I don't know why, but I have the Expert II LX in the 24 inch edition - and my USB port got broken the same way! Now I am looking for an alternative and I think that COM-to-USB adapter option is the perfect way! Does it take more time to get recognized by the cutter? Or can't you feel any time difference between Serial Port and USB? Thank you!
@@synergy17llc Do you have an idea what it could be if the cutter starts cutting bulbs inside of the corners of my vector graphics? Lines aren't straight anymore, it looks like curves inside the corners?!
@@AnotherKentPaul it could be the offset of the blade. If the offset doesn’t match the manufacturer’s specifications, it will either be sharp or rounded.
Hi, I found the driver and followed your instructions. But instead of working when I press test cutter it just crashes Easy cut? Have you any idea? What I could try next? I've already removed and reinstalled it.
Who makes easy cut? I’m not familiar with that software, but after installing the drivers, for the Serial to USB cable, did you go into easy cut and update the settings to the new com port?
@@synergy17llc yes I did. I placed in the boxes. PE, USB and it said, serial port usb com 3. It didn't work. And the software seems to be crashing. ( It has to be forced to close. Did I pick the wrong driver to install? Thanks for your help
I have a US CUTTER MH 721 and I bought a USB to RS-232 Serial Adapter but it’s still not cutting. I have the VinylMaster software . Any other suggestions
I don't have that cutter. Maybe it's a setting or the baud rate you need to configure to send the data to the cutter. Some serial port devices have a baud rate of 115200. Check the spec of the cutter.
Can you recommend a parallel to usb converter for a GCC panther grc-76S that works with windows 10? The cord I have doesn’t work. When I plug it in the device manager does not refresh like yours does. It only says standard serial over bluetooth link (com5) and (com 4) im so lost. Any help would be appreciated.
Hi Tammy, which model is that? I can't find the Panther GRC-76S. Is that an older model? Does that model only have a Parallel port and not a serial port?
@@synergy17llc i actually got it to work after ordering a usb to serial instead of parallel. I hit cut and the plotter starts running but then stops and the screen reads communication error.
@@tammycelli7011 AWESOME!!! If you ever need help, it's best to just call or email me. Must faster than TH-cam comments. I only see them pop up once in a while.
![[Part 1] ทารกน้อยถูกทิ้ง👶 หญิงชราเก็บขวดขายเลี้ยงดูเขาจนโต #โลกการละคร](http://i.ytimg.com/vi/nPTDvFCExks/mqdefault.jpg)
![MV วิถีชีวิตใต้ - ผา อัยย๊ะ [Official MV HD]](http://i.ytimg.com/vi/nODlkOUu9B0/mqdefault.jpg)
I know this video is 8 years old but thanks so much!!! you really helping me for that change the port setting part
Glad it helped!
Thank you. This video really helped
Thank You!!!
Thank u very much 🙏🏼👍🏻💯
I don't know why, but I have the Expert II LX in the 24 inch edition - and my USB port got broken the same way! Now I am looking for an alternative and I think that COM-to-USB adapter option is the perfect way! Does it take more time to get recognized by the cutter? Or can't you feel any time difference between Serial Port and USB? Thank you!
It recognizes it immediately, but not sure if jobs take any longer to send via serial vs usb.
@@synergy17llc Do you have an idea what it could be if the cutter starts cutting bulbs inside of the corners of my vector graphics? Lines aren't straight anymore, it looks like curves inside the corners?!
@@AnotherKentPaul it could be the offset of the blade. If the offset doesn’t match the manufacturer’s specifications, it will either be sharp or rounded.
Hi, I found the driver and followed your instructions. But instead of working when I press test cutter it just crashes Easy cut? Have you any idea? What I could try next? I've already removed and reinstalled it.
Who makes easy cut? I’m not familiar with that software, but after installing the drivers, for the Serial to USB cable, did you go into easy cut and update the settings to the new com port?
@@synergy17llc yes I did. I placed in the boxes. PE, USB and it said, serial port usb com 3. It didn't work. And the software seems to be crashing. ( It has to be forced to close. Did I pick the wrong driver to install? Thanks for your help
@@synergy17llc Also easy cut is similar to sure cuts alot. I might try different software. It worked fine at Christmas this is a new prob to me.
@@haleybel did you install the gcc drivers or the usb serial drivers?
I have a US CUTTER MH 721 and I bought a USB to RS-232 Serial Adapter but it’s still not cutting. I have the VinylMaster software . Any other suggestions
I don't have that cutter. Maybe it's a setting or the baud rate you need to configure to send the data to the cutter. Some serial port devices have a baud rate of 115200. Check the spec of the cutter.
Dude I have the same model and the USB port broke . Did you try the fix from the vid ima try w the adapter soon I’ll update
@@holyfreeholy2329 how did it go. My port just broke a week ago. I want to find a solution
Can you recommend a parallel to usb converter for a GCC panther grc-76S that works with windows 10? The cord I have doesn’t work. When I plug it in the device manager does not refresh like yours does. It only says standard serial over bluetooth link (com5) and (com 4) im so lost. Any help would be appreciated.
Hi Tammy, which model is that? I can't find the Panther GRC-76S. Is that an older model? Does that model only have a Parallel port and not a serial port?
@@synergy17llc Yes its an older one. It has both serial and parallel.
@@synergy17llc i actually got it to work after ordering a usb to serial instead of parallel. I hit cut and the plotter starts running but then stops and the screen reads communication error.
@@tammycelli7011 AWESOME!!! If you ever need help, it's best to just call or email me. Must faster than TH-cam comments. I only see them pop up once in a while.
i have that same cable it work good and somrtime it will get error light
I have dine everything and i still can't get mines to work can u please help
What issue are you having? Did you install the serial driver for your cutter? Are you using GreatCut software or some other cutting software?
@@synergy17llc correction its a ativa usb 2.0 adapter cable
mine detects but it make crazy cut line
Sounds like it could be another issue. The pinch rollers, the blade, etc.
@@synergy17llc my cutter works fine now.. i bought another rs232 cable ♥♥♥
@@elmonlysteragbunag8848 the regular rs232 serial or the usb to serial?
@@synergy17llc regular rs232 serial 9 pins from ugreen brand..