Mandalorian - Razor Crest print on prusa

STL- fab365.net/ite...
At the great request of the makers, I designed the Razor Crest, which appears in the Star Wars TV series The Mandalorian, as a print-in-place for 3D printing.
I tried to reproduce almost all the moving parts.
The air brake of the engine, the hangar at the back, and the door on the side embody the movement.
However, some were expressed in a detachable way. Telescopic gate parts or landing gear on the side are implemented as removable.
The process of printing and creating is very simple, but there are a few caveats.
1. It is recommended that rear doors and windows be printed using brim.
2. Window parts can be confusing, so try to match them before attaching them.
3. It is convenient to put the back door first.
We are designing a display stand that can store these extra parts separately. Please look forward to this display stand!
There are many production requests from you, but due to circumstances, we cannot produce all of them. However, Fab365 always listens to your opinions and requests, and if circumstances allow, we are trying to respond to your requests.
We hope you enjoy printing this item designed at your request!
1 : 100 scale
Largest part in printing, size = X 96mm, Y 86mm, Z 85mm, After full assembly size= X 208mm, Y 280mm, Z 103mm
Total Build Time : 61h 37m / Plastic Weight : 308g

[@chaymberr_crafts]

I requested this back then and never got to print it, until Today! I made Short of it. Absolutely satisfying to put together!👊😍

[@fab365_official]

Please enjoy and make print review~ fab365.net/reviews

[@davethepak]

Absolutely amazing mechanical design - compare this to kits that are either incredibly simplistic in detail, or have dozens and dozens of fiddly parts.
amazing.
thanks for sharing.

[@DeltaXK144]

Very nice, I love the details

[@nhahtrebor91]

It looks so smooth! I don't know if I can get that with my printer. Not yet atleast.

[@fab365_official]

Please check this design page link.
I always write down the information required for slice setting under the design description of every design page.
Thank you~

[@TheSirBlackbird]

Impressionnant ce système de fixation entre les pièces, superbe boulot, si vous faites la game des vaisseaux de Star Citizen, vous allez avoir un succès fou ;)

[@LanceChisenhall]

Incredible. Do you have setting guide for Bambu X1 Carbon?

[@fab365_official]

We don't have Bambu 3D printer~

[@dankron_]

That's incredible! What colour filament is that? I always wanted a model grey like that, and can never find it!

[@fab365_official]

Thanks for watching. We used light grey PLA.

[@hankypankymoody]

Hello there! Fantastic job, congratulatoins! Just one question: what kind of glue are you using? Simple nail varnish? Thank you!

[@Doriann88]

What is your layer height this came out amazing.

[@faintandfuzzies]

Very nice! What CA glue are you using?

[@fab365_official]

I use this glue. www.shop.fab365.net/loctite Thanks~

[@cojeperiodistaK5NLN]

How do you give the details of the metal joint and the lines?

[@davidocanhajuniorocanha3081]

Show de bola 🎉

[@user-og5ql3po3d]

👍👍👍💕💕💕Like

[@fab365_official]

😁😁😁

[@0svold]

Its PVA, right? What glue do you use please, cyanoacrylate?

[@fab365_official]

I use PLA filament. and I use this glue. www.shop.fab365.net/loctite

[@RATSBLATS]

It looks like you printed this smaller on the Prusa and larger on the Ender?

[@Stoppi-nz5ol]

Ist this Filament or Resin?

[@fab365_official]

PLA Filaments~

[@Stoppi-nz5ol]

Where have you the Data from?

[@F4Fblack]

😂 fab365 on each part of the model. Did I missed something on the show, or haves Disney/Lucas Films a sponsorship with u?, sorry copyright is okay but u must have a very low ego if u need to place it everywhere u can and that’s for payed model? on a free model understandable , but not for payed models that’s makes the model ugly 🤦🏻‍♂️