Products that we use and recommend: ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
I am curious to know what fuse actually so I do agree with you guys on that. I literally rewind to see what fuse was missing and where did he put the replacement. The low beam video he has is perfect
Yep another good video I checked all fuses and relays and tested them getting 12 volts to the bulb also replaced bulb no high or low beam 2012 Ford Taurus
I have a 2013 Focus se. The low beams work but when i hit the high beams a get a low bulb fault on the drivers side. I turn off the high beams and the driver side bulb is out but if i turn off my car for a bit the bulb will work. Help please!!
My ford focus MK2 front passenger low beam and passenger tail light low beam doesn't work. When I lock/unlock the car they come on for a split second but turn off. Which fuse would I check for this issue??? Drivers side front and rear work fine. Issue started after replacing brake lamps.
I'm working at a car service shop, we service a good amount of Ford Transit Connect from different fleets. Some of them just keep coming back for new headlights, they blow out one after another. We are putting in Neglin H7 headlights and haven't tried other brands yet
Which fuse did you replace?? In your other video you said what fuse you replaced for the low beam and in this one you don't say anything about it so how am I supposed to know!! It doesn't say in my owners manual
Listening and trying to understand you is more frustrating than the problem You’re video is not helpful You didn’t even say what was the fuse number You only said “this is the fuse”. We all know how a fuse looks like
Do you have a video of a mustang 2017? My mustang headlight from the side of the pilot is not working, the turning signal works also the 3 stripes but not the main light bulb but the light bulb works because I try it in the other side
Hello, can you suggest what could be a problem - my focus 2011 have upper LEDs ("eyebrows") which are linked to daily lights set. When I turn contact on, they turn on normal, and when I star engine, they turn off (they worked together at start, then only right one turned off while driving, and now both are off while driving + notification on board - headlamp malfunction service repair). Does it something with wiring, fuses, or something... Any help? Thanks Thanks
I wish it was always that simple. I’ve been working in this 2015 Lincoln mkc (garbage); one problem after another. This time the driver side high beam is stuck on. The passenger side can switch between low and high; but the driver side, no matter what setting you turn it to (headlights on or auto lights) the high beam just stays on. I tried changing the bulb, checking the fuses and other relays. Nothing worked. At this point I’m pretty sure it’s just the whole headlight assembly that needs to be replaced, even if all the other parts of it work (blinker and led strip). Oh but of course why wouldn’t my client want to spend nearly $1k for a single headlight? New ford and Lincoln models are trash.
Can someone please help me, i have a 2013 Ford Focus se. I have purchases 2 different types of led lightbulbs and they do not work. When i turn on the lights they come on for like 2 seconds and turn off. Anyone else have this issue?
I checked every fuse, bulb, switch and wire in my entire car and one of my bulbs still does not work when the car is on... my problem as the smart junction box.....so the information here did nothing for me but waste my time..... WHY DOES NOONE EVER SAY ANYTHING ABOUT THE SJB ?!?!?!?
Hi I have a 2012 focus hatchback and the right headlamp does not turn on the low beam but the high works in the left side they work good and my right headlamp and lights are new, what can be causing this problem?
@@alfredohernandez1978 i just jumped power from the other side, these cars are garbage now same thing with my 15 fusion. 🙄 wait till you change the blower motor 😬
Just upgraded the halogen head lights to lLED on my ford focus 2013. After a few hours pf using it, had a dipped beam light fault error on my dash. I really want to keep my LED, how do you fix this?
A canbus conversion cable is available in Australia specifically for the Ford Ranger and Mazda BT 50 that have a problem where the BCM (body control module) sees a different resistance and shuts down the low beams sometimes only one side, usually when fitting non STD bulbs, including LED'S or even different type or wattage halogen from Std fitments. The vehicle throws a code requiring a plug in at dealer to restore function. Frankly it's a pain in the ass and not common in most other bands.
I have a 2012 Ford-fix or repair daily Fusion and the only way my A/C will work is if my headlight switch is in the auto position and my fog lights are or, or I have the headlights on also the fog lights must be on in both scenarios! I figured it out cause I flashed my fog lights to warn a motorist about a cop running radar and my A/C started blowing warm air before I got home in a few miles. I did know I had a problem before flashing my fog lights. It's the weirdest thing I've ever seen on a car!!
Hey i have a 2012 ford focus se and i have a headlight issue. Only my driver side low beam works and not the passenger side. I checked all my fuses and their new bulbs. I also bought a new light switch and still same issue.. Anybody can help me what is there i can do or what is the issue with im having?
My old 2015 Ford Escape that I changed the low beams headlights a couple times w/o any problems. It was very easy to do for me. Even when I had a 1998 Ford Contour that I changed the headlights twice when I had it.
Products that we use and recommend:
► Panel Removal Set: amzn.to/3YiMADu
► Assorted Fuses: amzn.to/4fx4s3F
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Which fuse did you replace
Which fuse is the one you change it? I am not understand which one you change it.
I am curious to know what fuse actually so I do agree with you guys on that. I literally rewind to see what fuse was missing and where did he put the replacement. The low beam video he has is perfect
Most of the owners manuals will say what fuse is for what, that’s what I did
Yep another good video I checked all fuses and relays and tested them getting 12 volts to the bulb also replaced bulb no high or low beam 2012 Ford Taurus
Hi where's the relay for high beam..nothing in manual.. changed 15amp #74 but it's still blowing out .. help needed...
No relay on 2013 to 2019 ford escape according to another video of his. Fuse 74 interior fuse box. #24, 39, 43 under the hood fuse box.
Wow,
thank you so much he help me, you are the best!!!
I have a 2013 Focus se. The low beams work but when i hit the high beams a get a low bulb fault on the drivers side. I turn off the high beams and the driver side bulb is out but if i turn off my car for a bit the bulb will work. Help please!!
My ford focus MK2 front passenger low beam and passenger tail light low beam doesn't work. When I lock/unlock the car they come on for a split second but turn off. Which fuse would I check for this issue??? Drivers side front and rear work fine. Issue started after replacing brake lamps.
Did you find out which one?
I'm working at a car service shop, we service a good amount of Ford Transit Connect from different fleets. Some of them just keep coming back for new headlights, they blow out one after another. We are putting in Neglin H7 headlights and haven't tried other brands yet
Which fuse did you replace?? In your other video you said what fuse you replaced for the low beam and in this one you don't say anything about it so how am I supposed to know!! It doesn't say in my owners manual
Do you have a video on low beam lights for a Ford Focus 2012-2018 ?
What fuse is it? Can you answer that for us? Fuse 74 is for low beam as described in another video but what about high beam?
Look it up. Escape fuse diagram :)
Fuse position number please, otherwise it is a good video.
Thanks for showing which fuse it is
You must have watched a different video because he did not show it here. It was 74 on another video for Ford Escape.
This guy talking like he's under water lol
Listening and trying to understand you is more frustrating than the problem
You’re video is not helpful
You didn’t even say what was the fuse number
You only said “this is the fuse”. We all know how a fuse looks like
Exactly🤣
My issue was a slightly corroded socket where the headlight goes. One one light was burnt out but the bulb itself was fine.
Do you have a video of a mustang 2017? My mustang headlight from the side of the pilot is not working, the turning signal works also the 3 stripes but not the main light bulb but the light bulb works because I try it in the other side
Hello, can you suggest what could be a problem - my focus 2011 have upper LEDs ("eyebrows") which are linked to daily lights set. When I turn contact on, they turn on normal, and when I star engine, they turn off (they worked together at start, then only right one turned off while driving, and now both are off while driving + notification on board - headlamp malfunction service repair). Does it something with wiring, fuses, or something...
Any help? Thanks
Thanks
Which fuse ??
Which number ?
You are not clear
I wish it was always that simple. I’ve been working in this 2015 Lincoln mkc (garbage); one problem after another. This time the driver side high beam is stuck on. The passenger side can switch between low and high; but the driver side, no matter what setting you turn it to (headlights on or auto lights) the high beam just stays on. I tried changing the bulb, checking the fuses and other relays. Nothing worked. At this point I’m pretty sure it’s just the whole headlight assembly that needs to be replaced, even if all the other parts of it work (blinker and led strip). Oh but of course why wouldn’t my client want to spend nearly $1k for a single headlight?
New ford and Lincoln models are trash.
2011 FORD FUSION DRIVER SIDE LOW BEAM NOT WORKING CHANGED LIGHT STILL NOT WORKING. COULD IT BE THE FUSE?
Have this same problem hopefully someone can tell me what fuse it is
Same but passenger side. It’s frustrating
Me too
Can someone please help me, i have a 2013 Ford Focus se. I have purchases 2 different types of led lightbulbs and they do not work. When i turn on the lights they come on for like 2 seconds and turn off. Anyone else have this issue?
Same problem can anyone help?
@@sarahhorsey923 Hi, you need a resistor or a led Canbus
Also i do not recommend this led on the factory headlights. It looks great but it’s not functional at all.
Wow. You changed a fuse.
Great videos, too many to watch them all but please keep going.
Thanks
I checked every fuse, bulb, switch and wire in my entire car and one of my bulbs still does not work when the car is on...
my problem as the smart junction box.....so the information here did nothing for me but waste my time.....
WHY DOES NOONE EVER SAY ANYTHING ABOUT THE SJB ?!?!?!?
Ford Fusion 2013 Low beams. Don’t work I can’t find the fuse number. Somebody can tell me which number it is
Hi I have a 2012 focus hatchback and the right headlamp does not turn on the low beam but the high works in the left side they work good and my right headlamp and lights are new, what can be causing this problem?
I HAVE THE SAME ISSUE, DID YOU FIX THE PROBLEM?
Hi I have the same problem. Did you find the solution? Thankx
Any update on this?
I have not found the problem yet I bought a new headlamp and still have the same issue
@@alfredohernandez1978 i just jumped power from the other side, these cars are garbage now same thing with my 15 fusion. 🙄 wait till you change the blower motor 😬
This just made me more confuse 😂😂
thanks for fix
Defo works as an auctioneer in his spare time him
But you don’t show which fuse it is?
Where’s the other video?
I have tried and tried but I am sorry mate I can not watch your video one you talk to fast and 2nd I can only understand half of what you are saying
Hello,
I have a 2012 Ford Focus Titanium, Whats the fuse number for low & high beam?
Thank you!
Same bro
Just upgraded the halogen head lights to lLED on my ford focus 2013. After a few hours pf using it, had a dipped beam light fault error on my dash. I really want to keep my LED, how do you fix this?
Someone said you need a resistor so it doesn’t throw a code
A canbus conversion cable is available in Australia specifically for the Ford Ranger and Mazda BT 50 that have a problem where the BCM (body control module) sees a different resistance and shuts down the low beams sometimes only one side, usually when fitting non STD bulbs, including LED'S or even different type or wattage halogen from Std fitments.
The vehicle throws a code requiring a plug in at dealer to restore function.
Frankly it's a pain in the ass and not common in most other bands.
Nice
I have a 2012 Ford-fix or repair daily Fusion and the only way my A/C will work is if my headlight switch is in the auto position and my fog lights are or, or I have the headlights on also the fog lights must be on in both scenarios! I figured it out cause I flashed my fog lights to warn a motorist about a cop running radar and my A/C started blowing warm air before I got home in a few miles. I did know I had a problem before flashing my fog lights. It's the weirdest thing I've ever seen on a car!!
9 year old car moron
why my lights never going off? help please
Make sure the headlight switch is set to auto, or off
Hey i have a 2012 ford focus se and i have a headlight issue. Only my driver side low beam works and not the passenger side. I checked all my fuses and their new bulbs. I also bought a new light switch and still same issue.. Anybody can help me what is there i can do or what is the issue with im having?
I have the same problem. Did you get yours fixed
@@naufdogunleashedI have the same issue too!!! Did you figure yours out?
@@breashalantz4500 nope.
My old 2015 Ford Escape that I changed the low beams headlights a couple times w/o any problems. It was very easy to do for me. Even when I had a 1998 Ford Contour that I changed the headlights twice when I had it.
Too much talk no action
You talk too fast!
Slow down man you gonna trip on your tongue
He's speaking pretty normal lol 😂 just has a accident 🤣
Thats what im sayin
Lmao, I'm listening to it on 1.5x to try and get though it faster 😂😂
Slow down! You're not an auctioneer!
Worthless
sounds like ur drowning
Talks too fast
Talk to fast. Dont show anythinh