Thank you for taking the time to film and document this. I have a 325i with an m52b28 which I plan to turbocharge. I've been researching options for the inevitable but haven't come across this solution before. Off to watch your other videos 😊 👍
@@jerseytim100 I definitely am :-) Was just on the front five stud conversion video. I've been gathering parts for years and bought a similar kit from epytec in Germany I think. If you can say... which one did you have to return? Still haven't got round to fitting it yet, was planning on using z4 hubs for the rears but now I'll probably follow in your footsteps.
@@supadupa3 i can't remember the name of the one i had to return, i used irp in the end which were great, the callipers needed a little grinding to fit the brackets but still working well
@jerseytim100 hello, great find!! I have an e30 325i with a 210mm diff (635csi), I did not quite understand the assembly you are doing, you need e24 635csi bar with the homocinétique joints of the e32 735i the inner hubs also e24 635csi and e32 735i outer hubs is that right? thanks in advance 😃
Thank you for taking the time to film and document this.
I have a 325i with an m52b28 which I plan to turbocharge.
I've been researching options for the inevitable but haven't come across this solution before.
Off to watch your other videos 😊 👍
Thanks for watching, i hope you enjoy the other videos
@@jerseytim100 I definitely am :-)
Was just on the front five stud conversion video.
I've been gathering parts for years and bought a similar kit from epytec in Germany I think. If you can say... which one did you have to return?
Still haven't got round to fitting it yet, was planning on using z4 hubs for the rears but now I'll probably follow in your footsteps.
@@supadupa3 i can't remember the name of the one i had to return, i used irp in the end which were great, the callipers needed a little grinding to fit the brackets but still working well
@jerseytim100 hello, great find!! I have an e30 325i with a 210mm diff (635csi), I did not quite understand the assembly you are doing, you need e24 635csi bar with the homocinétique joints of the e32 735i the inner hubs also e24 635csi and e32 735i outer hubs is that right? thanks in advance 😃
It has taken a long time but I am currently converting the rear arms so the shafts will fit. I will post a video once it is on the car.
do you have the part number for the e34 axels? trying to find them, theres a company that makes output flange's so they can be mated to 188 diff
Can I upgrade the 320i rear axle to 325i one?
Yes it should fit fine. Make sure the cups in the diff are the right size for the shafts
So does the stub axle fit the e30 std bearing ?
Yes it does but you need a 5mm shim as the e30 bearing is narrower
Did you have to modify the E36 M3 output flanges to fit them into the E30 diff or do they fit directly?
They fit directly but they have to be from an e36 3.0 m3 not the 3.2
@@jerseytim100 Great. Thank you for the information, Tim.
Does this affect geometry at all? As it seems like they are a bit shorter
They work out the same length once the hub is fitted
@@jerseytim100 have you installed them yet? want to see how u over came the ebrake issues