Vessel Maintenance Procedure in Refinery and Petrochemical in Shutdown |

Vessel Maintenance Procedure in Refinery and Petrochemical in Shutdown | @sonusinghrefinery
In this video we have deeply described the maintenance procedure of vessel Maintenance in any shutdown of refinery or petrochemical. This will be helpful for the client interview for selection as a mechanical engineer, supervisor, foreman or Fitter.
Pressure Vessel Work Scope in Pre-Shutdown Shutdown and Post-Shutdown
Pressure Vessel Work Scope in Pre-Shutdown to Post-Shutdown for Engineers, Supervisors and Foreman
Download Pdf-
sonusinghrefinery.com/vessel-...
Visit us on www.sonusinghrefinery.com for latest Post and Free PDF
Follow us on Instagram - / sonusinghrefinery
We make videos related oil and gas refinery maintenance and shutdown jobs topic, here we presented some videos please go and check it out. Other Videos playlist you can watch click on below link...
Refinery, Shutdown, Maintenance, Oil & Gas, Piping: • Refinery, Shutdown, Ma...
Piping Related Videos: • Piping Related Videos
Complete Heat Exchanger: • Complete Heat Exchanger

[@nafeesalam8587]

Good explanation ❤❤❤

[@SoNuSiNgHRefinery]

Thanks brother keep support and subscribe to our new channel @pipingcorner where we will share a lot of things

[@nayanwaghmare639]

I will going on abroad in mechanical technician now am going in mechanical foreman thanks to you ❤

[@SoNuSiNgHRefinery]

Congratulations 👏 keep supporting

[@kiranchennakka7593]

Hai bro

[@sarfrajalam4885]

All clear from my side...nice technique to explain

[@vaibhavmore4862]

Sonu bhai bahut pyaar se samjhate h aap aur samjh me bhi aata h 😊Good 👍

[@mdkamran4458]

Thanks a lot sir, keep making videos. It's too beneficial for us.

[@SoNuSiNgHRefinery]

Thanks sure I'll

[@FaisalPlan]

Very good explanation Sonu bhai...👌, I always follow you and many things i learnt from your presentation...🙏
Some time, in vessel scope, there is Hydrotest (LG/LT line) or pneumatic test required for Nozzle RF Pad by client
It would be better to include in Post TA, House keeping after completion of any activity or task as always there will be Hazard which is mandatory to remove from site / location, like any sludge to be shift at designated area, Old demister to be removed, any mechanical fittings or parts, all hoses to be arranged properly, manifold to be removed, barrication to be removed after handing over of equipment or after start up of unit and good to share the lesson learn to their seniors (Foremen / Supervisor / Engineer / Manager) for next opportunity.
Thanks...🤝

[@SoNuSiNgHRefinery]

Thank you for your informative comments, sure I'll include next time all these points

[@Rizwanansari-mw2cr]

Yes sir same sis trah aap ek coulam ka video v bnaeye kafi acha knowledge mil Rahi hai aapki ye long video se

[@nkhan1484]

Bhai apka video bahut he usefull hota hai or smjhane ka tarika usse v jyada accha

[@SoNuSiNgHRefinery]

Thanks for comment please share and subscribe our new channel @pipingcorner

[@deepuchennikkara6211]

Good

[@nayanwaghmare639]

Your very helpful sir❤❤

[@manishsingh5566]

Excellent

[@malikstodio8193]

Good work

[@Amazing.5531]

Superb explanation lots of love ❤

[@SoNuSiNgHRefinery]

Thanks for the support please share

[@sohailrizwani7591]

Thanks🙏

[@anish3091]

Good explanation ❤❤

[@SoNuSiNgHRefinery]

Thank you 🙂

[@PrettyKittens2M]

Boiler kay baray main bhi banaye ap videos plzzzz

[@SoNuSiNgHRefinery]

Ok

[@uamam3436]

Superb service sir
God bless you ❤

[@SoNuSiNgHRefinery]

Need support guys please share with other people

[@uamam3436]

Definitely sir ❤

[@mobashshirislam]

Sonu bhai jaise vessel aur exchanger ka full detail video banaye hain same iss type ka coloum, heater,Fin fan ka bhi banaiye.shukuriya bhai

[@SoNuSiNgHRefinery]

Column ka bhi h ek baar check kijiye

[@mobashshirislam]

@@SoNuSiNgHRefinery mil gya Alhamdulillah good job bade bhai

[@angadYadav-pr7mk]

Sonu sir aap bahut accha explain karte hai thanks
Sir please make video at occuring problem in all static equipment like collumn,heat exchanger,fin furnace ,fin fan and plate type heat exchanger etc. And their solutions please sir

[@SoNuSiNgHRefinery]

Sure brother

[@PrettyKittens2M]

❤

[@zaidashfaq9821]

Bhai 😍😍😍😍😍😍

[@ateeqahmedmalik4176]

Sonu Bhai AP ne energy isolation k bare main nh bataya , mera question ye th k isolation scaffolding se pwhle krte Hain ya scaffolding k bad ...

[@SoNuSiNgHRefinery]

Agar nozzle height per h to pahle scaffolding erection hoga then isolation hoga...
Thanks for your question

[@MohammadAli-md2gp]

Sir manway open krne k baad , Vessel ke entry krne se pahle confined space work permit ki jarurat parti hai na.
Vessel ke baahar hole watcher v hota h.

[@SoNuSiNgHRefinery]

Ha ji

[@abcfuh]

Sir Reactor ke bare me video banaye

[@shoaibrahman3668]

Sir sara procedure hone ke bad iska pressure test kaise kaise hota hai

[@SoNuSiNgHRefinery]

Hydrotest Kiya jata hai

[@motivationalthoughts7380]

Boxup k liye kon sa gasket use krenge. Reply in details

[@SoNuSiNgHRefinery]

Mostly I've seen Spiral wound gasket used

[@rajkumarsingh-mw7sd]

Bhaiya P& id pe video banaiye

[@sohailrizwani7591]

Sir hum b tech mechanical engineering 2022 may complete kiya hu aur india may 2 years line pipe and ndt ka job kiya hu kya hum safty osha course kar k gulf k leye permit reciver may try kr sakta hu

[@SoNuSiNgHRefinery]

NEBOSH shi rhega

[@shankarpandit3212]

Alternation and Reriting kya hota hai sir

[@nasimactingandfitness4152]

Sir heat exchanger me kaun sa gasket use hota h

[@SoNuSiNgHRefinery]

Can you please watch the heat exchanger playlist video

[@tanveermsy281]

Sonu bhai shutdown interview Dene ke liye kya kya padna jaroori hai jisse interview clear ho jaye

[@SoNuSiNgHRefinery]

Heat exchanger, column, vessel, basic safety, basic piping

[@allinone544]

Apne bare mein ap video banao sir

[@SoNuSiNgHRefinery]

Sure

[@chhotustar101]

Vessel fitter ka kam kya kya hota hai sonu bhaiya

[@aatifraza4781]

will we use D-40 as a derusting material.. if no then pls told the name of that chemical

[@SoNuSiNgHRefinery]

There are so many products available we use mostly rustolene instead of d-40

[@aatifraza4781]

@SoNuSiNgHRefinery thanks for your reply bro love from Saudi arabia

[@SoNuSiNgHRefinery]

No problem 😃

[@SUDHANSHUKUMAR-xd9iy]

Heater ka hydro test kase krte hai❤

[@SoNuSiNgHRefinery]

Heater ka hydrotest pass wise Kiya jata like agar 4 pass h to ek ek pass karke alag alag karna hoga. Pass means number of inlet outlet lines going inside the heater.

[@SUDHANSHUKUMAR-xd9iy]

Thanks bhaiya ji
Aapki hi video dekhe ke hm kuwait me mechanical tech me aaya hu
Thank you very much 💕💕💕💕💕

[@tejkumargautam6145]

Column video complete

[@SoNuSiNgHRefinery]

Okay

[@venkateshmasur7815]

VT,UT,PT bare mai nahi bataya aapane sonu ji

[@kamranrao7500]

Sir Q c waly ko higher krny kai liy koi documents chaeay hoty hen?

[@SoNuSiNgHRefinery]

I don't understand what you want to say. Please say it again

[@kamranrao7500]

@@SoNuSiNgHRefinery sir jb ham internal Inspection kai liy QC team ko bulaaty hen.QC ko bulaanay kaa kiya method ha koi paper work hota ha kiya?

[@SoNuSiNgHRefinery]

@@kamranrao7500 Ha inspection sheet hota h but aapko nhi Lana hota h wo QC inspector ke pass hota Jo inspection ke baad client ka sign leta h

[@kamranrao7500]

@@SoNuSiNgHRefinery thanx Sir G

[@jackali6400]

Drain and vent of vessel ka discuss kiya nahi sir jee

[@SoNuSiNgHRefinery]

Good catch bro... Wo actually operation ka part h mechanical team ka role kuchh khash nhi hota h bas jarurat ho to manpower de dete h but that's good point before starting vessel should be properly drained and vented 👍

[@kamranrao7500]

Thora saa btaa du comments mai hii

[@lakshmananm3292]

Tank related needs sir... like vessel 🎉🎉🎉

[@SoNuSiNgHRefinery]

Yes we do

[@badityavasanta8838]

❤

[@shankarpandit3212]

Alternation and Reriting kya hota hai sir