52mm Store Run to see how BR6HS, and 32:1/93oct and semi-syth oil,do.?
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- It's been more than a week. Will it fire and do a 1-1/2 mile run smoothly?Ran here,and let cool.How will it do on 32:1 and the new BR6HS NGK gapped .030 while it re-warms,and rides ?I stretched the ride to 2 miles because I was So tired of being trapped by rain.Unfortunately they soaked the road with chlorinated water, so it was a bit slick,and muddy looking.At least it wasn't dusty sand with ripples...(washboard).
That's cool all the fresh water Springs 👽👍🏻 Thanks for the Ride -
Glad you enjoyed it
Beautiful day for a ride bry thanks for sharing I appreciate it it's raining here again lol ride safe brother
Looks like it handled that trip pretty well 👍😁
Thank you.It was a bit hairy on some of the wet dirt ;)
Purfict finally a video I can see the neiborood
Nice Ride and scenery
Let’s go thanks for the ride brother
It looks like you are in know hurry just cruising down the road love it
Thank you.It's nice to get out of town and traffic,even if it's a 1/2 mile away.
Thanks for the ripping to the store bud bike sounds good
TY.
BR6HS?! Why? Thanks for the ride.
I ordered B6HS,but got a pack of 6.BR6HS NGK, so I'm just using them. The R doesn't affect the running.I use that hot to burn clean.My plug is dark tan,which is perfect.
Sounds like you using the wrist pin bearing spacers yet?! Motor sound's like my avenger 85
That's still the 110/87.I wanted to work on the bike today,after mowing,but 90f and Muggy.Not 100% physically either.Will be ok.
@@bryduhbikeguy well let me know when you repair your YD100 them spacers fit by the way
Nice ride thanks👍
Thanks for the rip. Just what I need this morning 🌄 🎉🎉🎉
Enjoy!
Too noisy for me
Thanks for watching.I think it's too loud too.I usually am listening to books as I ride, through a blue tooth earbud,and since I was testing,I can hear the bike clearly.Yikes.
Im no expert...is regular Synthetic 2 stroke the norm and yeah I cant get mine to turn over so far P.S. the pull start does not seem to turn the 80cc I have over
I use synthetic-blend as it's cleaner into the air,as I don't see smoke.It lubes better without the deposits regular oil makes,from what I've seen in other's motors.I've never used a pull-start as the compression is good,and most starters are aluminum and plastic parts.Plus they stick out enough to need wider crank sets for pedaling.Take your plug out and see if the piston is hitting the head.Sometimes kits have a longer stroke rod,but the piton pin hole is too low. Good luck.
Found your channel
just subbed
Thanks Paul.