Thanks Maymay. Just what I need...another trimmer😂😂😂 Seriously I love to see you demo stuff so I can make a more informed decision when purchasing. Hugs and blessings.
If I bring one more trimmer in my house my hubby is goin to give me a haircut. If I order this from you can you wrap it in something that doesn’t say “it’s another paper trimmer honey”. But I really really like this. Thanks for the demo. Nice cutter
Thanks for this review. I've been searching for a trimmer for ages and this is exactly what I am looking for. It seems Tonic has paid attention to customers wishes. I have just ordered one and two spare blades. What I love about this trimmer is the fact it is not cut off between the 5-6 inch mark and you had to guess the measurement. I like my score board, so the scoring blade on this trimmer isn't a big deal for me. I make cards as well and I love those lines. How easy is that. Thanks again from Oz.
Maymay - thank you for taking time to do a review of this trimmer for us. I appreciate you highlighting the features and your observations. Because of you, I have enjoyed the Cricut trimmer for a couple of years now. I do like that the bed of this trimmer is wider, minimizing the need to extend the arm for A2 cards. Blessings to you. 🙏🏻💙👍🏼
I like this. A tip for teaching left handed people, sit across from them, and it will be easier for them to learn. I do it when I'm teaching cross stitch.
Omg! That is how I first learned to crochet! i am right handed and I sat across the table of a left handed coworker crocheting something trendy at the time. I was a few months into my pregnancy of my first child and I wanted to make something for the baby. She turned 49 a couple weeks agp. Thank you, Melissa Burnett, for bringing up that sweet memory.
I love that the measurements go all the way across. Usually when there is an arm or another piece that flips out from the back, you lose measurements and have to guess. This seems to solve that problem. Thank you for the demo.
Would you recommend it now that you've had it for almost a year? I have been trying so hard to find a good trimmer that cuts straight and square and I'm having no luck.
@Peace of Junk Journals It is a nice trimmer, I found mine at a resale shop it only came with the cutting edge not the scoring attachment. This has awesome measurements, easy to read. I have multiple trimmers, seem to grab whatever is closest to me. I also have a scoreboard tool, but this one does have both with this trimmer. Hope that helped.
I really like the continuous rules in the middle and the points on the blade that show exactly where the cutting blade is. My favorite part is that I don't have to open an arm for a regular card. Thank you Maymay.
I am glad you did the demo on this. I bought it, didn't like it and almost resold it until I watched your video. You showed so many features no one else had and now I LOVE it and use it as my main trimmer. Thanks so much!!!
I love the interchangeable blade/scoring housings and the stability points. I feel like some boards that have a tendency to sway in the middle cause cutting errors (and I don’t need any help with that 😂). So many great points about this board, I had to order one.
Looks like a great trimmer. Will you demonstrate how to line up smaller pieces of paper to make smaller accurate cuts 1/8, 1/4, 1/2, 1 1/8, etc? I noticed under the clear plastic bar there are no measuring indicators for about an inch of space.
I like this method of blade changing. I have a cutter that has a spot on the housing where it is cut different so you lift the blade out, and as a lefty, I am always popping the blade out by accident because I use that end of the cutter.
This trimmer has a lot of great features. I love that you can cut more than 6 inches without having to open the arm. However, Tonic really missed on the fact that you can't have both the cutting and scoring blades on at the same time. Maybe if there was a place on the trimmer to store it, but it looks like it will be a nightmare to keep track of both blades!
Yeah, plus it's a hassle to keep taking one blade or the other off and on if you're just flying by the seat of your pants, making mistakes and re-doing, etc. I also find the ruler measurements really hard to read. I'll probably get a different one eventually. It's the first trimmer I've bought. (I have the gray model.)
That’s pretty neat that they kept left handed people in mind but I’ve been cutting at the bottom of my Fiskars trimmer that I don’t think I cut at the top even if I got this trimmer lol
I am loving this trimmer, been looking for a new one. So this might be the one! I love that it works for left handed people. Although I've gotten used to using one right handed. lol Hugs, Brenda
Looks great. I've been having a lot of issues with my trimmers lately. How does it do with the 130lb, or chipboard? I realize you'll probably still have to flip and cut both sides, but wondering if it's a clean cut. Thanks in advance, and thanks for the review.
I like a lot about this trimmer, but I think not having the cutting wire would be an issue for me. I print and cut a lot of photos, and I think it would be hard to trim them without the wire guideline. But for paper cutting it looks wonderful. I really would like to see a 3-month update on this trimmer to see how it holds up. I feel like maybe separating the plastic ruler to change blades might loosen it a bit over time. ?? The ruler in the middle and the lack of space at the fold mark is wonderful!
I'm a lefty. I appreciate that yall brought this product. Will yall carry the replacement blades. I have a hard time finding replacement blades for my cricut trimmer.
I have a Fiskars trimmer and ages ago added a self stick measuring tape in the middle of the trimmer like Tonic did here. It helps me make sure shorter papers are lined up straight if I’m not cutting on the 1/4” marks that come on the face of it. I should have patented it. Lol
I can’t even tell you how many of these contraptions I have gone through over the years. I would be curious to see how accurate the measurements are, as well as how long the blade lasts when using heavier card stock. I have two trimmers that I have been using and both blades are wearing out faster than I ever remember. I thought that it was the blade of my trimmer until the same thing happened with my other one. I bought new blades and even used a product that coats blades to last longer....but it didn’t. It makes me wonder if the blades are not made the same as they used to be...or is it the card stock weight or how they are now manufacturing it. So, please let us know how long the blades last when cutting your card stock bases for card making. Thank you. 🙂
It is particularly good for ‘filleting out the middle of a panel when you want to create a frame or to save paper, but the blades aren’t long lived so I use a guillotine for most straightforward cutting and this for the precise fiddly bits
May I ask what guillotine you use. I have a Crafters Companion and I cannot get precise measurements from it. I am probably using it wrong, but I am always off when creating card bases with it. That is why it sits on the back of my top shelf. Just curious....thanks!
Janecraftswhen... so how do you get perfect measurements? There has to be a way that I am not grasping. I have to be doing something wrong. It is a popular contraption. Any suggestions?
I love my small Tonic guillotine trimmer, but I still mainly use my Fiskars because I like the guide wire. Add a wire to this one and I'll be the first one to purchase it!
I was not a fan of the Fiskars trimmer with the wire, I used it for a long time before finding another one I really loved. The issue I had with it was the blade fell out and the wire eventually wore out. Fiskars stands behind all their products to they will replace parts that can be replaced but it was not my fav one, again, I used it a long time! lol
Thank you for this video! Your review videos are the best! You are very thorough and fair in your assessments. I bought the Cricut trimmer on your reccommendation years ago & it performs exactly as you described. I do have a problem with lining up cuts wider than 4" tho. This trimmer could solve that issue. However, I do have some questions. How available are the replacement blades? (Like others have stated, I too have noticed the blades do not keep their edge like they used to.) Will the circuit cutting blade fit in this trimmer? My reasoning - cricut replacement blades are easy to find. Most of my cuts do not require stopping at a specific measurement & could be reserved for only cuts that require that level of precision, so finding replacement blades becomes less of an issue. Thank you for asking for our questions! You're the only person who ever asks us.
I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them. I do not think the cricut blades will fit, the housing are so very different. I do so love my Cricut trimmer, praying we can get it again soon! Thanks for the questions!
I love everything about it except one thing... I like to be able to cut a small piece of paper (less than 1") in half. the raised part at the top that stops the paper is way over an inch wide. Otherwise, I think it would be mine! :) Thank you for reviewing for us.
Oh so cool. I think my only draw back would be taking the blades off & on to cut & score. They should have thought that through a little more. Will you do a product review of the comparable trimner that's coming? Thank you Maymay! ;0)
I'm glad of the double ruler as I use my trimmer the same way you do but the top ruler is hard to see for me and I prefer a ruler at the bottom closer to me
A two pack of replacement blades will be $4.99, I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them.
I see this video was 2 years ago and I also noted that I’ve not seeing it in you more recent videos. Has something changed your mind about this trimmer? Also I would like to know how long the paper can be (going up and down the trimmer). I understand across the trimmer, you can cut (I think) 12.5 inches.
I'm looking for a replacement for my years-old Fiskars rotary trimmer. It's got a rotary blade and I usually have to do 2 or 3 passes before it cuts the paper--and that's with a new blade. I also can't see the track where the blade goes if I'm trying to make a non-measured cut. This Tonic model looks like an improvement. Do you have anything to add to your review, after a year? Thank you!
When you click link to review/purchase trimmer it comes up with a 404 error. I’m anxious to try one even though I love my big Fiskars rotary trimmer for large jobs. How does it do on heavier cardstock?
The link to this product is broken on your website, and when I type in the product name in the search, only the replacement blades come up. Are you not carrying this anymore?
I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them. At least I could get the trimmer, we haven't been able to get my current trimmer for months and months.
Did you try the scoring feature? I liked the 3 rulers and the colors, the handles for the trimmer flap. I didn't like the way the blade changes. That seems flimsy and dangerous. I didn't like the no storage for the extra blades. That to me seems like an accident waiting to happen. The flip out arms if they put those why not have it a full board? It seems cheaply made with the arms and the twisting even though it has stability feet just gives off a cheaply made product. I'm a guillotine trimmer person to begin with.
If you are a guillotine trimmer person you probably wouldn't like this style of trimmer. I think it is well made and thought out, I did not try the scoring feature as I don't use them for scoring, I should have for those that do, sorry, will do better next time. It does not feel cheaply made to me, I just wanted to show just how stable it was even though it was light weight.
Not sure, I would think they would if knocked off, but they have a "lip" that holds them in and unless they are moved away from the ruler I think they would be okay.
The trimmer is $28.99, the replacement blades are $4.99 for a two pack. I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them.
How does this compare to the Tonic guillotine trimmer? Have you used it and which do you prefer? Other viewers are welcome to comment! I’m in search of a good trimmer.
I have the 12 x 12 platform guillotine from tonic and love it. I would like to have the 8-1/2 “ one too. It cuts very smooth. I wish there was a way that they’d make a left-handed guillotine trimmer.
I have to say that I love my Cricut trimmer, if we didn't need to have a comparable one in our store I would still only be carrying our Cricut trimmer but we cannot get them right now. We are hoping they are available again soon. So, that said, if my Cricut trimmer was still good and working well, I wouldn't replace it with this one or any other one at this time. I just have so many customers that are new to us that don't have the cricut trimmer and ask me for a good recommendation, so I went on the search for some. I do have more coming too so you can have options. Sorry, I don't feel that was a clear cut answer but I tried! lol
@@MaymayMadeIt very good answer. I have the Cricut Trimmer and also have Friskar trimmer. Needless to say with the later one I cannot cut a straight line.
Thanks Maymay. Just what I need...another trimmer😂😂😂 Seriously I love to see you demo stuff so I can make a more informed decision when purchasing. Hugs and blessings.
Thank you. Greetings from the UK. Excellent demonstration and I now know without any doubt I need one. ❤
It doesn't have a wire to point out where the cut is going. I really like that option.
If I bring one more trimmer in my house my hubby is goin to give me a haircut. If I order this from you can you wrap it in something that doesn’t say “it’s another paper trimmer honey”. But I really really like this. Thanks for the demo. Nice cutter
I have issues with every trimmer, I now own 7... lol
🤣🤣🤣
Too funny. But, we can all relate.😂🤣
Thanks for this review. I've been searching for a trimmer for ages and this is exactly what I am looking for. It seems Tonic has paid attention to customers wishes. I have just ordered one and two spare blades. What I love about this trimmer is the fact it is not cut off between the 5-6 inch mark and you had to guess the measurement. I like my score board, so the scoring blade on this trimmer isn't a big deal for me. I make cards as well and I love those lines. How easy is that. Thanks again from Oz.
Maymay - thank you for taking time to do a review of this trimmer for us. I appreciate you highlighting the features and your observations. Because of you, I have enjoyed the Cricut trimmer for a couple of years now. I do like that the bed of this trimmer is wider, minimizing the need to extend the arm for A2 cards. Blessings to you. 🙏🏻💙👍🏼
I like this. A tip for teaching left handed people, sit across from them, and it will be easier for them to learn. I do it when I'm teaching cross stitch.
Omg! That is how I first learned to crochet! i am right handed and I sat across the table of a left handed coworker crocheting something trendy at the time. I was a few months into my pregnancy of my first child and I wanted to make something for the baby. She turned 49 a couple weeks agp. Thank you, Melissa Burnett, for bringing up that sweet memory.
You are so welcome! I pray you have a blessed day.
Thank you MayMay we can always count on you to try these out
Oh my word! How cool is this? My mom is left-handed and she would love this!
I love that the measurements go all the way across. Usually when there is an arm or another piece that flips out from the back, you lose measurements and have to guess. This seems to solve that problem. Thank you for the demo.
Just purchased one of these . Thank you so much for a thorough explanation. You answered all my questions I had about learning to use this, I love it.
Would you recommend it now that you've had it for almost a year? I have been trying so hard to find a good trimmer that cuts straight and square and I'm having no luck.
@Peace of Junk Journals It is a nice trimmer, I found mine at a resale shop it only came with the cutting edge not the scoring attachment. This has awesome measurements, easy to read. I have multiple trimmers, seem to grab whatever is closest to me. I also have a scoreboard tool, but this one does have both with this trimmer. Hope that helped.
@@blossomk10 It is very helpful! Thank you so much! Does the blade dull quickly?
@Peace of Junk Journals Not sure but you can purchase replacements to have extra on hand.
I really like the continuous rules in the middle and the points on the blade that show exactly where the cutting blade is. My favorite part is that I don't have to open an arm for a regular card. Thank you Maymay.
I am glad you did the demo on this. I bought it, didn't like it and almost resold it until I watched your video. You showed so many features no one else had and now I LOVE it and use it as my main trimmer. Thanks so much!!!
Tfs! Does the clear arm lock in place so it doesn't flop open? Also can you cut little slivers of strips? How sharp is the cut? ❤😘
Great review. I like it. You did a great job covering all the features.
I'm lefty and appreciate this so much. I just ordered mine. Thank you MaymayMadeIt!!!!!
My husband is a lefty and he says this is great
I love the interchangeable blade/scoring housings and the stability points. I feel like some boards that have a tendency to sway in the middle cause cutting errors (and I don’t need any help with that 😂). So many great points about this board, I had to order one.
Willow Sverge that describes my scrap bin perfectly. LOL 🤦♀️
Looks like a great trimmer. Will you demonstrate how to line up smaller pieces of paper to make smaller accurate cuts 1/8, 1/4, 1/2, 1 1/8, etc? I noticed under the clear plastic bar there are no measuring indicators for about an inch of space.
If there are replacement blades, this is going on my Christmas list
I like this method of blade changing. I have a cutter that has a spot on the housing where it is cut different so you lift the blade out, and as a lefty, I am always popping the blade out by accident because I use that end of the cutter.
Although I am right handed, due to vision issues I cut left-handed with my trimmer. This would make it so much easier for me to use it either way.
This trimmer has a lot of great features. I love that you can cut more than 6 inches without having to open the arm. However, Tonic really missed on the fact that you can't have both the cutting and scoring blades on at the same time. Maybe if there was a place on the trimmer to store it, but it looks like it will be a nightmare to keep track of both blades!
Yeah, plus it's a hassle to keep taking one blade or the other off and on if you're just flying by the seat of your pants, making mistakes and re-doing, etc. I also find the ruler measurements really hard to read. I'll probably get a different one eventually. It's the first trimmer I've bought. (I have the gray model.)
That’s pretty neat that they kept left handed people in mind but I’ve been cutting at the bottom of my Fiskars trimmer that I don’t think I cut at the top even if I got this trimmer lol
I am loving this trimmer, been looking for a new one. So this might be the one! I love that it works for left handed people. Although I've gotten used to using one right handed. lol Hugs, Brenda
Looks great. I've been having a lot of issues with my trimmers lately. How does it do with the 130lb, or chipboard? I realize you'll probably still have to flip and cut both sides, but wondering if it's a clean cut. Thanks in advance, and thanks for the review.
Darn I wish I had seen this sooner. I just bought a $35 Fiskars. It's nice but I like the Tonic better!
Nice trimmer! Thx for trying it out for us!!
I like a lot about this trimmer, but I think not having the cutting wire would be an issue for me. I print and cut a lot of photos, and I think it would be hard to trim them without the wire guideline. But for paper cutting it looks wonderful. I really would like to see a 3-month update on this trimmer to see how it holds up. I feel like maybe separating the plastic ruler to change blades might loosen it a bit over time. ?? The ruler in the middle and the lack of space at the fold mark is wonderful!
I'm a lefty. I appreciate that yall brought this product. Will yall carry the replacement blades. I have a hard time finding replacement blades for my cricut trimmer.
I have this I love it so much I bought a spare.
I have a Fiskars trimmer and ages ago added a self stick measuring tape in the middle of the trimmer like Tonic did here. It helps me make sure shorter papers are lined up straight if I’m not cutting on the 1/4” marks that come on the face of it. I should have patented it. Lol
Looks like a super trimmer! Mine is not broke, but will definitely take a look. Might be perfect when I need a different one.
I can’t even tell you how many of these contraptions I have gone through over the years. I would be curious to see how accurate the measurements are, as well as how long the blade lasts when using heavier card stock. I have two trimmers that I have been using and both blades are wearing out faster than I ever remember. I thought that it was the blade of my trimmer until the same thing happened with my other one. I bought new blades and even used a product that coats blades to last longer....but it didn’t. It makes me wonder if the blades are not made the same as they used to be...or is it the card stock weight or how they are now manufacturing it. So, please let us know how long the blades last when cutting your card stock bases for card making. Thank you. 🙂
It is particularly good for ‘filleting out the middle of a panel when you want to create a frame or to save paper, but the blades aren’t long lived so I use a guillotine for most straightforward cutting and this for the precise fiddly bits
May I ask what guillotine you use. I have a Crafters Companion and I cannot get precise measurements from it. I am probably using it wrong, but I am always off when creating card bases with it. That is why it sits on the back of my top shelf. Just curious....thanks!
Izzaboutchu! Mine in small crafters companion one too. I find it ok...
Janecraftswhen... so how do you get perfect measurements? There has to be a way that I am not grasping. I have to be doing something wrong. It is a popular contraption. Any suggestions?
Izzaboutchu! Mine has 1/4 “ marks in the bed which help me line it up straight and I push paper up firmly against the ruled top
I love my small Tonic guillotine trimmer, but I still mainly use my Fiskars because I like the guide wire. Add a wire to this one and I'll be the first one to purchase it!
I was not a fan of the Fiskars trimmer with the wire, I used it for a long time before finding another one I really loved. The issue I had with it was the blade fell out and the wire eventually wore out. Fiskars stands behind all their products to they will replace parts that can be replaced but it was not my fav one, again, I used it a long time! lol
What a great review, thank you!
Maymay! I thought I was finished buying cutters! I'm going to go as long as I can without buying it even though it looks fabulous! :-)
Thank you for this video! Your review videos are the best! You are very thorough and fair in your assessments. I bought the Cricut trimmer on your reccommendation years ago & it performs exactly as you described. I do have a problem with lining up cuts wider than 4" tho. This trimmer could solve that issue. However, I do have some questions.
How available are the replacement blades? (Like others have stated, I too have noticed the blades do not keep their edge like they used to.)
Will the circuit cutting blade fit in this trimmer? My reasoning - cricut replacement blades are easy to find. Most of my cuts do not require stopping at a specific measurement & could be reserved for only cuts that require that level of precision, so finding replacement blades becomes less of an issue.
Thank you for asking for our questions! You're the only person who ever asks us.
I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them. I do not think the cricut blades will fit, the housing are so very different. I do so love my Cricut trimmer, praying we can get it again soon! Thanks for the questions!
Thank you for sharing. I’m a big fan of paper trimmer hehehe
It looks great but have you had to change the blade yet? If so how much do you think you cut before replacing the blade? Tfs:)
I love everything about it except one thing... I like to be able to cut a small piece of paper (less than 1") in half. the raised part at the top that stops the paper is way over an inch wide. Otherwise, I think it would be mine! :) Thank you for reviewing for us.
Oh so cool. I think my only draw back would be taking the blades off & on to cut & score. They should have thought that through a little more. Will you do a product review of the comparable trimner that's coming? Thank you Maymay! ;0)
The trimmer we have coming? Yes, we were only able to get 6 of them from our distributor so we are waiting to get more in before I share it. Thanks!
I'm glad of the double ruler as I use my trimmer the same way you do but the top ruler is hard to see for me and I prefer a ruler at the bottom closer to me
Thanks, it also appears that there is no gap where the arm folds out.
Correct, there isn't a gap. Good eye, wish I had thought to say that!
Oh shucks! I was sold and see that it's no longer in your store.
Great review Maymay I'm curious about the price of replacement blades. I need a new trimmer so if you can find out the cost I would appreciate it.
A two pack of replacement blades will be $4.99, I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them.
Maymay I watched other reviews that used the super trimmer. They all mentioned because of the v blade after awhile the paper feathers after being cut.
I have a lefty hubby too!
I see this video was 2 years ago and I also noted that I’ve not seeing it in you more recent videos. Has something changed your mind about this trimmer? Also I would like to know how long the paper can be (going up and down the trimmer). I understand across the trimmer, you can cut (I think) 12.5 inches.
Will the new blades be easy to find for purchase? That is one problem with the trimmer I have, hard to find new blades.
I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them.
Thank you! In search of a straight cut; ha!
I'm looking for a replacement for my years-old Fiskars rotary trimmer. It's got a rotary blade and I usually have to do 2 or 3 passes before it cuts the paper--and that's with a new blade. I also can't see the track where the blade goes if I'm trying to make a non-measured cut. This Tonic model looks like an improvement. Do you have anything to add to your review, after a year? Thank you!
When you click link to review/purchase trimmer it comes up with a 404 error. I’m anxious to try one even though I love my big Fiskars rotary trimmer for large jobs. How does it do on heavier cardstock?
Thank u. Would like to purchase but it keeps saying page not found
I love this paper trimmer, but I have not been able to find the blade replacements, not even in the Tonic site.
The link to this product is broken on your website, and when I type in the product name in the search, only the replacement blades come up. Are you not carrying this anymore?
I had the original orange and wore it out. It was hard to find the blades. But a great trimmer.
I've seen other people say that...
I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them. At least I could get the trimmer, we haven't been able to get my current trimmer for months and months.
This looks pretty good! Tfs! Have you tried a craft glue called bearly art and if so, do you like/recommend it?
How long do the blades last? Like the Fiskers ones are terrible have to replace them like every other day
Will we be able to purchase new blades as needed? That's the deal breaker for me 😉
I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them.
@@MaymayMadeIt thank you
Im right handed and usually use the bottom lol
Can this trimmer fit an 8.5 X 11 piece of paper diagonally?
How well does the scoring blade work?
I tried to order it thru the site link but it keeps saying page not found😢
Hi, we are currently sold out of this trimmer, thanks
Can't get to your store online, how do you find it.
Hi here is the store website link www.maymaymadeit.com
Did you try the scoring feature?
I liked the 3 rulers and the colors, the handles for the trimmer flap. I didn't like the way the blade changes. That seems flimsy and dangerous. I didn't like the no storage for the extra blades. That to me seems like an accident waiting to happen. The flip out arms if they put those why not have it a full board? It seems cheaply made with the arms and the twisting even though it has stability feet just gives off a cheaply made product. I'm a guillotine trimmer person to begin with.
If you are a guillotine trimmer person you probably wouldn't like this style of trimmer. I think it is well made and thought out, I did not try the scoring feature as I don't use them for scoring, I should have for those that do, sorry, will do better next time. It does not feel cheaply made to me, I just wanted to show just how stable it was even though it was light weight.
Will the blade come off if it is tossed in a drawer or bag?
Not sure, I would think they would if knocked off, but they have a "lip" that holds them in and unless they are moved away from the ruler I think they would be okay.
Maymay Made It Crafts great! Wasn’t sure how tight it was or if slightly opening it would make the blade release
How much is trimmer and replacement blades. How is to get replacement blades also
The trimmer is $28.99, the replacement blades are $4.99 for a two pack. I have the blades on order, they are out of stock at my distributor but as soon as they are back we will have them.
How does this compare to the Tonic guillotine trimmer? Have you used it and which do you prefer? Other viewers are welcome to comment! I’m in search of a good trimmer.
I am not a fan of guillotine cutters, they have just never been my thing. Sorry, I am not the one to answer that question.
I have the 12 x 12 platform guillotine from tonic and love it. I would like to have the 8-1/2 “ one too. It cuts very smooth. I wish there was a way that they’d make a left-handed guillotine trimmer.
Is it better than the Cricut Trimmer?
I have to say that I love my Cricut trimmer, if we didn't need to have a comparable one in our store I would still only be carrying our Cricut trimmer but we cannot get them right now. We are hoping they are available again soon. So, that said, if my Cricut trimmer was still good and working well, I wouldn't replace it with this one or any other one at this time. I just have so many customers that are new to us that don't have the cricut trimmer and ask me for a good recommendation, so I went on the search for some. I do have more coming too so you can have options. Sorry, I don't feel that was a clear cut answer but I tried! lol
@@MaymayMadeIt very good answer. I have the Cricut Trimmer and also have Friskar trimmer. Needless to say with the later one I cannot cut a straight line.
yayyy im a leftie