Great video .Googled allis chalmers d17 service manual pdf and clicked on linkAlis-chambers-service manual ac-s- d17 . It listed a bunch uf torque specs . It called for 70 - 75 ft lbs for lift arm asmy to rear transmission. Looking foward to next video.
The more I watch the more impressed I am with your wide range of mechanical and land management skills. Very impressive. I have a whole new respect for the work ethic, knowledge and skills a successful farmer needs. 👍🏼😁
This is so cool! Amazing that you know how to do this. Normally I have no interest in engines but restoring an antique tractor has really held my interest. Thank you Evan!
Rural man here. I'm very excited about the re-build of this tractor, although I understand totally the time it's taken. I doubt anyone who lives in a rural area and does DIY, doesn't take time to do projects. They pile up. Some are simple, some complex. It's fun though, which is what matters.
Funny story I need to share watching this…I grew up on a farm and was a real Tom boy helping with everything outside from the animals to driving tractor/harvesting. One time I was helping Dad tear the front of a tractor off and I saw something in the front of the tractor housing, I picked it out and asked ‘What’s this?’ He said a dead mouse, I threw it so hard it stuck up on a rafter in the shed. Watching you put this together reminded me of that and I chuckled like my Dad did after that joke. Great job on restoring the tractor, keep up the good work
Evan, I understand you wanting to paint individual assemblies, but all tractors, dozers and machines were painted once assembled. (and the paint put on thick helped to seal from leaks!)
This grandma of age 89 enjoyed every moment of this!!! You planned it out well without us knowing , but knowing you Evan there isn't a thing I have really seen you screw up on except that side yard of your new big work shop...remember the day you knocked the drain post down?? We remember...and wont forget it!! Great POST!
So pleased to see your post. As a 83 yr old Grammy I enjoy watching this fine couple as they together tackle making their dream life take flight. And they are young enuf to have many many more quality years enjoying life.
I bought my d17 16 years ago. The lift arms wouldn’t hold and would over fill the transmission when using the 3pt. I never tore it apart to fix until I ran across your videos. Pulled it into the shop today and started. Thanks for the great videos
Looking good! That original bearing is a 1207 c/3 single roller bearing. The numbers indicate the size the letter indicated what type of bearing. And for installation you can heat the bearing in the oven. 230 degrees. If it gets hotter than around 250 it will start to change the metallurgy.
Nice job Evan, really enjoyed watching the assembly process. Nice to have a facility/shop to do that in, I don't have one and I have a steering arm on my tractor to fix. Oh well, it just something we have to deal with. Thanks for sharing have a great remainder of the week.
Fantastic cometography and narration. Crazy to think you are doing all this work and filming and editing by yourself. I know there is a lot of time in doing all that, let alone just one of the three. Great job Evan!
On that lock ring pliers, tap the center pin with a hammer and punch, that should tighten it up so it's not loose, start out easy and check as you go so it doesn't get too tight. It's nice to see the Allis going back together.
From my experience working in hydraulics for 14 years on fighter aircraft, you should have oiled the seal in that hydraulic actuator and soaked the backup rings in hydraulic oil before assembling the actuator. Also some oil on the cylinder wall to allow it to slide easily without binding up. I would have tested it before installing to make sure it's operating without leaking. Chances are that the seal rolled during assembly since everything was dry when assembling. Let's hope I'm wrong and it's working good.
Just a tip...if you have bare metal sitting around your shop waiting for assembly/paint, Shoot it with some self etch primer to prevent rust in the short term. You can prime right over it when ready.
I would have liked to see you noodle thru that cobblers weldment repair of the casting break. I probably know why you didn't (let sleeping dogs lie). But man - that is a mess. It would have made good content. Consider for the future. Us old guys enjoy watching the creative, elegant solutions you young fellas come up with. 😊
a pair of long bolts with the heads cut off and pointed would make putting the parts back together, you might just double up the pto seal looks like lots of room, it always feels good to get a project back together!! have fun from oklahoma
The different approaches to accomplish the same end result in engineering is always fascinating. That Allis I'd a marvel of engineering. Why the approach taken is likely lost in history,, but the end result is that it works and it works well. The only negative I ever heard about Allis-Chalmers was that they were had so much torque and set so high that they were apt to flip over backwards if one wasn't careful. I've used Allis tractors, but never had an issue. They are marvelous machines. Good job, Evan.
The only time I've seen an Allis flip over backward was when a hired hand tried pack a silage pile that he'd been told not to. He jumped clear, crushed the tractor. Don't know if it was a WC, WD, or WD-45. I think we got the D-15 to replace it.
You can rent a skid steer wood splitter attachment and it will crush rims like butter then all you have to do is throw them in a metal recycling bin and you might can get a wood splitter attachment for a tractor you can do hundreds of rims in a day with little work
Happy to see the Allis-Chalmers coming back together. I grew up driving Allis-Chalmers from that era, altho they were turnover tractors (aka tricycles). And I am even happier to see that yours is NOT a turnover tractor! And when you are done, maybe you will inspire me to fix the hydraulic hemorrhage on my Kubota.
Good video ,a little tip you may or may not want to use . Wrap the splined with one layer of electrical tape so it doesn’t damage the o ring. Works well.
Another great video Evan! love watching any repairs to tractors. and ow they work out. like so many others have posted here I would like to see you take the play list of the repairs. and make one solid video of it pieced together? food for thought. thanks again for sharing. ECF
Nice job! It’s good to see the venerable AC D-17 series I going back together. Seeing the instrument panel exposed lets me see the D series roots in our WD-45. Definitely the same family, or at least the same engineers. 😏
I gotta give you credit, I’m not sure I’d have invested this much time and money into this tractor but it seems to be working out for you. For those press fit bearings in the future but them in the freezer for at least a couple of hours prior to installation. Even if they only shrink a half a thou that should be enough to make them slide on easier.
You make it look so easy. That looks like a series lll..by the decals & muffler, it's oblong, right?I have a series ll, it has the round muffler. I was thinking series lll and series lV had the white decals. Anyway, they're good old tractors I grew up with mine. Grandpa had it, then my dad, now me.
How nice of some subscribers to take note of what tools will be of help and then send them to you. With the last seal you installed being narrower than the original does that mean the bearing could move backward and be damaged?
It looks like your new PTO seal was a CR seal and your old one was a National seal.
Great video .Googled allis chalmers d17 service manual pdf and clicked on linkAlis-chambers-service manual ac-s- d17 . It listed a bunch uf torque specs . It called for 70 - 75 ft lbs for lift arm asmy to rear transmission. Looking foward to next video.
Thanks for sharing with us Evan, glad you are in the back together mode with Allis. We will be watching closely. Stay safe . Fred.
The more I watch the more impressed I am with your wide range of mechanical and land management skills. Very impressive. I have a whole new respect for the work ethic, knowledge and skills a successful farmer needs. 👍🏼😁
One of my favorite episodes, that's a really cool tractor.
This is so cool! Amazing that you know how to do this. Normally I have no interest in engines but restoring an antique tractor has really held my interest. Thank you Evan!
Rural man here. I'm very excited about the re-build of this tractor, although I understand totally the time it's taken. I doubt anyone who lives in a rural area and does DIY, doesn't take time to do projects. They pile up. Some are simple, some complex. It's fun though, which is what matters.
Funny story I need to share watching this…I grew up on a farm and was a real Tom boy helping with everything outside from the animals to driving tractor/harvesting. One time I was helping Dad tear the front of a tractor off and I saw something in the front of the tractor housing, I picked it out and asked ‘What’s this?’ He said a dead mouse, I threw it so hard it stuck up on a rafter in the shed.
Watching you put this together reminded me of that and I chuckled like my Dad did after that joke. Great job on restoring the tractor, keep up the good work
His wife Rebecca can relate to that story! 😂
You’re at the top of my watchlist with this rebuild! This definitely needs to be in a playlist because I would watch it again in its entirety
I’m happy for you to finally begin to put tractor puzzle back together, making old stuff new again! 👍
God bless 🙏🏼🇺🇸
Evan, I understand you wanting to paint individual assemblies, but all tractors, dozers and machines were painted once assembled. (and the paint put on thick helped to seal from leaks!)
Really interesting watching you with this project Evan , your so methodical the way you go about fixing things .
Great to see it going back together
This grandma of age 89 enjoyed every moment of this!!! You planned it out well without us knowing , but knowing you Evan there isn't a thing I have really seen you screw up on except that side yard of your new big work shop...remember the day you knocked the drain post down?? We remember...and wont forget it!! Great POST!
So pleased to see your post. As a 83 yr old Grammy I enjoy watching this fine couple as they together tackle making their dream life take flight. And they are young enuf to have many many more quality years enjoying life.
Wow!! Evan!! I want to be you when I grow up!!
Finally, I bet your happy to get that done. Can’t wait to see it back out in the field. 😊
FINALLY , OLD TRACTOR VIDEOS ! 🎉
I bought my d17 16 years ago. The lift arms wouldn’t hold and would over fill the transmission when using the 3pt. I never tore it apart to fix until I ran across your videos. Pulled it into the shop today and started. Thanks for the great videos
Fascinating to watch for some crazy reason it is interesting to watch this being cleaned up and put back together. Good luck
Looking good! That original bearing is a 1207 c/3 single roller bearing. The numbers indicate the size the letter indicated what type of bearing. And for installation you can heat the bearing in the oven. 230 degrees. If it gets hotter than around 250 it will start to change the metallurgy.
Awesome job Evan way to go man so cool rebuilding the old tractor
You're a very smart talented man to put that all back together.
Enjoying your video Evan on rebuilding the Ac D17 tractor .
Looking good! Those pliers made it look so much easier! Proper tool for the job! 👍
You are quite the one man band Evan. Seems there are a lot of old tractor enthusiasts loving this series so its good you have its own playlist.
Nice job Evan, really enjoyed watching the assembly process. Nice to have a facility/shop to do that in, I don't have one and I have a steering arm on my tractor to fix. Oh well, it just something we have to deal with. Thanks for sharing have a great remainder of the week.
Can wait until it finished great video
Contributor David is a Rock Star!!
...LOOKS GREAT, NICE WORK, KEEP WELL AND SAFE...
I racked up some good hours on a D17 and a D15 in the 80s. Spunky little tractors for sure.
Fantastic cometography and narration. Crazy to think you are doing all this work and filming and editing by yourself. I know there is a lot of time in doing all that, let alone just one of the three. Great job Evan!
You seem to be a very accomplished mechanic or spend an inordinate amount of time researching the equipment your working on!!
Exactly! I don’t know which method Evan is using, but either way, this is really impressive!
On that lock ring pliers, tap the center pin with a hammer and punch, that should tighten it up so it's not loose, start out easy and check as you go so it doesn't get too tight.
It's nice to see the Allis going back together.
Ty nice job kudoes 👍🏆🏆👴🐕🚜😎
From my experience working in hydraulics for 14 years on fighter aircraft, you should have oiled the seal in that hydraulic actuator and soaked the backup rings in hydraulic oil before assembling the actuator. Also some oil on the cylinder wall to allow it to slide easily without binding up. I would have tested it before installing to make sure it's operating without leaking. Chances are that the seal rolled during assembly since everything was dry when assembling. Let's hope I'm wrong and it's working good.
Your videos are like fresh air after a long day of work.
Just a tip...if you have bare metal sitting around your shop waiting for assembly/paint, Shoot it with some self etch primer to prevent rust in the short term. You can prime right over it when ready.
Hi Evan, It is good to see you restore the tractor. Good vlog.
Aaron, On page 85 of the D-17 shop manual in the last paragraft it states that the 1/2" capscrews are to be torqued to 70 - 75 foot pounds. Tom.
Good evening Evan,looking great,From Steve
I would have liked to see you noodle thru that cobblers weldment repair of the casting break. I probably know why you didn't (let sleeping dogs lie). But man - that is a mess. It would have made good content. Consider for the future. Us old guys enjoy watching the creative, elegant solutions you young fellas come up with. 😊
👍👍👍👍👍👌great job and detail on the reassembly!!!
Hay evan im a new subscriber and just want to say that i enjoy your content thanks for sharing can't wait to see your tractor in action
Hay Evan cool to se you restoring your old tractor can't wait to see it in action thanks for sharing
a pair of long bolts with the heads cut off and pointed would make putting the parts back together, you might just double up the pto seal looks like lots of room, it always feels good to get a project back together!! have fun from oklahoma
Looks good Evan will be nice see it running. Have a good day.
I have been looking forward to this series, jb
Great job Evan everything looks great!
As always one of the best videos going.
Very Good Work!
Good Job...Thank You for detailing all you do...really enjoyed your video...Take care and see you again soon !
The different approaches to accomplish the same end result in engineering is always fascinating. That Allis I'd a marvel of engineering. Why the approach taken is likely lost in history,, but the end result is that it works and it works well. The only negative I ever heard about Allis-Chalmers was that they were had so much torque and set so high that they were apt to flip over backwards if one wasn't careful. I've used Allis tractors, but never had an issue. They are marvelous machines. Good job, Evan.
The only time I've seen an Allis flip over backward was when a hired hand tried pack a silage pile that he'd been told not to. He jumped clear, crushed the tractor. Don't know if it was a WC, WD, or WD-45. I think we got the D-15 to replace it.
Keep working at it. 👍🏼👍🏼
love your vids
Great video
It’s really getting there. Nice old tractoe😊😊😊
Good job
Looking good. Can't wait to see move out on it's Owen power.
Hi.... Evan, thank you for showing your video homestead 👋 bye 👋 bye 👋 bye 👋 👕🐔🐓🐣🐥🦃🐕🐈🐐🐄🐖🐝🌱🌺🌹🌻🌼🌸🌷🏡🎥👍👍👍
on my D17 l just used two of the skinny seals in!!! worked just fine!!! l will be watchin!!!!
Wow so interesting.
Looking good looking good. Keep up the good work
Fascinating!
We appreciate your details in this project. Thanks for sharing it with us.
Really enjoying your channel
Making progress
Everything looks okay, you might want to lube your seals as well as your shaft when reinstalling . It will go together easily!
Nice to see your able to make some progress on the AC, I am sure it feels good. And when it goes back together without a hitch.
Evan , thank you for the info on the pole barn , electrical , appreciate it ! You are doing a nice job on the tractor ! Enjoy
Great build video Evan! Thanks for sharing!
You made that look way too easy.😊
Hello Evan
Haha made in Germany. Great to see your unconventional way.
Greetings from Germany
You can rent a skid steer wood splitter attachment and it will crush rims like butter then all you have to do is throw them in a metal recycling bin and you might can get a wood splitter attachment for a tractor you can do hundreds of rims in a day with little work
Happy to see the Allis-Chalmers coming back together. I grew up driving Allis-Chalmers from that era, altho they were turnover tractors (aka tricycles). And I am even happier to see that yours is NOT a turnover tractor! And when you are done, maybe you will inspire me to fix the hydraulic hemorrhage on my Kubota.
Wasn't easy but you got it done. If there is room in the PTO seal flange you could out another in.
I was going to tell him the same thing
Fixing things and doing stuff on CVA.👍
I'm really impressed how clean and organized your work space is. No wonder you are successful.
Once you have that tractor finished you should put the case in the shop and restore it as well
It needs some love too. 🚜
Great job!!
You should release all stress from the torque wrench & set it back to zero after using.Always store it at zero.
I think its safe to say this is something I never want to have to do.
An induction heater would be nice in your tool kit for bearings.
Good video ,a little tip you may or may not want to use . Wrap the splined with one layer of electrical tape so it doesn’t damage the o ring. Works well.
Nice job
so seeing the shorter seal. lots of times I see people using double seals.
Hi, Evan! You continue to amaze me. Love your videos.
Another great video Evan! love watching any repairs to tractors. and ow they work out. like so many others have posted here I would like to see you take the play list of the repairs. and make one solid video of it pieced together? food for thought. thanks again for sharing. ECF
Nice job! It’s good to see the venerable AC D-17 series I going back together. Seeing the instrument panel exposed lets me see the D series roots in our WD-45. Definitely the same family, or at least the same engineers. 😏
yes, it has a lot of the same parts as the WD-45
I gotta give you credit, I’m not sure I’d have invested this much time and money into this tractor but it seems to be working out for you. For those press fit bearings in the future but them in the freezer for at least a couple of hours prior to installation. Even if they only shrink a half a thou that should be enough to make them slide on easier.
Freeze the shaft or heat up the bearing sometimes u have to do both
Good vid Evan. Enjoy tractor work. I like that Allis D17. Go a little easier on that permatex. To much is not good
Nice vid
Off the subject but I saw that if u put 2x4 fence over ur hay feeder they can’t pull so much out and waste it. Might save u some clean up time.
Great job Evan. You can fix anything. Love watching your videos.🚜👍👏
You make it look so easy. That looks like a series lll..by the decals & muffler, it's oblong, right?I have a series ll, it has the round muffler. I was thinking series lll and series lV had the white decals. Anyway, they're good old tractors I grew up with mine. Grandpa had it, then my dad, now me.
It is a series one. It has the wrong decals on it. And the hood has been cut open to fit the oval muffler.
At 7:53 what is the rack on your wall that has the wood on it? Is there a video about it I could watch?
th-cam.com/video/4wXCWp4nzz8/w-d-xo.html
If there’s room you can double stack those seals
I was wondering if a lot of those pieces going together should have had a little grease rubbed on them, like the Bearings?
How nice of some subscribers to take note of what tools will be of help and then send them to you. With the last seal you installed being narrower than the original does that mean the bearing could move backward and be damaged?
The original seal was a different style both will work
Where did you learn all of this? I'm impressed!