Window Tint Application for an Infinity Mirror

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 มี.ค. 2016
  • Applying plastic window tinting material to glass

ความคิดเห็น • 40

  • @jkoz292
    @jkoz292 4 ปีที่แล้ว +1

    Just did my first attempt and have to redo. I couldnt get the outter edges to seal. Then I kinda freaked out that the adhesive was going to lose its effect so I pressed far to hard and scratched the film. Ha. Luckily I purchased alot from Home Depot as a privacy window mirror film and have more to work with. Thank you for taking the time to make the video. I appreciate your technique on working from the middle of the glass and working the bubbles from the the inside first and then out. Looked very nice when you were done and you stayed very calm. Ill try to do that on the next one. Ha. Oh and I liked how you wet the table when removing the film. Going to definitley do that also! Nice work!

  • @mhenhawke5093
    @mhenhawke5093 2 ปีที่แล้ว +1

    A squeegee works well for putting down the film, just spray it with the soapy water to help it glide along the glass. The plastic wedge or credit card could scratch the film.

  • @OupaPitter
    @OupaPitter 5 หลายเดือนก่อน

    Which one would you recomment, 80% blocking or 80% light allowing or 70% blocking or 70% light allowing

  • @lLykaLyksl
    @lLykaLyksl 7 ปีที่แล้ว

    Am dreading this. Never done it before. Need to get the tiny first so maybe over the next two days

    • @PowerOn-
      @PowerOn-  7 ปีที่แล้ว +3

      ....be brave and have a go! Cleanliness is a key factor. Also, whilst the film dries out over the coming days don't worry if it goes a bit cloudy - thes blotches will disappear.

  • @jardelfranco
    @jardelfranco 7 ปีที่แล้ว

    ola qual lista de material pra fazer isso???

  • @v.studio7918
    @v.studio7918 6 ปีที่แล้ว

    mst hai bhai wa muna wa

  • @NoName-hh3pr
    @NoName-hh3pr 5 ปีที่แล้ว

    Will this work with frosted glass? Is there such thing as a mirror film? I'd like to make our frosted glass divider into a mirror. Could that be possible? Haha.

    • @PowerOn-
      @PowerOn-  5 ปีที่แล้ว +1

      No not really - frosted glass will diffuse any reflected image - you should see colours but no definable "shape"

  • @markellospapadakis4520
    @markellospapadakis4520 5 ปีที่แล้ว

    i have a crack in my glass, but it is even, i want to use it for my magic mirror project, or will be visible ?

    • @PowerOn-
      @PowerOn-  5 ปีที่แล้ว +1

      I think it will be visible...but maybe that will add to the 'magic' of an infinity mirror...😀

  • @kikiladd402
    @kikiladd402 6 ปีที่แล้ว +1

    this gave me a super cool idea for a diy headboard upgrade

    • @PowerOn-
      @PowerOn-  6 ปีที่แล้ว

      Ok cool.......show us the results when you've done it!

  • @rutgeroomkes
    @rutgeroomkes 3 ปีที่แล้ว +1

    very helpfull. thank you very much

  • @mhenhawke5093
    @mhenhawke5093 2 ปีที่แล้ว

    You should mention at 10:50 when cutting the excess film off to use a new blade because the film will dull it quickly.

  • @JOSHHMusic
    @JOSHHMusic 6 ปีที่แล้ว +2

    will this work on acrylic?

    • @PowerOn-
      @PowerOn-  6 ปีที่แล้ว +1

      JOSHH Music Yes it should work fine.....although not done it myself!

  • @daciasdiy1861
    @daciasdiy1861 3 ปีที่แล้ว

    But u didn’t make the mirror? Did u apply the tint on both sides

    • @PowerOn-
      @PowerOn-  3 ปีที่แล้ว

      No I didn't make the mirror, that material is cheap and easy to buy already cut to the size you want..

  • @abubbam
    @abubbam 8 ปีที่แล้ว

    have you ever tried using non mirrored window tint on an infinity mirror?

    • @PowerOn-
      @PowerOn-  8 ปีที่แล้ว

      Hi Austin - no not tried a non-mirrored tint, I'm guessing the reflections would not be propagated in the same way and the look would just be dim LED's? But as I say I'm guessing.
      Simon

    • @Therealrileyb
      @Therealrileyb 7 ปีที่แล้ว

      Austin Milby I'm also keen to know if this works. If you just used the clear glass you do get two or three layers from the light reflection, I've seen mirror tint amplifies this to more layers. So I'm guessing any window tint will give some reflective layers but the mirror works best. Did you try this in the end? What was your results if so?

    • @abubbam
      @abubbam 7 ปีที่แล้ว

      i end up buying a 15 ft role of mirror tent for a house to do a 6inx8in mirror. not very cost effective.

    • @Therealrileyb
      @Therealrileyb 7 ปีที่แล้ว +2

      Austin Milby I've just purchased some 20% silver window tint on eBay. It is effective but I do find I can see through the tint and clearly see the LED strips. However this isn't that bad it just not the perfect mirror finish I was after. I have found better results from this though and compared to the tint before which was chrome tint the feel and quality seems much better and works better as a mirror than the chrome tint which was blurry. I could only buy 50cm by 1m rolls which was about double what I needed but I will keep it for other smaller projects. Someone should test these tints and do a comparison I bet they would get loads of visitors to their site as it's never explained in detail on any guides.

    • @sanjaypatil1599
      @sanjaypatil1599 7 ปีที่แล้ว +2

      what is name that black sheet you used
      tell me all list of matterials plzzzzzz....

  • @meltingpotmeme6181
    @meltingpotmeme6181 6 ปีที่แล้ว

    Nice work tho

  • @steveowens954
    @steveowens954 5 ปีที่แล้ว

    mix soap with distilled water

  • @rmyc
    @rmyc 7 ปีที่แล้ว +1

    Can you do it with 70% mirror tint?

    • @PowerOn-
      @PowerOn-  7 ปีที่แล้ว

      rmyc Yes 70% will work. The affect will be slightly different from the 80% film in that with the lower reflection you will end up with less visible reflections but the initial reflections will be brighter😎

    • @rmyc
      @rmyc 7 ปีที่แล้ว

      Simon Jowett did u use 80% blocking or 80% light allowing. I know in some regions the numbering is reversed

    • @mkobd
      @mkobd 5 ปีที่แล้ว

      rmyc this is what I need to know but apparently no one wants to answer this question

    • @mkobd
      @mkobd 5 ปีที่แล้ว

      Simon Jowett 80% what? Light transmission or light blocking? It makes a huge difference can you clarify?

  • @robertnitschke89
    @robertnitschke89 5 ปีที่แล้ว +1

    Which side faces the lights?

    • @PowerOn-
      @PowerOn-  5 ปีที่แล้ว

      Hi Robert. The film goes on the inside of an infinity mirror frame, so it's closest to the led's. Thanks for your comment.

  • @andreastofias1337
    @andreastofias1337 6 หลายเดือนก่อน

    Can I use Normal mirror sir? Let me know please thank you

    • @PowerOn-
      @PowerOn-  6 หลายเดือนก่อน

      Yes, start woth any normal mirror then apply the film

    • @andreastofias1337
      @andreastofias1337 6 หลายเดือนก่อน

      @@PowerOn- what film sir?

  • @crispaker
    @crispaker 6 ปีที่แล้ว

    link for the tint pls, thnx

    • @PowerOn-
      @PowerOn-  6 ปีที่แล้ว

      Cris Noel Dimpoy I'm located in Australia. I bought my film from www.polyfilm.com.au