนก่อน +1

      I need more power. Coming out of the corners it is sluggish. A turbo would do wonders.

    • @skatedeath2186
      @skatedeath2186 หลายเดือนก่อน

      @@jolede029 or a twin kam KA from a 2000+ Nissan frontier would bolt right up to everything

  • @darrend4968
    @darrend4968 ปีที่แล้ว +2

    Great explanation on the steering wheel/spacer. Thank you!

    • @jolede029
      @jolede029  ปีที่แล้ว

      Thank you so very much. Thank you for watching.

  • @BoostedPastime
    @BoostedPastime ปีที่แล้ว +1

    Thank you for making this content!

    • @jolede029
      @jolede029  ปีที่แล้ว +1

      Thank you very much. I have a lot of fun shooting the videos. Thank you for watching.

  • @ruggledug
    @ruggledug ปีที่แล้ว +1

    Very interesting!

  • @psementalist
    @psementalist ปีที่แล้ว +1

    I'm getting ready to put a NRG steering wheel with detachable quick release on my 96 Ford Probe

    • @jolede029
      @jolede029  ปีที่แล้ว

      That is very cool. Remember to disconnect the battery if it has an airbag. You may need a resistor to go in its place so you don’t have a warning light on your dashboard. NRG sells them. Anyway, good luck and be safe. Take care.

  • @Damnsun720
    @Damnsun720 ปีที่แล้ว +2

    Hey boss by chance do you feel like the wheel is closer or farther from you compared to the stock wheel? Thank you

    • @jolede029
      @jolede029  ปีที่แล้ว

      Hello, well the wheel is not a deep wheel at all. So you see in one of the videos my there was not much room for my hands between the steering wheel and the turn signals and such. So when I added the spacer it is perfect and would say it is at the factory level. If I had to do it over I might look for a dished wheel, but my setup turned out really nice. And having the flatter wheel makes it more user friendly if I wanted to add a steering wheel buttons later. Thank you for watching.

    • @Damnsun720
      @Damnsun720 ปีที่แล้ว

      Sounds awesome! Personally I’m 5,5 so I don’t want the wheel too close but I’m going with the quick release for theft concerns. Love the set up btw🤘

  • @fantasticbrothers6332
    @fantasticbrothers6332 ปีที่แล้ว +2

    Hi i have njssan pathfinder 1992 is it same installment? And can u send me the link of the steering wheel i need to use that can fit my car

    • @jolede029
      @jolede029  ปีที่แล้ว +1

      Hello, thank you for watching. With the 92’ model in am not sure, I think it is the same but I think in 93 or 94 they did a slight redesign on the the upper column, it should work but make sure to do your research. I went on eBay to find mine. You could go on eBay or a salvage yard. If you see on buy it, don’t wait. Every year all of these parts get harder and harder to find. I hope this helps. So far it is a toss up between adding a tilt wheel or power steering that has changed my life the most. More videos very very soon. Thank you again for watching.

  • @mr.ls-s860
    @mr.ls-s860 ปีที่แล้ว +1

    Nice work. Where did you get the column?

    • @jolede029
      @jolede029  ปีที่แล้ว +1

      Hello, I got it off of eBay. It was from really nice truck that had tilt. I paid $250 with free shipping. It is so so nice. I am so very happy I put the tilt in there.

    • @mr.ls-s860
      @mr.ls-s860 ปีที่แล้ว

      Ok thanks

  • @humbertoreyes6510
    @humbertoreyes6510 10 หลายเดือนก่อน +1

    🎉

    • @jolede029
      @jolede029  10 หลายเดือนก่อน +1

      Thank you very much. Thank you for watching too.