Yes b/c as I mentioned there's no logo on this cup so I don't need to try to center the engraved design off anything. The reason for the tape is placement, but in this case the placement really doesn't matter.
I love your videos and how you explain everything. I have a question, can I just turn the air assist off or do I really need to disconnect?? Thank you!!
Hi Melissa, I am following all your videos as I set up and learning about my m1. Mi ritarobtool did not bring the measuring tape, do you know if there is an svg I can print and use please?
Hi there! I have the same machine and have been trying to engrave a yeti tumbler but for some reason my designs aren’t coming out . Do you have suggestions
These tumblers I just picked up at Target but I usually get tumblers at Save a Cup. Here's a link www.saveacup.com/#a_aid=silhouetteschool&a_bid=64519456
Does this machine need to be vented by a window? I’m in a hot climate and I really can’t be opening windows right now so I’m wondering what people do for that.
I did my first today & it was a success!!! Of coarse I am finding your video now. Thanks so much!!!! You are the best
You are so welcome!
I finally broke down and did one and I love it! Now onto harder ones! thanks for the tutorial!
You are so welcome!
Thank you so much for this! I’ve spent HOURS trying to figure out what the best laser cutter/engraver is for tumblers and cups
Glad I could help!
What’s the largest size tumbler you can engrave with this machine? Will it do 40oz tumblers?
Do you have a video on engraving a full wrap on a stanley with the M1
I haven't released it yet
Would love to see it!
FYI if you want to get the soot really cleaned off on the finished work, Dawn Power Wash works wonders.
Doesn't the green line have an "engraving" at that spot the whole time? i did mine like that and when I frame, it seems to do just that
Thank you so much! I have seen other videos and they put like tape before and after where the design will go. I see you didn't. Can you explain?
Yes b/c as I mentioned there's no logo on this cup so I don't need to try to center the engraved design off anything. The reason for the tape is placement, but in this case the placement really doesn't matter.
I didn't' get the tape measure that has the end to identify what I need to use where can I find that?
I love your videos and how you explain everything. I have a question, can I just turn the air assist off or do I really need to disconnect?? Thank you!!
You can just turn it off and on. If you don't want to keep it in position you can set the cap part into the holder on the side of the laser module
Hi Melissa, I am following all your videos as I set up and learning about my m1. Mi ritarobtool did not bring the measuring tape, do you know if there is an svg I can print and use please?
i'm not sure about an SVG but I would reach out to xTool and tell them you have a part missing and hopefully they will send it.
Can you do a video cutting vinyl do I have to remove the riser & honey comb to work with print and cut & vinyl??
When you cut with the blade you want to use the cutting mat.
Hi there! I have the same machine and have been trying to engrave a yeti tumbler but for some reason my designs aren’t coming out . Do you have suggestions
Is it in focus and do you have enough power?
Where is the link to buy the tumblers
These tumblers I just picked up at Target but I usually get tumblers at Save a Cup. Here's a link www.saveacup.com/#a_aid=silhouetteschool&a_bid=64519456
Does this machine need to be vented by a window? I’m in a hot climate and I really can’t be opening windows right now so I’m wondering what people do for that.
There is a smoke purifier attachment that can be purchased.
If it’s not going threw do I need more power?
I'm not sure I understand your question. What is not going through?
Also, I can't find the video on connecting to wi-fi. Thanks. :)
Hey there! It's coming soon!
My rotary didn’t come with the end piece is it sold separately
I believe they are supposed to come together.
Do you leave your riser in place all the time even when you're not using the rotary attachment?
Yes
My rotary didn’t come with the clear ruler & doesn’t show it in the manual either. Is this a mistake?
The clear ruler came with the M1, not the rotary.
The clear ruler comes with the riser base/ honeycomb. If you search you can find the Xtool project for the focus adjustment ruler to make yourself.
Hi, I’m having issues with my portrait 3, tool is awaiting connection, not sure what to do
Hey there, I’d make sure your software and firmware are up to date.
Is there a compatible air filter system for this?
Yes amzn.to/47aSuIS
Have you done golf balls?
I haven’t yet!
Can the M1 engrave on clear acrylic sheets?
No it can not.
There are other TH-cam videos that show how you can engrave on clear acrylic with this machine. Only engrave, it will not cut.
Can sublimation/sublimated tumblers be engraved?
I haven't tried it..but you certainly could
@@SilhouetteSchool would love to see a tutorial video of a 20oz =)
cant wait for that one! you make everything so easy! @@SilhouetteSchool
1 pm, Pacific time?
1 pm eastern time, 10 am Pacific
Hello!! Can you make videos with the p2 please! ❤️ love how easy you make everything
Just gonna leave this right here 😉 th-cam.com/play/PLT9hB3BOKb_gpngQmN2r035Q0FC3Lqgkx.html