hELLO, Love this video, i wanted to ask a 3 questions: 1) for the sake of safety if i wanted to reproduce this experiment or operation, how would i safely connect ac power to the copper wires? i know you mentioned a amplifier but are you also using a bread board, aligator clips, etc.? i tried wiith a bread board and 9v power supply that came with the breadboard and i started smelling smoke so i stopped. I know you told us your setup verbally about what is happening off screen but i struggle to imagine what the connections look like as i am a visual person. 2) Do you think this experiment would be possible to do with magnetized beyblades? I plan to try to reproduce your results but with bey blades and a few other add on since my channel is center around music. 3) Also the copper coil seems to be inside of some bronze dish curious what that is? and the role it plays if any (maybe as a ground?) Thank you for your time!
1) You connect the coil to an audio amplifiers output just like a regular speaker. The audio amplifier gets its signal from a signal generator. 2) That could work in theory, but is surely hard to actually make it work. 3) The copper coil is inside a 3D printed plastic holder, that is just to make it easier to wind the coil.
Very thought provoking, excellent channel. Wonder what would happen if you reversed the experiment and generated power using the pattern and frequency that works best with this coil arrangement? would we see any power gains, would less torque be required.. etc
If you use magnetic spheres. A large one in the center and smaller ones on the wings. Like 5mm and 4mm magnets. It will be easier to spin as it's rotating on a single spot.
The sun, planets and moons. Mutual mass acceleration. Electromagnetism at it's finest. So what is gravity? An attribute of electromagnetism? What did Tesla say, think in terms of energy, frequency and vibration!
Why does it precess at first, and it precess at circle motion, so it shows shape, that means all shape that you see is depend on precess, which back and forth motion, so why there is back and forth motion, so that means there is a polor that is left and right, and the center, so polor of north and north, so cause the center to be nothing that is non-density or non-magnet flux, base on other video that is year later from now, so the center is non-energy. So, all it comes down two which two is opposite that is 1 and 1, and 1 in center, so all in total that's 3. So, start, middle, end. So, the magnet has the middle which is non-magnet flux, so in relative to higher flux on all side that circle which the center has a radius that is even, so precess is the center is being push and pull at same time base on volt that you input as herz so high volt or herz means back and forth volt, so is the volt on which you put magnet at first, so 0 herz or 1 herz?? So, the precess is base on herz, not base on magnet?? Which magnet is one direction like one finger in front of me, so one finger with palm that is back, so you turn one finger, so that one finger change to back of me and palm is front of me, so by perspective so base direction which is circle, so one direction base on center, so the key is center, not direction, but out of center, out of one, out of anything, so the point is out of something so in your perspective one direction that is circle is base on the center. Zero current, but zero current has power so that is Aether so the mass which you pick up as magnet and with magnet show magnet field beyond the zero which is current, so Aether is power, well, not power alone, but power relative to edge, so require edge so there is center to be called, after all, you can't have middle without end and start, so the edge is magnet and center of magnet is zero magnet flux which is two radius furthest from edge. Well, the irony that the edge has non-pressure which up is non-exist that is non-magnet, yet the edge has high power so it is base on two different like fire which you have air and another mass, so both interact so it becomes fire so which is pressure so the air is feeding the fire as there's still air there to create pressure, so not feeding as to eat or as to consume, but to pressure, so the magnet with zero center is high pressure from left and right of center. When you put 5 magnet, so there is 4 center which is bigger gap than smaller gap that is within 5 magnet so that magnet center that is 5 relative to 4 center that is a gap so between 5 magnet, so smaller is creating pressure to bigger gap so the gap get smaller so it rotates faster. So, Logically more magnet means more gap that shink at center at gap so you need smaller pin to go thru since there is higher energy on left and right of center, the gap and include magnet center is higher as well. Can provideo more explain at description so what is herz and what's process and herz and process is link or not?? Since the herz part with the already exist volt, so the volt is already on even the herz is low so the magnet move. Which is frequently that is circle direction relative to center that produce same direction outward so. So, that means the herz has the edge and the center so the magnet which spin is same principle as the herz, which represent the three as 1 1 1.
This is pure Tesla level experiment! Really eye opening and food for thought. Thank you.
What is the amperage your using? And number of windings?
hELLO,
Love this video, i wanted to ask a 3 questions:
1) for the sake of safety if i wanted to reproduce this experiment or operation, how would i safely connect ac power to the copper wires? i know you mentioned a amplifier but are you also using a bread board, aligator clips, etc.? i tried wiith a bread board and 9v power supply that came with the breadboard and i started smelling smoke so i stopped. I know you told us your setup verbally about what is happening off screen but i struggle to imagine what the connections look like as i am a visual person.
2) Do you think this experiment would be possible to do with magnetized beyblades? I plan to try to reproduce your results but with bey blades and a few other add on since my channel is center around music.
3) Also the copper coil seems to be inside of some bronze dish curious what that is? and the role it plays if any (maybe as a ground?)
Thank you for your time!
1) You connect the coil to an audio amplifiers output just like a regular speaker. The audio amplifier gets its signal from a signal generator.
2) That could work in theory, but is surely hard to actually make it work.
3) The copper coil is inside a 3D printed plastic holder, that is just to make it easier to wind the coil.
@@OmegaZZ111 thank you
So, with 5 magnets rotate clockwise and 3 magnets or 2 iron pieces rotate contra clockwise
Very thought provoking, excellent channel. Wonder what would happen if you reversed the experiment and generated power using the pattern and frequency that works best with this coil arrangement? would we see any power gains, would less torque be required.. etc
If you use magnetic spheres. A large one in the center and smaller ones on the wings. Like 5mm and 4mm magnets. It will be easier to spin as it's rotating on a single spot.
Yes they are much easier to get to spin, but at higher rotation speed they somehow tend to shoot out much earlier than the cube magnets.
Super interesting. Is this related in any to the lamore frequency?
I am not sure, but I think the precession of the magnet is due to gyromagnetic precession (the Larmorfrequency)
@@OmegaZZ111 ja that is what I meant :)
The sun, planets and moons. Mutual mass acceleration. Electromagnetism at it's finest. So what is gravity? An attribute of electromagnetism? What did Tesla say, think in terms of energy, frequency and vibration!
You're a bad ass .vary inspiring
Do have also have the building plan and stl file please? Like your projects a lot❤
thats how you make an alien spaceship.
Sehr interessant 👍🏼
like Tesla's egg of Columbus, this is awesome 😮
The plane-T⭕️roidal formed eart(H)eart with the levitation plasma sun and moon 🤗
Why does it precess at first, and it precess at circle motion, so it shows shape, that means all shape that you see is depend on precess, which back and forth motion, so why there is back and forth motion, so that means there is a polor that is left and right, and the center, so polor of north and north, so cause the center to be nothing that is non-density or non-magnet flux, base on other video that is year later from now, so the center is non-energy. So, all it comes down two which two is opposite that is 1 and 1, and 1 in center, so all in total that's 3. So, start, middle, end. So, the magnet has the middle which is non-magnet flux, so in relative to higher flux on all side that circle which the center has a radius that is even, so precess is the center is being push and pull at same time base on volt that you input as herz so high volt or herz means back and forth volt, so is the volt on which you put magnet at first, so 0 herz or 1 herz??
So, the precess is base on herz, not base on magnet?? Which magnet is one direction like one finger in front of me, so one finger with palm that is back, so you turn one finger, so that one finger change to back of me and palm is front of me, so by perspective so base direction which is circle, so one direction base on center, so the key is center, not direction, but out of center, out of one, out of anything, so the point is out of something so in your perspective one direction that is circle is base on the center. Zero current, but zero current has power so that is Aether so the mass which you pick up as magnet and with magnet show magnet field beyond the zero which is current, so Aether is power, well, not power alone, but power relative to edge, so require edge so there is center to be called, after all, you can't have middle without end and start, so the edge is magnet and center of magnet is zero magnet flux which is two radius furthest from edge.
Well, the irony that the edge has non-pressure which up is non-exist that is non-magnet, yet the edge has high power so it is base on two different like fire which you have air and another mass, so both interact so it becomes fire so which is pressure so the air is feeding the fire as there's still air there to create pressure, so not feeding as to eat or as to consume, but to pressure, so the magnet with zero center is high pressure from left and right of center. When you put 5 magnet, so there is 4 center which is bigger gap than smaller gap that is within 5 magnet so that magnet center that is 5 relative to 4 center that is a gap so between 5 magnet, so smaller is creating pressure to bigger gap so the gap get smaller so it rotates faster. So, Logically more magnet means more gap that shink at center at gap so you need smaller pin to go thru since there is higher energy on left and right of center, the gap and include magnet center is higher as well.
Can provideo more explain at description so what is herz and what's process and herz and process is link or not?? Since the herz part with the already exist volt, so the volt is already on even the herz is low so the magnet move. Which is frequently that is circle direction relative to center that produce same direction outward so. So, that means the herz has the edge and the center so the magnet which spin is same principle as the herz, which represent the three as 1 1 1.