Awesome video! One technicality for you, the proper name for a duct detector key switch is remote test station. The system sensor remote test station begins with the letters RTS in the model number which stand for Remote Test Station.
@@SERSafety No. Below the smoke detector head marked "TEST PORT". You can demonstrate it in test 9 if you were to. Also, I would like to see these Mircom/Amseco/Potter alarms go off by themselves in test 9 too, and I've never seen you reset the panel with the keyswitch for the duct detector still in alarm before because I never knew you could do it.
For a basic starter alarm system I recommend these devices: Panel: Fire-Lite MS-2 Pull Station: Fire-Lite BG-12L Alarm: Gentex Commander 3 Smoke detector: System Sensor i3
What brand is the actual smoke detector inside the unit? I’m a fire alarm engineer in the UK and we use those smoke detectors everywhere - they are very popular here. (Manufactured and designed in the UK) I’m guessing it’s an Apollo Series 65? Just wondering if they rebrand it when it goes to the USA. Cheers!
Duct Detectors do cut off the air supply, of course. They actually do operate the fire alarm since what could have presented as light smoke could actually be a byproduct of a active working fire. Just like the alarm activated fire doors.. Duct Detectors work in the same capacity: to prevent the spread of smoke/fire by cutting off the oxygen supply needed for fire to grow.
csn you please make a video on how to put an alarm on a back box because i am getting an alarm shortly and i need to know how to mount an alarm onto a back box
Hard to tell on the vid, does the strobe on the duct detector key switch flash in sync with the other strobes? I wonder if there's any analogue in Simplex's line that has SmartSync compatibility...
As of now, I have zero plans to mount another panel to this side of my board. I am very happy with the set up I have currently. Thank you for the suggestion though.
recently a duct detector at my school gym activated. there was no fire but the detector malfunctioned probobly due to dust this is the second time this happened, that I know of
My recommendation would be to replace your entire smoke alarm unit. Based on your context it sounds like your smoke alarm is already very much unreliable.
Im from the UK, but i quite like your american fire alarm videos!👍👍👍👍
me too
same and the duct detector looks like an apollo xp95
Awesome video! One technicality for you, the proper name for a duct detector key switch is remote test station. The system sensor remote test station begins with the letters RTS in the model number which stand for Remote Test Station.
You are the reason we have a shortage of Bg Pull stations
in America XD
Great Duct Detector test I didn't even know there was even a thing called a duct detector Thank you for the demo and explanation on how it works :)
Your the reason I enjoy the sweet sound of code 3
There's also a feature on it where you can put a pin into the tiny hole on the bottom, around the red circle to test it.
If you are referring to the feature where you can spray canned smoke into the tiny hole, yes that's a feature.
@@SERSafety No. Below the smoke detector head marked "TEST PORT". You can demonstrate it in test 9 if you were to. Also, I would like to see these Mircom/Amseco/Potter alarms go off by themselves in test 9 too, and I've never seen you reset the panel with the keyswitch for the duct detector still in alarm before because I never knew you could do it.
Awesome setup. Today is my birthday and I'm getting a new alarm in my collection. Its a rare fci strobe
happy birthday bro
that's great happy birthday
anyone else hoping he put’s the voice evac panel in the new s.e.r?
the duct detector key switch and the alarm sound combined together makes a neat sound
Wow! Love that board and the new ser! Can’t wait for more!
Me too
The smoke detector in the duct detector is made by a English company called Apollo
I thought it was a Apollo detector
I like those duct dectectors
Ser I'm trying to get a alarm setup can you give me some ideas of what to get as a panel, pull station, and alarms?
For a basic starter alarm system I recommend these devices:
Panel: Fire-Lite MS-2
Pull Station: Fire-Lite BG-12L
Alarm: Gentex Commander 3
Smoke detector: System Sensor i3
Ok! Thanks.
Can you ship those i am a starter too
S.E.R. Safety Thanks that lists helps a lot!
Hey can you make a video on how to wire up a bg-12lx correctly I have a jbg-12lx and it didn't have a wiring diagram
I knew about duct detector s but I did not know how they work, Cool!
What brand is the actual smoke detector inside the unit? I’m a fire alarm engineer in the UK and we use those smoke detectors everywhere - they are very popular here. (Manufactured and designed in the UK)
I’m guessing it’s an Apollo Series 65? Just wondering if they rebrand it when it goes to the USA.
Cheers!
Nice video! I’m very impressed with that collection too; that would be an interesting video to see.
Usually (in my experience) duct detectors do not operate a fire alarm- they just shut down units/close dampers.
Duct Detectors do cut off the air supply, of course. They actually do operate the fire alarm since what could have presented as light smoke could actually be a byproduct of a active working fire. Just like the alarm activated fire doors.. Duct Detectors work in the same capacity: to prevent the spread of smoke/fire by cutting off the oxygen supply needed for fire to grow.
@@michaelomalley592 i've never seen them hooked onto a fire alarm in my area, just shut the unit off here. guess it depends on local regs too lol
@@michaelomalley592 my biggest problem with them is on burger king and mcdonald's a/c kitchen a/c units... the grills shut them down lol
csn you please make a video on how to put an alarm on a back box because i am getting an alarm shortly and i need to know how to mount an alarm onto a back box
I like the 10UD for loud its cool I also liked all the comments
Hard to tell on the vid, does the strobe on the duct detector key switch flash in sync with the other strobes? I wonder if there's any analogue in Simplex's line that has SmartSync compatibility...
I actually had a trauma with these fire alarms so I’m surprised I’m watching your vids!
0:14 You have a lot of stuff!
Unless I am living under a rock and you have already made one, you should make a collection video
Nice! Also just as an idea, you should make it so those duct pipes come out the top that way you could mount another panel if you ever wanted too.
As of now, I have zero plans to mount another panel to this side of my board. I am very happy with the set up I have currently. Thank you for the suggestion though.
:)
😘
Wow a new s.e.r. Good job when this was recorded the day before my birthday
Great video!
Wow, it so cool I really like it
Will a duck detector work on a security system
Do you know where i can get a unimode 10ud for cheap?
How did you get all alarms?
Great Video 😀👍👍
i was watching this in low volume cause i thought 10UD stood for LOUD XD
Nice man!
What are the fire alarms called
the smoke detector inside the little duct detector box is a British smoke detector
Looks cool!
I'm gonna laugh if we're to alert the Dispatcher about Alarms going off. 😉😉😉😉😉😉😂
0:49 they have those kind of smoke detectors on the trains in Israel where I live without the plastic covering tho
(Edit: lol this was old)
recently a duct detector at my school gym activated. there was no fire but the detector malfunctioned probobly due to dust this is the second time this happened, that I know of
The captions said deaf detector
Thats the ploblem
3:36 it sounded like a hilo.
Bro the duct detector looks like a Whole Makeshift C4 jeez...
10UD means LOUD btw
Can you answer question for me I have a smoke detector that keeps eating through it's battery and goes off for no reason please help
House I just got it recently
Jeff Grant just buy a new smoke alarm
@@FireAlarmDude5967 okay thanks for the help
My recommendation would be to replace your entire smoke alarm unit. Based on your context it sounds like your smoke alarm is already very much unreliable.
Do a vid showing the bells
That duct detector sensor looks like the plain British alarmfast smoke detector
What is the outro song?
I love your videos I want to see a 2901 light plate with a 2901 horn
What is this smoke is showing low battery
I have a smoke Alarm it's really cool
This is gonna be me in a few years
Vamo you have apolo detector
I saw something like this on the ceiling in my school
Combined With Those Two Alarms and The Panel Beeps It sounds like the squid Game Theme
That's a lot of high frequency beeps
Duck detector. If ducks are in building the duck alarms are active
Hi what is up and I'love you and Nice you vidéo Good job
(only british fire alarm people will understand) that duct detector looks like an apollo xp95
It has a uk smoke detector
💕💕💕
❤❤
Does the duct detector detect ducks 🦆?? 😂😂😂😂😂😂
The only way I could 0:17
😎
Mircom select-a-horns
So we won’t have fun with these
Duct or Duck
I never no Evac
🥰😍🤩😍🤩😘
fire alarm
Sounds like music
0:00
8 ball!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I hate fire alarms
These are so annoying
What is the it the duct Detector for is it for when ducks walk by
🦢