𝐓𝐀𝐌𝐀𝐆𝐀𝐖𝐀 𝐑𝐞𝐬𝐨𝐥𝐯𝐞𝐫 𝐩𝐫𝐢𝐦𝐚𝐫𝐲 𝐚𝐧𝐝 𝐬𝐞𝐜𝐨𝐧𝐝𝐚𝐫𝐲 𝐮𝐧𝐢𝐭 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐦𝐞𝐧𝐭 | 𝐒𝐦𝐚𝐫𝐭𝐬𝐲𝐧 𝐓𝐒𝟐𝟔𝟓𝟏𝐍𝟏𝟒𝟏𝐄𝟕𝟖

𝙏𝘼𝙈𝘼𝙂𝘼𝙒𝘼 𝙍𝙚𝙨𝙤𝙡𝙫𝙚𝙧 𝙥𝙧𝙞𝙢𝙖𝙧𝙮 𝙖𝙣𝙙 𝙨𝙚𝙘𝙤𝙣𝙙𝙖𝙧𝙮 𝙪𝙣𝙞𝙩 𝙢𝙚𝙖𝙨𝙪𝙧𝙚𝙢𝙚𝙣𝙩 | 𝙎𝙢𝙖𝙧𝙩𝙨𝙮𝙣 𝙏𝙎2651𝙉141𝙀78
@FlowChart
Like👍 & Subscribe👆 for more🥰
• 𝐓𝐀𝐌𝐀𝐆𝐀𝐖𝐀 𝐑𝐞𝐬𝐨𝐥𝐯𝐞𝐫 𝐩𝐫𝐢𝐦...
#Tamagawa #Smartsyn #Resolver #Encoder #Bruckner #Industry #electronics #electrical #flowchart #Engineer
TAMAGAWA Smartsyn RESOLVERS TS2651N141E78
MEET YOUR NEEDS IN MOTION CONTROL APPLICATIONS
Wide Range of Built-in types for Direct Mounting onto Motors
PRINCIPLE: Resolver is a rotary transformer, which outputs AC voltage in accordance with angular position of the shaft. There are two types of resolvers, BRX and BRT, having different types of winding.
BRX resolver is excited by AC voltage to the rotor winding, and outputs from the stator windings sine and cosine voltages proportion to the rotation angle θ.
BRT resolver is excited by sine and cosine voltages to the stator windings, and outputs from the rotor winding a sine voltage phase-shifted in proportion to θ.
APPLICATIONS: For Driving Robot Hand and Body, Applicable to the roller positioning control of rolling mills, reliable at high speed are suitable for numerical control systems.
#Electrical
#Electronics
#technology
#repairing
#Services
#engineering
#tech
#howto
#testing
#machine
#industry
#maintenances

[@elmnaoirfer3751]

If we set 7 volts in the primary coil, what will be the peak voltage in the cosine coil at angle zero Is it 7 volts or less? The rule to find out the peak voltage at angle zero is as follows (peak potential of the cosine signal = voltage on the input coil x cosine of angle sita) (V cosine=Vr x cos cita)

[@FlowChart]

Follow user manual

[@elmnaoirfer3751]

Hello, how do I know the engine speed, and the position as well, do you have some equations, thanks a lot

[@FlowChart]

Welcome, you can use speed sensor as manufacturer suggestion

[@ghouseahmed4u]

Hi sir, what should be the resistance between black color cable and resolver body?

[@FlowChart]

Sorry sir, I wasn’t test it. Try to next. Stay with Flow Chart. Thank you

[@ghouseahmed4u]

@@FlowChart Thank you for the explanation, actually i cross checked the resistance, it should be as per the datasheet of manufacturer who specifies the resistance and impedance of circuit.

[@FlowChart]

Welcome

[@amirulzianuar8179]

What is type of bearing for this resolver??

[@FlowChart]

SKF 61804-2RS1

[@tommills9631]

@@FlowChart If the resolver Primary/Secondary/Reference coils are good but the bearing has failed...is it possible to replace the bearing?

[@rahulromeo8454]

​@@tommills9631yes

[@pistonhood9220]

Can I contact you please , I have some questions!🙏

[@FlowChart]

Text plz

[@pistonhood9220]

@@FlowChart can have your number , where should I text you ?

[@rahulromeo8454]

​@@FlowCharthow to check encoder please make video