From South Africa. Thank you so much,cos indeed we are experiencing water shortage, and after watching your video,indeed the tap water was just trickling
pull out Mesh filter wasent dirty but the "2nd mesh" filer behinde the first but its permanent? had some rust gunky, used a wet wipe to remove the rust gunk. Made it a bit better but every 2-3 washes its still a 4c, I tried to use compressed air there now and blew out the inlet pipe will know in 2-4 washes. Hum hope it works now, 2y old....cant handle any dirt in water... i did most suggested things earlier a bit earlier.. it gets 4c only during the rinse/dry cycle. perhaps a pressure drop from pipes was that alot of water in the end? Proboly dirt somewhere inside (Main pipes on road was replaced and repaired after this i had this problem)
Hello , Thank you for this vidio, i have tried all advised bits, but still error comes up. My problem is that i can see water going in to machine and with nice preasure but when drum is top up to half eror comes up and machine is draining, any chance you could advise on that?
The 5D or SUD error code is usually caused by too much detergent, or using the wrong type of detergent. You can watch this video for a solution. th-cam.com/video/mcsnH1gZQ2w/w-d-xo.html
Road to 10k. Kindly support by subscribing, thanks in advance.
Brotha great video, my parents were struggling all day and I did this, it was like daaamnnnnn moment 😂😂
From South Africa. Thank you so much,cos indeed we are experiencing water shortage, and after watching your video,indeed the tap water was just trickling
Thans too
It was the filter for me! Thanks!
Cleaned the filter, thanks ☺️
Thanks for this Video brother, I lived in a house with a weal system the mesh was full of sand.
Well done, thanks! I found with mine, the filter behind the pull-out filter was also clogged. I had to clean out both.
Excellent!
Has really helped me today
Great video, thanks!
Thank you very much, you are on the dot, very helpful,🎉
Thank you. I just fixed it after watching this
Welcome
Thank you it was useful
Thank you for sharing this video..
My pleasure
pull out Mesh filter wasent dirty but the "2nd mesh" filer behinde the first but its permanent? had some rust gunky, used a wet wipe to remove the rust gunk.
Made it a bit better but every 2-3 washes its still a 4c, I tried to use compressed air there now and blew out the inlet pipe will know in 2-4 washes.
Hum hope it works now, 2y old....cant handle any dirt in water... i did most suggested things earlier a bit earlier.. it gets 4c only during the rinse/dry cycle.
perhaps a pressure drop from pipes was that alot of water in the end?
Proboly dirt somewhere inside (Main pipes on road was replaced and repaired after this i had this problem)
Thank You so much 😊
You're welcome!
thanks you bro 👍
Thank you...BIG HELP
Thank you❤️🙏🏻
Nice videos more videos sir
Thanks, stay tuned, more videos coming!
Could you please help on OC error code on this washing machine. Thank you 🙏🏾
Sure, OC error code's two common reasons are faulty water inlet valve or defective water level sensor. I'll be making a video on this soon, thanks
Save my time
Hello my issues is that after pumping water inside the machine It'll drain without washing and the 4C error will pop up
Thank you
Why there is a red key icon when 4c error ?
I check the water supply its fine. I check the host inlet its fine. Still E4 showing
I share my experience with fixing the 4C Error. Hope its of some help, thank you!
Thank you and i appreciate all your videos
Hello , Thank you for this vidio, i have tried all advised bits, but still error comes up.
My problem is that i can see water going in to machine and with nice preasure but when drum is top up to half eror comes up and machine is draining, any chance you could advise on that?
@danielastankowiak8857 Hello how were you able to solve your issue I'm having the same issue too
God bless you
Thanks
Hi, I tried to fix 4C problem and the reason was that the hydrostatic hose was leaking.
It's good you identified the problem
Quick wash वर spin होत नाही, कारण काय?
Ian's Gadget, What Is 4C And 4E?
The 4E (4C) error code indicates that the washing machine has detected a problem with the water supply.
@@iansgadget i have cleaned the filter but still its not working and getting the 4C error.
@@trynet2814me to
No spine
Oooo, ok ,but my samsung washing machine 5d error please help
The 5D or SUD error code is usually caused by too much detergent, or using the wrong type of detergent. You can watch this video for a solution. th-cam.com/video/mcsnH1gZQ2w/w-d-xo.html
9