MercRacing's New Heat Exchanger Design!
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- @mercracing updated their V3 Heat Exchangers with some cool new features. Watch the video to see what he did, and then you can buy your own via the links below. Don't forget to use coupon code "audic7owners" for a discount!
MercRacing 3.0T Heat Exchanger: bit.ly/3TI2yDM
MercRacing 4.0T Heat Exchanger: bit.ly/3TZwmgK
----------------------------------------------------------------------------------------------------------------------------------------
*NEW* Audi C7 Owners Apparel! Check it out: bit.ly/4croagi
Check out our Amazon Shop!: amzn.to/3hcFE8u
Amazon Wish List for Audi C7 Owners: amzn.to/3FpgxqR
----------------------------------------------------------------------------------------------------------------------------------------
Follow our other Socials!
Facebook: / audic7owners
Instagram: / audic7owners
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase (at no extra cost to you). Shopping through these links is a great way to support the channel so I can keep making helpful videos for you. Thanks!
Get your MercRacing Heat Exchanger via the links below! Don't forget to use coupon code "audic7owners" for a discount!
MercRacing 3.0T Heat Exchanger: bit.ly/3TI2yDM
MercRacing 4.0T Heat Exchanger: bit.ly/3TZwmgK
I like that!
Do you see any value to using the VAG brand coolent? (Or any other brand fluid for that matter) as opposed to the genetic G12++ or G13 from the auto parts stores?
I use ROWE products in my car. Their coolant works great
Major props to Mr Mercado and Cameron for making the C7 platform and community better
Love to see this. Great stuff from so many members in this community. Keep it up Cam!
You’re the reason I bought my 13 a6, love your content that much!
Ya done sold me on the dang car 😂
😂😂 They are great cars!
Doing great on the videos bro!! That was a leap! - Jonathan 2014 Audi A7
Sweettt update!!!
Thanks to Jose and the team at Merc Racing, glad I held out this long
BTW… any word about the LED daytime running light upgrades for the C7 A6?
Love it, Jose always making things better!
Absolutely love this. Thinking about slight platform differences and accommodating that in your products is innovation! Plus, it's black. I had to go with the APR heat exchanger here in New Zealand because it was easier to source. I would much rather have this MercRacing unit on the SQ5.
After just installing one of these on my B8.5 S4, the NUMBER 1 thing they need to do is make PROPER brackets for each specific car (like the S4). The HX is awesome, but the home-depot style brackets supplied to fit the high capacity unit inside a S4, are total S4IT! How hard would it be to provide a pre-made bracket to suit the actual car it's being advertised as "compatible" with? Having to modify them to fit the S4 was frustrating, and the end result (as was advised) is only just acceptable. Love the HX, HATE the included brackets.
ECS Tuning's HX has mounting brackets that use the existing crash bar bolt holes for the C7 4.0T. A no drilling install for Merc Racing's HX kits would make it the ultimate kit.
Ecs is also a massive company that can afford to make disfigured brackets for every single car model, and they likely stole the design from another company.
MercRacing is a one man company. I'd rather have the best performing hx VS the best performing brackets.
@@AudiC7Owners for the $10 it would cost, I want both. And I would be happy to pay for them.
It wouldn't be 10$ for Jose to have them made. There is a lot more that goes into it.
@@AudiC7Owners that's BS. I made them myself in my shed. It would be easy and cheap for him to knock up brackets to suit the car. No need to defend him, He makes an amazing product in the HX. But the bracket situation is s4it.
I want him to make a radiator for the 4.0. I've got all the upgrades and fianaly got it painted lasted week. Dealing with my headliner and a new windsheild now.
Me personally, I'd prefer to have a slightly less tidy install in order to use all 8 passes of the HX.
If you move the fitting to the opposite side, it basically becomes a 7-pass HX, not 8.
That's my next mod...👍
Nice video as all of yours are…. Learned so much from your DIYs. Any data on effectiveness of the HX? Before and after IATs?
Of this one in the video? No bc it isn't on the car yet. But I've been running the other 4.0t hx for a couple years and not many people have their iat's as controlled as I do very often. You can look up audi C7 owners on datazap and go through all my old logs to see my IAT's
Would you recommend the Merc racing heat exchanger over the CAP one.
Yes.
Should I also upgrade the coolant pump?
I'd assume this can work on a Q7 as well? The only one I know off made for the Q7 is the JHM heat exchanger. Curious to see what the price is on this.
Yes. This works on all 3.0t cars
So which heat exchanger do ypu recommend for an a7 c7.5 stage 2 ? Since they are two recommendations on the website ? The regular one or the hight capacity one ? Tks !
I always recommend the largest one you can get from mercracing
@@AudiC7Owners do I need to upgrade the water pump as well ? Or the stock one should be fine ? I’m just curious here. Thank you
Stock works well, but the upgraded one will be that much better at recovery and staying cooler overall.
@@AudiC7Owners got it ! Thank you for responding. ⭕️🫶🏻
Just ordered the 4.0t one last night for my B8.5 S5 (discount code came in clutch!). Doing this install as well as my intercooler cores at the same time so that way I only flush my coolant once.
How hard would you say it is to fit and install the 4.0t hx into the s5 and how is the bleeding process? I’m somewhat mechanically inclined but will be my first time flushing a coolant system/ taking off the supercharger and gonna dedicate a whole weekend to it.
Bleeding coolant and supercharger removal aren't that bad. First time I removed my supercharger it took about 40 mins to know where all the connectors and vacuum hoses were hidden. Second time I removed the supercharger, it took 15 minutes. Coolant drain is easy. Remove petcock from bottom of car to drain coolant. After no more comes out, close petcock and then remove coolant hoses that go to oil cooler. Let them drain and refit once nothing more comes out. Attach vacuum filler to coolant reservoir, pull vacuum, and once around 24 - 26psi stop pulling a vacuum and let it sit for about 10 minutes. As per Audi, if you don't lose more than 2.9psi over 10 minutes, then you don't have a leak and can open the valve to suck coolant in. After that, remove vacuum filler from reservoir and top off with your coolant jug until you're at max line.
It's easy... Just make sure you don't install the hx too low or your bumper won't go back on.
I have a video on bleeding the 3.0t coolant system
can you get a merc racing Intercooler for 2.0 a6 ?
No. These are water cooled hx's
Cameron or any body can help me please i have a engine light on and coded with P0456 thank you.
This could be as easy as a faulty gas cap seal
@@AudiC7Owners thank you sir
Sucks he has no customer service
That's 100% false. But people think he should answer their emails immediately. He's a one man operation, and 99% of the questions he is asked can be answered by a 10 second Google search. But mercracing stands behind their products without question.
so basically, instead of having to run that long tube around the back of the HX to the passenger side coolant hose (left), you can just connect the left hose to the new interchangeable opening in the bottom left and then connect pipe that runs from the top of the HX to the bottom right to the coolant line on the drivers side (right), right? lol.
Correct
@@AudiC7Owners sweet