Building a No-Weld Woodgas Generator! (A Functional Gasifier Built W/ a Hand Drill and Grinder?!)
ฝัง
- เผยแพร่เมื่อ 13 ม.ค. 2021
- This project and video were created as a response to many of the comments that I received from my last DIY gasifier video. I realized that I had taken my ample tool selection for granted and decided that I would make an effort to bring substantial woodgas generators down to a level where they can be build for less than $100 in tools alone. No welding equipment required!!
This was quite a simple project and I would like to think it's something that, for so little effort in, might be invaluable in the right(or wrong)circumstances.
Firewood to electricity? The knowledge has been around for over 100 years but has since been forgotten due to the lack of need in modern society. I would encourage anyone interested to do some more research into this topic! I very much enjoy exploring projects like these, and I hope that you enjoy it as well!
Please comment and let me know what more you would like to see in the future.
Don't forget to "Like," subscribe, and share this video with your friends! Because... you just never know.
Best regards,
-Tate - วิทยาศาสตร์และเทคโนโลยี
The Germans built these on their tanks in WWII when they ran out of fuel. It doesn’t provide as much HP capability but at least they didn’t have to abandon them when the fuel truck was empty. I’m amazed at the knowledge that has been lost due to modern conveniences making us lazy and ignorant. Great video!
Eh no they didn't... but they used a similar method to produce their fuel.
Lost or hidden?
@@lukasaaron102 lol neither, this knowledge is incredibly well documented and is available via said modern conveniences on probably 1000 youtube channels. Its simply that its not as relevant knowledge as it used to be.
I’m familiar with the concept. Who said it was lost?
Lost ot hidden? It is literally common knowledge isn't it? Like saying a steam engine is lost
A couple of suggestions from an OLD GUY!
FIRST, turn the orientation of any bolts so the threaded ends are inside the angle iron frame to help prevent ANKLE BITE! Those threaded ends waving out in the open are just waiting for you to walk by!
SECOND, and this is not really necessary, but duct the hot exhaust gases from the generator engine back to the gas generator. Make sure the hot gas can swirl around the gas generator similar to a metal melting furnace, with the gas generator being the crucible! If insulated well enough you will be able to turn down the inlet O², maybe down to nothing, which will increase greatly your combustible gas output, as well as water output.
Right now, most, if not all, of your hydrogen is burning inside the gas generator! Look up STOKOEOMETRIC (spelling I know) ratio for hydrogen. Hydrogen will burn in a 6% to 94% mix with Oxygen (might be 4% to 96%, I'm old, have not used this memory for 45-50 years). ANYWAY, 2H²+ O² > 2H²O + 4 Electron Volts of energy! So this is where your water is coming from. And yes, I know, the subscripts on the H's and O's are in the wrong place, I don't know how to put them on the bottom with my phone!
stoichiometric
Good input old man.
I'm a chemistry ⚗️ enthusiast, trapped in a medical doctor's life, though I effortlessly ace my biology.
Cheers man 🍻
I gotta say it's really great to see young people actually building things ! Not only building but explaining as they go in great detail ! You should be really proud , you did a great job with this and I thank you .
ditto
Dude I’m telling you what. EVERYONE needs a friend like you.
and jimmy
this is basic, everyone should be able to do things like this. modern times made people forget hot to logically think
Made in China :)
Ŕŕŕďď
this isn't a new thing, in WW2 alot of vehicles and houses were powered by wood gas.
Dude, that drawing at 6:10 is one of the best amateur illustrations I've ever seen. Hell, better than a lot of professional ones. No apology needed!
I like his 3D shading.
That's for sure.
I absolutely agree. practice dose not make perfect, doctors are living example; they sign there name 1000 time every day and there hand righting looks like the same 4-year-old who designed are medical system (I swear to God the 3-year-old could make more articulate logical decisions with playdough)
Jjkljjljjj
I have made a career out of drafting / hvac design....I would not be doing it if I had to use pencils...
You are not only a smart hands-on engineer but you are also a great teacher. I really liked this video. Great job. Keep it up.
Greetings.... hope you're aware of the new digital currency recommendation which is GCR?
I remember in the early 1970’s of a man using the same refining system to run his household and car. He used junk mail as the fuel source. The man I think was a mechanical a Mechanical Engineer. This was a time in America when everyone was looking for an alternative fuel source because of the gas crunch of 1973 to 1974. Then fast forward to the, Iran, Iraq war those two countries flooded the oil market to gain financing for their own War economy and have a definite winner. The war ended between those two countries and a truce was made. Thus after a certain amount of time the price of fuel climbed and now. Today’s prices which has become somewhat unaffordable for a lot of fixed income folks. Well done video you’ve done a great service to your fellow countryman. Please keep it up this country needs more men like yourself. Semper Fi.
this was used in WWI AND WWII by US farmers to run their tractors.
I have watched hundreds of these gasifier videos. Yours is BY FAR the best easiest to understand...Well DONE YOUNG FELLAR!!!!
Agree
this man goes to hardware shop and ask them if they want to buy his tools
True
Sweet.
I have been running generators on woodgas for thousands of hours, over the past 8 years.
It is rather addictive stuff to play with, but I ain't complaining, as I haven't had a power bill since 1994 :) .
Do you have a website to view it ?
@@kingscairn
Yup. Videos are on my channel.
Hint: combustion heat chamber under and separate from generation chamber.
Avoids some combustion problems you mention, (ie: safer) easier construction,
It also allows addition of a gas burner that could use a small portion of generated gas to maintain heat to generation chamber. (I played with wood gas 45 years ago.
That's the designs that I'm more familiar with George that I've seen in places like mother earth news. And that's not taking anything away from this young man. When you're producing wood gas what you're basically doing is "cooking" the wood at a high enough temperature in an anaerobic environment without burning it to drive off the gas. Basically you're creating charcoal which you can use later for cooking. So why not use a "traditional" cooking process with separate combustion chamber and gas generation chamber. If you already have charcoal why not use it in the heating chamber instead of burning the precious wood. Good idea to bleed off a small portion of the gas to make the process more efficient.
add a dirt leg with a cleanout on the outlet or downstream before the equipment connection.
Yeah, I mean ultimately if you want to do this right, you want to start with charcoal or coal in a separate gas generator heated by whatever (oil, wood, coal) and inject superheated steam into the heated coal/charcoal chamber. Then you get more gas and don't have to do 99 percent of the filtration. Also, there's no reason to remove the water vapor. Its not hurting anything. You don't want it to condense, but its at least as inert as the huge amount of carbon dioxide this thing already produces.
@@rex69832 Because this is quicker and doesn't need as large a heat source. As you noted its less efferent and will eat way more fuel but attached to an old VW bug... I'd stick with this and keep a bag of chips in the frunk.
I couldn't help but smile when you showed all your grinding safety precautions....then no gloves. Outstanding. Awesome project 👌
Getting a cut to the eye is a life changing event. Getting a cut on the finger, no so much.
In 2008/09 the company I worked for built a full size test plant gasifier. We had 2 or 3 counties bailing their field scrap after harvest, switch grass, basically any and all biomass. We were feeding the thing the large square bails, and it was a hungry beast. but we were trying to do a lot with it. I was the instrumentation tech on the project and we learned some things that just didn't show up in the math or drawings. Ours test plants intention was to take the place of the natural gas feeding the boilers of the regular plants we built, like an add on.
im sure you will live a long asthma free life. and you're ex-ceo visited often enough to make sure he stays just as healthy.
did the plant put out enough gas to feed the boiler or turbine
@@farmerrobert5978 It was just a prototype plant with it's gas going to a flare, but yes it should have been able to "contribute". I guess every little bit helps but dam they were labor intensive. The problem is the staggering amount of NG that our regular plants used. With all of the effort to keep that practice gasifier fed and it still would have only powered one of our burners. Each of our base plants ran 4X 40MMBTU product dryers and 2x 100 MMBTU thermal oxidizers per plant, running 24/7. And like I said, they wiped out like 3 counties of every bit of baliable biomass there was to get. So in the end, I don't know. It was a learning experience and it defiantly has potential. I think it will have to stay sized for a household or even a community. Trying to go industrial sized runs into logistics bottlenecks that can't really be overcome.
@@sgtrock68 maybe look into connecting with a document destruction company? 🤷🏻♂️
@@sgtrock68 great info thank you for sharing
Since I dont have a welder (or welding skills) this is greatly appreciated.
The indian variant uses a lot of hot glue. Also you get droning rat squealing youtube music to listen to!
Excellent job sir. My father was born the day of the stock market crash of the Great Depression. I remember him and my uncles telling me of people running these during WW2 to power their trucks.
I don't know why you showed up in my feed but I am glad you did. Amazing!
You young lad are a genius. I love the way you explain things and how it works. I would love to try this sometime, but it'd be easier for my old ass to use my welder🤔. Your an inspiration. It's hard to find young people do great works like this. I would like to hear your story how you got started into doing these engineering feats. Great job!!
He sounds like someone who matured early. You listen to his method of speaking, his competence at what he does. This is what humans used to be like before the advent of no kid left behind gold stars and 30 year old millennial children in adult bodies.
@@neglectfulsausage7689 bingo!
@@neglectfulsausage7689 100%. When I bought my house I was 26 and I didn't want to pay for a realtor so I did all the testing and research needed to do everything without a realtor.. My loan officer was surprised and asked me if I work on my own car too. I said yeah, a month before I just removed the engine and replaced with a new one because I threw a rod in the old one. He was really surprised lol.. More people need to know how things work and to not depend on others to make or fix things for your survival. At least have basic knowledge of how most things you use every day function.
Young people might work harder and be more creative if their parents and older generations supported them instead of shitting on them like a typical boomer. Go find young men and support them instead of complaining about the younger generations
Life befer Google and cellphones had common sense....now everyone just has Google sense unless they was raised up right like this feller....thank yer upbringers fer that.
Texans here looking for power in the snowpocalyapse.
Build a snow engine. You're practically living on texas white tea!
What's a snow engine?
Are you a yeti?
@@someting9205 An engine that runs on snow. Are you daft?
@@someting9205 Oo
I am 98 years old and still have my original unit from 95 years ago running.
These videos make mr thessalonian's videos seem like sudo science. Very clear and detailed video, thank you
Very nice compact gasifier. I made one years ago from 40 gallon drums and ran a petrol car engine with three alternators on it. I used 10 mm charcoal for fuel ( I make charcoal anyway) it mostly ran great but required a lot of attention and took quite a while to get going.
Someone offered me £200 for it and I took it.
Great video, you're a bright guy, thanks.
I'll give you $300!
Wow, i woukd really like to hear more about yours that you built. What was with the 3 alternators?
Do you make Activated char?
@@1realtruthrightnow742 Well since alternators generate electricity, they were probably hooked up in parallel to get more current.
Got to show my husband this one he has been wanting to build one.
Such a good wife!
I Second that
Great explanation of the design and construction process, as well as the science behind the device. And Jimmy is a cool cat! Many, many thanks!
Nice clear video...what a great school project for every country to show power sources right around us..without digging up the earths millions year old oil.
I want to see that run for 4 days straight and then tear down to see how the filter worked and the other components.
Here: th-cam.com/video/_VWO51YoMMA/w-d-xo.html
@@EnFuegoDuo hardly the same unit.
You'd probably change filter every other day unless you want it to clog the motor.
well instead of waiting for that video you want to see why dont you just build this idea using a welder yourself?
and also you can make a bigger and sturider filter with sheet metal
Thank you for taking the time to moderate the noise levels. An added touch that is definitely appreciated. I'm always adjusting the sound in videos. Subscribed for sure.
Yes, i hate huge noise differences in videos.
GOOD ON YOU MAN Id have literally LOVED to have had a friend like you around growing up. Man keep living a good clean life, building and learning! Alot of wrong paths to go down...Dont waste ANY of this talent bro. You could help alot of folks if you like.
Shoutout from htown man! Loving this design. Really getting interested in bioenergy and biomass gens.
Dude I love how unassumingly you present this knowledge. Living where I live, the likelyhood of me ever building such a contraption is close to zero but I thoroughly enjoyed this learning experience while watching you. Keep it up!
Brother I cant tell how much I appreciate this project. Totally awesome. Thank you!
That's a brilliant idea to use an old radiator heater for a gas cooler like that. I've seen more than a few of those heaters for free.
"Bc Bcp h
+
Thanks so much Tate for sharing your Knowledge and expertise with everyone in such a professional manner.
I would like to build the same thing maybe with some additional safety measures for the reactor.
Please keep up your great work young man. You are a star and I love your cat too. 😃
Using that old heater as the heat exchanger is genius!
God you're so young! I thought you'd be a 40 year old farmer or something from the previous gasifier video. You're so mature and capable!
You can add a water injection system to our carburetor to clean the engine and get a little more power.
If you pull the gasses through a bubbler, it will collect all the particulates and cool the gas at the same time.
ya bro just like your moms bong
This is my favorite build across TH-cam, and I've watched a lot of these videos. I like this one in particular due to its compactness and simplicity.
Wow, I'm really impressed, you are a natural in building projects made with steel; this gasifier is amazing. For your young age you have immense knowledge, I hope there are other young folks like yourself out there, I haven't come across two many lately. lad I found your site.
Guy massages matter into different forms of energy...and it's absorbing to see him do it.
It's very valuable information. I've known about them for years but never got round to making one👍👍
amazing what did you do with this "very valuable" information?
did u got round 2 making 1 yet?
@@youvebeenspooked I noticed you were a bot then told you nothing😂👍
6:01 "Messy Diagram" *Shows concept-art like sketch*
yup
Loved the high art shading and mechanical drawing knowledge. No complaints from this artist.
I love watching videos like this. Shit like this can totally be scaled up once you understand the basics of how they work, so to me watching stuff like these wood gas generators, or home built metal foundrys and casting jobs i think are bad ass.
This is by far THE best DIY gasifier video I've seen. Thank you sir from an old geezer.
Thank God for EFI and flex-fuel. This could be the SHTF savior! Thanks for the awesome videos. Now I want to see you run a truck off of 1!
Perfect for the umpcoming Apocalypse!
Who knows. 2021 hasn't had a great start so far.
@@randomn6473 It was predictable that 2021 will be worse then 2020... So I did a depressiv evening on the 31th... To welcome the new year as shitty as it is! 😂
@@hanzkranz1319 Chin up. Just know that not everyone has the news turned on...
@@randomn6473 yeah now we need tutorials on how to make a destilator to have booze, i don't wanna just to survive but have a great time till end!
@@malicious1111 this old guy left us knowledge on how to do that too! check this out:
th-cam.com/video/glQjCKAI4gA/w-d-xo.html
Kudos I got mucho satisfaction from this when you started the generator and flipped the light switch . YOU ARE MY FRIEND INSPIRATIONAL AND SOMEONE TO LOOK UP TO FOR YOUR IDEAS AND NEVER QUIT ATTITUDE!!!!! NICE WORK THANK YOU
Thank you for your kind response.
You explained things better than the professor did.
We did basic - and used the gas for just a flame.
Your addition of a condenser and filter... Very smart.
We found that the de-gassed wood chips could be re-used as fuel,
and burnt to ash. Your filter material (sawdust, was it?) could be re- purposed.
Either gassified or as fuel. Or both.
I have not seen your other videos. This one showed up random. Lol.
This one was very well done. I will look for more.
Take care and keep up the good work.
And thanks for the memories. Those were worry free times.
First video of yours I've seen. Really interesting. And I dig that cat, and the hidden kalash.
Always a good day when I get a notification about a Randomn video
Always a good day when I read kind comments! Thanks so much!
@@randomn6473 How long does the gasifier produce wood gas on a full load?
More like " a WOOD day " eh eh ill let myself out
Artful, in sketch, design, voice, explanation, meeting those welderless guys needs, entire vid was a must finish.
Stoichiometric, not everyone knows what that means. A must for understanding an engines needs.
What?, No hydrogen generator to blend into intake to clean some of the gasses- kidding.
A funnel-shaped hopper mounted stop lid to add pellet fuel, blast gate valve to seal off oxy.
His blessings to you young man. Keep up the great work!
I'm going to have to watch this again and check out the down draft as well. Thanks
Amazing video. My only input would be to close the reactor with springs instead of the latches on the paint can. This will prevent it from becoming a bomb in the event of a back flash or anything. Again amazing job, keep it up!
Need a pop off somewhere !!!
I would've want to be near it if it had a hiccup either way !!!
Hydrogenated saw dust introduced into oxynen in air ??? What could possibly go wrong ???
Watch the video on the saw dust leaf blower an fire !!!
he only cares about views
no one who has watched this has ever made one or ever will, and if they do they will eventually blow a hand off or worse in the middle of fucking nowhere with no opportunity for recovery; would be a funny entry in the darwin awards tho
He has a pop off/flapper for just that eventuality. He shows it at the end part of the video...
So as an added catch I suggest using a tee fitting when you turn down below the main burn tank with a drip leg of about 2-4 inches. Which you can clean out every now and again. Allow any pieces that get past the grating to fall into it and stay trapped. It's a plumbing thing when we pipe natural gas systems to either a furnace or water heater. Not sure of needed but always helps to cover your ass
Thank you for the no-weld design! Excellent hand-drawn diagram. Cute kitty!
Amazing! Another aspect to gasification with no welding needed. A great leap for gasification. Thank you smart guy you can think out of the box.
This is my 1st time seeing one of your videos...you sir are a wizard! I will definitely be liking and subscribing. thank you for the detailed build now I can try and start one of my own
This is a pretty compact gasifier build. And, the cross section drawing was great, as previously mentioned in the comments below. I wonder if the 12V fan must be running all the time, or if the carburator suction is enough to create the airflow when the contraption is up to speed.
at the end of the video he said there wasnt enough airflow to start it without fan. When its warmed op and your engine is sucking in the gasses you can turn it off
Wow, thanks man.
I remember seeing pictures of those gas-machines on the back of cars in the war.
I learned so.ething new and more important....VALUABLE. I'm a huge off grid guy. teaching and learning at every chance. I'd never heard of this before. awesome. will be watching a few times until I've got it. thank you
trying to do homework then gets a notification for another video.... "yeah ive got time" Keep up the brilliant ideas man!!
Much obliged!
hey, o i have a couple questions for you about the gasifier because when getting parts i found some problems so I would like to ask a couple questions/requests.
-how did you get a 5-gallon paint pressure pot for under 100 bucks
-can you give me a full list of the items used (if not that's okay I can do it on my own)
-do you have any suggestions on where to get that kind of car part.
-Where do you think I could get a cheap junk radiator like yours which I could get for a cheaper price
If you cant answer my questions that's fine you are probably busy with your next project.
and does the blower motor have to be metal
@@hudsonhill6925 I'm happy to answer your questions!
-I found the pressure pot for free in my neighbors junk pile. (It pays to ask around)
-I so found the radiator for free in a friends junk pile.
-The blower does not have to be metal as long as the gasses are cool enough by the time they get there. I would even consider adding another radiator if you can find one. The cooler the gas is, the better.
Okay thanks for your response
Really helpful, ill tell you if I ever get to finish it
On the corner of your radiator, you should add a collector for the liquid vapor that will condense out. You could add valve or pipe fitting to that collector to easily drain it between burns to keep the entire system as dry as possible.
Very in depth and informative tutorial - its very similar to how charcoal is mass produced in a kiln but driving the gases off not utilising them and some - 👌👍👍
Indeed those times are coming. To be prepared is the only way of beeing self sufficient. Thanks for sharing!
We really need more young people with this kind of knowledge in this country. Well done!
I just found your channel yesterday and it is GREAT! I see you have only been uploading videos for about a year and currently you already have 85K subs! The growth of your channel is obviously because of your ingenuity, building knowledge, and video editing skills. I subscribed and can't wait till the next video. Keep up the good work!
This is incredible. Thank you for showing how to build this. I’ll be looking at making one for my workshop. I just have to find the parts here in the UK
you are the first person who clearly explained ! Thank you very much!!!
This is a pretty dang dope project you've got going there! Love how you show off all your PPE then it cuts to you using the angle grinder without cut resistant gloves! Be safe brutha and keep a fire extinguisher handy! ;)
Fantastic explanation and build. Doing it with found objects and no welder makes it even better than fantastic. Subbed. Keep it up, my friend! It's inspiring.
Amazing. Coming up with the simplest way to teach, a simple person such as my how to what to me would be impossible to make or have. Very much appreciated
Yes, this is a great video, and I can't wait to try building it.
I think you have an amazing approach here great job! Unless I miss something, would sure like to have information about the amount of wood that you use the size of the device and how long you can power that generator and what sort of wattage you can pull from it
Nice clear instructions man, thank you. Would mounting the cooler on a slant towards the drain help to keep the tar etc. flowing out? Have you ran an engine for an extended time and then examined the engine for carbon buildup? Has long does the filter media last and can you then use it for fuel in the gasifier? Cheers!
amigo esse foi o melhor passo a passo que já vi para montar um gasificador, parabéns!
Thank you for your hard work and explaining everything straight.
I completely forgot why I subscribed to this channel but this video is incredible. I’m glad I subbed haha!
Edit: it was the invisibility shield.
Thanks for the sub!
For me it was the tank that drew me in lol
Nice build with basic tools and innovative recycling. Should be useful in an emergency situation or in a remote location.
this is such a great thing for off grid people ! and I have always wondered about a steam turbine to power things like an electricity generator etc .
great, thanks for posting. I like your energy and optimism, you're a good inspiration for other young folks!!
I have a feeling I’m going to need to watch this a few times to fully understand it, and then a few more times to even begin to try to build this.
stop trying at life
@@youvebeenspooked What a stupid comment
@@Inisfad yeah actually agreed, sorry.
One of the best gasafier videos I've seen.
Good job with reused materials.
I have watched a few wood burning gasifiers being made yours was simply and informative (Thanks)
Incredible inspiration. You're drawing was great. And the #10 it worked perfectly. Your shop skills are impeccable. Keep on Keeping on.
This is class, good work 👍🏻 definitely making one of these
i think you could do some stick welding to streamline some of this. You can stick weld with a few car batteries, jumper cable, and some welding rod. Just about anyone should be able to come up with that unless stranded on a deserted island. lol
You are an amazing engineer. I watched the whole video. Thank you!! Just incredible.
Lot of useful info, tips and “gettin’ it done” - down on the farm, bravado! Super clean presentation (great audio and pro voice narration)... Dude!! I’m all in!
That was really good, if you could make a unit that you would sell as a kit, I would want one.
Mm
.😴😴
He does it’s called this video
I agree, please add to cart 🛒
the actual system, the DIY tips and process, the clean explanation, the android phone, the puns is just art in the making^^ hehehe kudos~!
Nice job good to see young folks doing work and teaching others
thank you for sharing! Firing on all cylinders!
Bravo, really excellent and timely! I can see this being very useful for topping up a battery system.
I imagine that, given a constant fan speed, and manually adjusting the oxygen intake at the generator, the generator will only provide consistent voltage in a narrow load band.
oh yeah? ya build one? lol
I was thinking that the generator could be connected to batteries as well for a more consistent delivery.
It's clear no one should voice a new thought around you. You seem to take that as an attack. @@youvebeenspooked
@@edmartin875I feel where you're coming from. If you were to voice this thought to me in person, I would be really excited, and invite you to spend hours with me going over the physics of the combustion and electrical power generation options and electrochemical power storage options, as well as how to include a reasonable safety factor. Burn it in a piston engine or a turbine? That would be fun!
But no, I don't have much patience for people on the internet who "imagine" things that are well understood and could be easily studied.
My bad, I should be more patient, honestly. Cheers mate.
Great video it’s the simplest gasifier build I’ve seen yet however bolting that lid down on the pressure pot isn’t the best idea if somehow too much oxygen got into the reactor it’s a good idea to have a failsafe using some kind of spring loaded mechanism to hold the lid on is always a good idea on any gasifier
wym i thought everyone in america loves a pressure cooker bomb?
Thank you! Great design. I decided to look for a book with paper plans for a wood gasifier, as I am old, and did a search. I found pdfs from FEMA, UN, and Ice Age Farmer. Downloaded and will print up. Will still look for more.
This is f-in incredible!
Thank you for the very informative step by step process.
I've known this to be possible for quite sometime.
Didn't know it to be this easy!
I really like this design and i think i will use a lot of the same ideas in my own.
do it u wont
@@youvebeenspooked ?
Wow. This is absolutely great thanks man! With the way things are going people may very well need this old school tech again.
Dude you are the man! I dont have a welder and ive been trying to figure out a frame design for a vibrating shaker table for about a week now.
Thank you so much! I will be giving this a try!!!
This gonna be great for bugout motorhome setup for when SHTF
TS has already HTF... we're just easing into the end result.
need to see how long will that fuel last. such an interesting project!
25 pounds of wood equal 1us gal. Of gas pine is the best wood to use creates the most wood gas or sin gas
@@reverendlawrence7584 Gas is not mearsured in gallons. But good try. 5kg/litre. UK measurement
@@onekycarscanners6002
I believe he means 1gallon gasoline
Dude, stop apologizing so much. You are showing/teaching people how to create their own electricity or fuel to generate different forms of energy.
The knowledge is much appreciated. Thanks for “How to”.
Cant wait to do this!! THANK YOU!!