Setting up onboard ballistic profiles on Zulus LRF , DMT.

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ธ.ค. 2024

ความคิดเห็น •

  • @philipasbury9173
    @philipasbury9173 4 หลายเดือนก่อน +6

    Morning Charlie, you’re putting together a super series of Zulus set videos.
    Straight forward and slow enough for less technical people like myself to follow.
    👍

    • @cjoutdoors8264
      @cjoutdoors8264  4 หลายเดือนก่อน

      @@philipasbury9173 morning Philip,thanks for that 🙂 good to know the speed of the video is ok, hopefully a speed to be able to follow along as it vid plays.

    • @philipasbury9173
      @philipasbury9173 4 หลายเดือนก่อน +2

      @@cjoutdoors8264 definitely, as I mentioned a few days ago I bought a 312, and followed your Zero set up video, worked great as I could pause each step .
      I still need the ballistic figures for my rifle ( BSA R12 Fac .22) just need to get it over a chronograph.
      I’ve watched one or two other setup videos and quite a few miss areas out .
      You literally show it step by step which is exactly what I need, not being technically minded.
      Only got back into air rifle shooting, mainly pest control around the farm since last September, so gradually upgrading my kit as budget allows.
      Many thanks
      Phil

    • @cjoutdoors8264
      @cjoutdoors8264  4 หลายเดือนก่อน +1

      @@philipasbury9173 👍. I need it step by step :) A R12 fac is a nice bit of kit 👍
      this little hobby can be a little addictive 😅 and expensive 😐

    • @tomh4980
      @tomh4980 4 หลายเดือนก่อน +2

      that is one of the best video I've seen and a great help to me

    • @cjoutdoors8264
      @cjoutdoors8264  4 หลายเดือนก่อน

      @@tomh4980 hi,thanks for saying that 🙂 glad it was of use 👍

  • @Slav67
    @Slav67 4 หลายเดือนก่อน +1

    Do you know if onboard ballistics account for inclined declined shots? If Holdover changes in case of inclined or declined shots.

    • @cjoutdoors8264
      @cjoutdoors8264  4 หลายเดือนก่อน +2

      Hi, yes I believe it does ,I've not tested it myself

  • @tomh4980
    @tomh4980 4 หลายเดือนก่อน

    brilliant

  • @Mark-wx1ho
    @Mark-wx1ho 7 วันที่ผ่านมา

    What is the difference between Ballistic Calculation and Ballistic Table? How did you change the Table settings from A, B etc? When I sync my ballistic Table, it does not show in the table settings. It does show in the settings page though. I am mega confused.

    • @cjoutdoors8264
      @cjoutdoors8264  6 วันที่ผ่านมา +1

      Hi, Ballistic calculator ,you can enter the values in the scope , the scope makes the calculations for aim points , Ballistic table ,you enter the values in the phone the app does the calculations ,then you add them to the scope, or at least that how I see it !
      to change Letter A ,B look at 35 seconds in on the vid,

  • @shaunjenkins763
    @shaunjenkins763 2 หลายเดือนก่อน

    How do I measure the scope height I've just got one trying to get it set up

    • @cjoutdoors8264
      @cjoutdoors8264  2 หลายเดือนก่อน +1

      @@shaunjenkins763 Hi, measure from centre of scope lens to centre of barrel , if you have a look at my vids there is a video on doing it 👍

    • @shaunjenkins763
      @shaunjenkins763 2 หลายเดือนก่อน

      @cjoutdoors8264 my rifle is a daystate pulsar

    • @shaunjenkins763
      @shaunjenkins763 2 หลายเดือนก่อน

      @cjoutdoors8264 mine came with the 20 moa mount and I have used dovetail to picatinny clip on mounts to mount the unit

    • @cjoutdoors8264
      @cjoutdoors8264  2 หลายเดือนก่อน

      @@shaunjenkins763 nice rifle 👍,