At first I also had the problem that spruce saplings wouldnt grow, but then I tried this: I placed a few Oak saplings to get the farm going. Without stopping the farm all I did was switching to spruce saplings in my hotbar and voilà, the farm started to work with spruce saplings. So u gotta start with oak or birch saplings and switch to spruce saplings in hotbar. Hope this is helpful for some people, because i got stressed out a lot about not getting spruce wood out of this farm. edit: Don't forget to put the Building block above the block where u grow the sapling. Otherwise the farm might break. Thanks a lot for all the Tutorials Shulkercraft! I am using a lot of your designs in my world and it always comes out as promised. Cheers
Thank you so much for your comment. Mine only worked with oak for some reason but trying your method by simply switching the sapling type after starting with oak without turning the farm off in between absolutely works!!!
This is an excellent farm. If you're making it, it helps to think of it as seperate parts joined together. The TNT dispenser at the top is just on or off, and you can make it seperately on its own for any sort of farm like this. The top of that stack of alternating blocks and redstone torches is just either 'on' or 'off', so you can build the TNT dispenser on its own, with just a switch, to make sure you have it right. The bonemeal dispenser is another seperate part, and the pistons are a third part, with the water collection being redstone-free. I may move the switch for the bonemeal around so it's not dispensing until I get into postion. It's nice to build this near a bonemeal farm or a mob farm. You can also easily decorate this. If you have a drowned farm in your world, using copper block as the building blocks makes it look super fancy and industrial.
If you're using this on a multiplayer server that uses anything like Bukkit, Paper etc., make sure to change allow-headless-pistons to True in the server config! The farm will not duplicate the TNT without this.
im using 1.21.1 version and it was working fine in older version. when i flick the lever the tnt dont drop and the piston arent pushing trees and also the dispenser is full of bonemeal but not dispensing
When you lose 1 Redstone and 1 RS Torch (due to water leakage in the farm): You can see the position in the video at 7:15. It can happen when a block is placed at the Observer Clock. If necessary, the farm must be reset: To do this, attach a switch at the back of the farm (opposite the water) on the piston next to the amplifier (3 Blocks backs from the single chest) and press it. An Another switch must be on the dirt (where the seedling is placed). Press this switch as well (it will then be removed, so collect it). This can happen when a tree grows WITHOUT the farm is on.
for every one who does not work (piston not push or water fall and distroy the redstone) make sure in this min 12:40 this is a slab and not a block, bc of this slab my farm didnt work, but now its works after i change it from block to slab. btw im using 1.20.4 and still works
I was messing with it since yesterday and couldn't figure it out. found this comment and thought i'll check if i placed a block instead of slab, that was it. Thanks dude
IF YOUR PISTON DIDNT PUSH TREE MAKE SURE YOU CHECK 7:19 I HAVE IT GOOD but i mess it because i place oak sapling without block on top MAKE SURE YOU WATCH VIDEO TO END ITS IMPORTNT
A tip for those who can not grow spruce: make sure you have connected the red stones right and have removed all the temporary blocks, especially the dirts put by Enderman in survival mode :)
If this helps anyone having the problem with spruce trees not being pushed, I missed placing a piece of redstone on the slab that he drops onto at 13:40. I missed that he placed a piece of redstone down after removing the temporary block. Hope this helps someone.
Your tutorials are great. I'd really appreciate of you were to explain the basic idea behind the redstone. Having an idea of exactly what the redstone is accomplishing would be very interesting
Well for that you have ilmango he explains everything. Wouldn't be very wise to make a tutorial and explain why it works when most people just want to build the thing
For anyone curious, This works in 1.16.5, tnt duper works at intended, also all the saplings work aswell. Highly recommend this tree farm, I've built a lot over the years and this one by far is the most productive yet cost efficient tree farm out there right now.
If pistons arent working you may have hit the redstone next to sapling spot, make sure its an X not dot. And at 13:40 that you placed a redstone after destroying temp block
Another tip for those who cant get the pistons to push the logs, make sure youre putting the slabs at 13:38 in the right direction. They should be facing right & left, not front and back.
if yall are curious, this farm took me around 50 mins to build, even when i rarely paused the vid, and i didnt make any mistakes when running the farm for the first time, however after a few uses, the sticky pistons on the side pushing the stripped logs was pushed out of place, due to the fact that oak trees can grow in weird shapes, and not just straight up. itwas rlly easy to fix tho, just use pistons to push it back, and replace the redstone. (However even if this happens, the farm will still work, so i rarely fix it either way.) overall, really good and quite easy.
mine started to not push at all the spruce wood for some reason , i thougjt its the leaves so i manually removed all the spruce wood and the leaves but still it grows the trees but dont push thrm , any idea what could be the problem thanks
Oak trees will break this farm when one of the large varieties grows. I fixed this problem by placing a non-movable block like obsidian above the dirt block that you place the sapling on, level with top row of stripped spruce logs of the leaf crushers. This seems to have fixed the issue for me. Now this farm will reliability pump out some oak logs. Nice video and easy to follow build, well done. Cheers!
If you decide to switch to Spruce after running Oak, remove the obsidian block. The farm will run Spruce and Birch just fine. This farm will also run Jungle wood, but you will need to have a large supply of saplings. I moved the Obsidian block up one level above the stripped Spruce leaf crushers. The farm isn't completely lossless, some saplings, sticks, apples, etc. will land around the exterior of the farm. Oak, Spruce, and Birch produce a lot of saplings so the loss can be made up, but I eventually did run out of Jungle saplings. All in all, this farm works and will produce a lot of logs.
For someone who has a problem with spruce saplings check the moment 7:14 with redstone on dirt bc i haven't him and that was a problem. And if this will be your problem you should repair pistons 11:27 and stripped logs 11:47
There is a slight problem with this farm where, at least with spruce trees, the leaves are crushed and the saplings are popped out of the farm completely. You could probably solve this with some hoppers arranged in a ~6 block radius of the farm, but that's A LOT of hoppers to have just to catch the saplings
Works on 1.20.4 guys! If it didn't work for you then you probably did it wrong. And don't skip the Stripped wood part. And also look out for the final part of the video if you are going to use oak sapling...
@@ertyge1 probably did something wrong. The first time I did it, I also did something wrong that's why it didn't work. For me it was that I didn't set a repeater to the correct tick amount. For you, this might be different...
For anyone Wondering the farm works perfectly in 1.20 but if u are playing on a paper/bukkit/purpur etc. It won't work if u don't change a setting in ur server's config
Information from original owner of the farm you have to remove the building block above the dirt where u put the sapling in order to get spruce from the farm This doesnt work in bedrock If Pistons doesnt push logs just try breaking the stipped logs and re placing it on the normal piston( in front of first sticky piston )at a block gap between sticky pistons and stripped logs hope this helps : )
@@Kayzo_07 did this work for you for other logs? bc if this work so for spruce you just need to destroy the block above the dirt where you put the sapling
To all the people that says it does not work it does. theres 1 little redstone that you have to remove, otherwise it wont work. This is awsome good job! (Also Regular Jungle Trees Work!!)
This wood farm is simply awesome! I built a different one on my and my friend's minecraft server and it worked pretty decently, but unfortunatley it did not work with oak wood and whenever i made it destroy oak trees the trees destroyed it and moved a bunch of blocks around... But this farm, on the contrary, doesn't and works well with oak wood! Love this tutorial, well explained, easy to follow! Thanks, Shulkercraft
if your farm is only pushing 3 blocks or spruce not working, then make sure you have that 7:17 redstone dust next to the redstone torch.... the glass near it broke and water spilled and breoke the 2 redstone... but i forgot about the dust. it took me 72 hours to just find that...
Nice farm. I built it with Quartz Bricks as solid blocks and they got blown away by the TNT. You need to use blocks with a higher explosion resistance like the smooth stone he used. At least for the blocks next to the TNT explosion.
I’ve used smooth stones at that part, still some of them gets blown away by the tnt. Also a bit of the dirt blown away on the bottom of the farm, like 4 blocks
Anyone having problems with the logs not being pushed: くまのこ wrote a comment somewhere here in Japanese and I translated it with google, he said you need to interact with the redstone next to the sapling and so I removed an replaced it and now it works perfectly for me! Though idk why 😅
I'm on 1.21.1 too, For some reason the rows of pistons and the wall in the back wont activate, so nothing moves it just grows one tree. I tripled checked the redstone but idk why it wont work
@@bigc327 Sorry man, the only issue i had was the tnt blew up once but i figured out on servers u need the enable setting, dont know much about anything else
Thanks for this. I would love to build it when I have the time. At the same time, one of the more frustrating things about videos like this is that I also want to know WHY it works the way that it does (mostly pertaining to the redstone mechanics). Having to watch the process of, now do this, now do this, is great for in-the-moment building, but it doesn't help me learn the concepts. The underlying concepts are what take this sort of thing from tedious, mysterious, and frustrating to natural and adaptable.
In a nutshell, this machine's mechanics reminds of a printer. So basically, what he build is a wood printer. You have bonemeal feeding contraption at the bottom back of the machine connected with rows of sticky pistons to the left and towards the right squeezing at the sides, so the trees do not grow side thick branches and for oak he puts a block on the top, to prevent from leaf block overgrowing the whole machine (if you do not put the stone block he mentiones at the end, the tree will overgrow the squeezing chamber with leafs, which might displace some of the pistons and crash your machine). And at the very top, you have a TNT duplicator which is perfectly timed with those 4 repeaters to ensure the TNT explodes at the right time to chip away some of the wood logs, which will fall into the water and the water streams taking the logs towards the chests. in addtion as the leafs get crushed, you get SOOOO many saplings in return (so you have an endless supply of them), sticks and apples if you use Oak. Very genious design, thank you
If spruce doesnt grow and oak and birch grow, check if the redstone is placed correctly nest to the pistons that push the tree. This also works if the pistons only push a 3 block high tree to the tnt.
Thanks I was completely dumb founded on what to do. After reading this I got a schematic of the tree farm and turns out I miss placed a piston. Thanks so much for your help😀
personally I had a problem with a piston. The first sticky piston of the double row of pistons was a block further on the left when it must be stuck to the first of the double row of double pistons
IF YOUR TNT DUPER ISN'T WORKING: It doesn't say it anywhere in the video, but the comparator needs to be in subtract mode. Just right click it once in order to get the clock to work properly. This worked for me at least, so I hope it helps you too!
Anyone having the problem with trees not being pushed, try to push the lever to open the farm door so the redstone behind it can light up and check if the redstone is placed correctly forming an x 😊
@@Cr7_theRealG0aI Check again may be the lever placed below the door broke due to water, place it again then it starts working. I also faced the same the problem
@@JonnyChoi77 theres no “more efficiency” or “less efficiency” when it comes to these stuff, it all comes down to the fact that it is nothing but you growing a tree and it getting blown up
I just built this farm in my survival server and it works great! Thank you for the clear tutorial and the video. I recommend building a wither skeleton farm to get all of the bones for bonemeal.
working in vanilla 1.21, i think they might have changed spruce models a bit so spruce saplings feel a bit more scarce, but you can fix that by using oak logs before you start with spruce so the leaves on top of the farm prevent the saplings for falling outside of the farm
I forgot to prevent the tall oak trees from being able to grow, and eventually one grew, which broke the farm, as some others have mentioned would happen. I fixed the water leakage and replaced the redstone and redstone torch, but the double pistons never pull the stripped logs back, meaning they always stay one block away from the piston instead of connected to it. Even when I break them and replace them next to the pistons, the same issue occurs as soon as I turn the farm on and place a sapling. I can't figure out how the pistons that are supposed to push and pull the stripped logs are supposed to be powered, since whenever I try to power them, only the pistons pushing the pistons get powered. My understanding is that the first pistons are supposed to push the other pistons forward, which breaks the leaves, and those pistons are supposed to push the stripped logs forward, which pushes the wood from the tree, but correct me if I'm wrong. If anyone has any ideas or tips, please let me know.
@@cryptrain1271 you have to place a block directly above the dirt block above the level of the stripped logs that push the tree forward. I did not do this at first and my farm broke too I had to rebuild parts of the piston walls and re do the water wall. I have a block there now which should prevent the bigger oaks from spawning.
If you dont want it to break when you put down oak saplings you need to put 1 block above the sapling on top of the farm 1 block higher than the stripped spruce
if u r reading this dont make this farm rather make ianxofour's versatile tree farm. It produces every single tree(except mangrove) including the nether trees and both the red and brown mushrooms. Its efficient productive and easy to build. Thanx for reading this far. Have a good day!
i just checked it. it is easier to make but shulkercrafts design gives as twice as much wood. ianxofour's farm is better for beginners but in late game i would suggest you this one EDIT: i forgot to mention, ianxofour's farm can give you more wood types so keep that in mind :)
I built this farm and noticed that not all wood blocks exploded so i just built the whole tnt contraption one block higher(I built it in 1.21 if that may be the reason), anyway I hope this helps someone put there!
@@JGT_gamer Birch saplings, and also tip for everyone: build this farm on top of your creeper/mob farm if you have one, it's a really nice combo - 2 AFK things!
I love your builds and have used a few of them (especially the cobblestone gen). But can we get a final dimension size for the builds? I like adding buildings around them and it's nice to know how big I need to plan for.
DOES NOT WORK FOR BEDROCK!! tnt doesn't get activated or dupe and no items get pushed into dispenser and dispenser doesn't tick and piston extenders don't work due to different budding mechanic
Great Farm! TRhe only issue I seem to have is that I do not replenish saplings at a fast enough rate to keep up with the farm. I'm not too sure how to fix this as the top blocks can't be solid or else the trees don't work.
for anyone Whose Farm just stops Working I have the solution. The dirt on which you place sapling,next to it theres a redstones make sure that you didnt tight click on it Try right clicking the redstone And it will work
I have not tried it, but looking through the video, I would say 100% not. At 11:23 it shows sticky pistons pushing stick pistons, this only works in Java and not in Bedrock.
@@ysubanime3563Been there, done that, many, many times, thankfully I've learned the most common things you can do in Java that you cannot in Bedrock so always watch such a video in full before attempting a build. Sometimes you can tweak a design to work in Bedrock, but sadly if a sticky is required to push another sticky, there is no workaround in Bedrock. I can only advise that unless it says Bedrock in the title or description always skim the comments before you start.
Items are overflowing everywhere on the ground!!The trickiest part of this farm is building then slabs with the redstones.But its worth it.I strongly recommened to build this farm.For now,I can enjoy with my loads of loada of blocks.Well done shulker craft. . . . .Your huge fan!
This farm is really good, but i have a problem with saplings, for some reason the farm uses more saplings then it produces, and i getting out off saplings quickly. Any ideas of fixing that?
probably one side of the stripped logs is not breaking the leaves. I couldnt tell you how to fix that because that is the problem I am dealing with my self right now.
@@lucaboita8537 Java, i changed some things in this farm and everything works, i have added some repeaters which focus on piston time, i changed tnt duper, i have putten some more blocks to not have saplings around my machine, now everything works well, it can Look messy but it is much better than this one on the video
@@lucaboita8537 it don't focus now on 1 lever which start machine, i have 2, one focus on piston time push, they push every 2 seconds and 2nd lever focus on dispenser to spam Bone meal
@@wildmars4795 great! do all tree types work for you? spruce doesnt for some reason for me. it worked the first time but the second sapling wont grow however all other types work fine
A little note: If your trees are over growing, and ruining part of the farm like the stripped logs, place a solid block 8 or 9 blocks above the dirt if you’re using oak saplings, this stops those giant trees from growing a ruining the farm.
![ไลฟ์สุ่ม iPhone 295 บาท... โกงมั้ย?[ โกงมั้ยครับ ep.97 ] | DOM](http://i.ytimg.com/vi/gdstHEE4UUE/mqdefault.jpg)
At first I also had the problem that spruce saplings wouldnt grow, but then I tried this:
I placed a few Oak saplings to get the farm going. Without stopping the farm all I did was switching to spruce saplings in my hotbar and voilà, the farm started to work with spruce saplings.
So u gotta start with oak or birch saplings and switch to spruce saplings in hotbar.
Hope this is helpful for some people, because i got stressed out a lot about not getting spruce wood out of this farm.
edit: Don't forget to put the Building block above the block where u grow the sapling. Otherwise the farm might break.
Thanks a lot for all the Tutorials Shulkercraft! I am using a lot of your designs in my world and it always comes out as promised. Cheers
i started with spruce. im stupid
Thank you so much
It’s still not working even when I tried that :(:(
Thank you so much for your comment. Mine only worked with oak for some reason but trying your method by simply switching the sapling type after starting with oak without turning the farm off in between absolutely works!!!
thanks
i had same problem
Be careful not to accidently right click the redstone when putting down the sapling. It will stop the pistons from pushing!
ok :)
Yep that s me. Any ideea how can i make them work again or i need to rebuild that portion?
Simple, Just pick up the redstone and put it down again.
dude, thank you so much. I was fighting with the build for hours cause I thought I didn't place a redstone dust or something. It just wasn't working.
Java or bedrock
i love how he made infinite water pool next to a freaking lake lol
😅
shulker is a giga chad XD
ikr that cracked me up.
future idea for his videos: make an infinite water source if non are available.
If you look at 1:07, the natural lake is actually closer to the farm than the infinite source that Shulker made
@@scepter0143 Lmao ur right lol
This is an excellent farm. If you're making it, it helps to think of it as seperate parts joined together. The TNT dispenser at the top is just on or off, and you can make it seperately on its own for any sort of farm like this. The top of that stack of alternating blocks and redstone torches is just either 'on' or 'off', so you can build the TNT dispenser on its own, with just a switch, to make sure you have it right. The bonemeal dispenser is another seperate part, and the pistons are a third part, with the water collection being redstone-free. I may move the switch for the bonemeal around so it's not dispensing until I get into postion.
It's nice to build this near a bonemeal farm or a mob farm. You can also easily decorate this. If you have a drowned farm in your world, using copper block as the building blocks makes it look super fancy and industrial.
Does this work on bedrock
@@Goodie2356 TNT duplication doesn't work on bedrock, so none of these designs work on bedrock.
Do you know a tree farm that will work on bedrock
@@6022 does it work in 1.21?? im on java btw
@@baconator.010 yes, just built it myself for birch logs
If you're using this on a multiplayer server that uses anything like Bukkit, Paper etc., make sure to change allow-headless-pistons to True in the server config! The farm will not duplicate the TNT without this.
thnx for the info because my farm wont work
Where it is?
At which line
@@elistaes734 do you use paper or spigot
Where is allow headless piston ?
Does lan count as multiplayer
@@Kari-Litli shouldn’t do, no - it’s normally just for paper or any Bukkit-based server type
I love how his inventory and shulker box is swap at the items needed
Best video ever, works 100%, NOTE: (if ur farm stop pushing the trees, just check if u clicked the redstone dust on your left)
i don't press it but still the farm stops pushing trees
Thank you so much, this helped a lot. ❤
Tysm
Thx it helped me
im using 1.21.1 version and it was working fine in older version. when i flick the lever the tnt dont drop and the piston arent pushing trees and also the dispenser is full of bonemeal but not dispensing
I tested and its working on JAVA 1.21. Careful to dont do anything wrong. Good Luck
Thanksssss
but for me it is not working? i dowloaded the map in the description
How can it spawn tnt? I have just that one from tutorial and many more in that upper chest but they don't go out
Does this farm work in java?
@@quatro5383 It is simple, you just follow the video, and when you will enable the lever, tnt will duplicate (it is a bug)
When you lose 1 Redstone and 1 RS Torch (due to water leakage in the farm): You can see the position in the video at 7:15.
It can happen when a block is placed at the Observer Clock.
If necessary, the farm must be reset: To do this, attach a switch at the back of the farm (opposite the water) on the piston next to the amplifier (3 Blocks backs from the single chest) and press it.
An Another switch must be on the dirt (where the seedling is placed). Press this switch as well (it will then be removed, so collect it).
This can happen when a tree grows WITHOUT the farm is on.
@carstenschlegel6975 can you be more specific and with me water leaks every 30 seconds. Could you explain why please?
You saved me, thank you
fr my TNT dup isnt working. is it possible its caused by server?
yes you on allow piston duplication and allow handless piston true
Oh my god thank you! I had wondered why mine wasnt working and you just saved me loads of time. I cannot thank you enough.
Really efficient, I've only used like 20-30 Saplings of oak for 3-5 minutes and it generated me 10-15 stacks really nice!
Do you have to get your own saplings, or does the farm generate them
@@blakestekelenburg3673 The farm generates them, and it gives a lot of saplings aswell
@@lidiouz1439 thanks for replying, I’ll definitely make the farm now 👍
@@blakestekelenburg3673you just need prob 20 to start with just to be safe but you’ll end up with multiple stacks for sure once done lol
@@blakestekelenburg3673 did you make it and did it work?
I was also needing a tree farm and found this and was just about to use your older design. Crazy how you guys read everyone's mind.
Same
crazy? i was crazy once
for every one who does not work (piston not push or water fall and distroy the redstone) make sure in this min 12:40 this is a slab and not a block, bc of this slab my farm didnt work, but now its works after i change it from block to slab. btw im using 1.20.4 and still works
I was messing with it since yesterday and couldn't figure it out. found this comment and thought i'll check if i placed a block instead of slab, that was it. Thanks dude
@@vicious3638 np bro im happy that it helped someone, thanks for your repling
IF YOUR PISTON DIDNT PUSH TREE MAKE SURE YOU CHECK 7:19 I HAVE IT GOOD but i mess it because i place oak sapling without block on top MAKE SURE YOU WATCH VIDEO TO END ITS IMPORTNT
@@dominik6318 Eu também, como resolveu?
@@seila7457 eng pls
A tip for those who can not grow spruce: make sure you have connected the red stones right and have removed all the temporary blocks, especially the dirts put by Enderman in survival mode :)
Thanks
THANKS
*Dirt
Still dosen’t working
i built everything ok and remove everything still not working il try something more maybe works
If this helps anyone having the problem with spruce trees not being pushed, I missed placing a piece of redstone on the slab that he drops onto at 13:40. I missed that he placed a piece of redstone down after removing the temporary block. Hope this helps someone.
Thanks dude!
tysm
Thanks dude
Thanks mate
im having a problem with the other side and i have been messing around with it for 20 minutes and i cant figure it out
Your tutorials are great. I'd really appreciate of you were to explain the basic idea behind the redstone. Having an idea of exactly what the redstone is accomplishing would be very interesting
Well for that you have ilmango he explains everything. Wouldn't be very wise to make a tutorial and explain why it works when most people just want to build the thing
For the people wondering, this still works in 1.21 (1.21.1 servers too)
my TNT isnt pushing and i did everything correctly, do u have a possible idea of why this is happening?
change paper settings @fearlessv1per736
Does it work on bedrock as well?
For me the repeater out of the sand isnt activating
@@oliblox5359 what changes should i do?
For me spruce isnt growing
For anyone curious, This works in 1.16.5, tnt duper works at intended, also all the saplings work aswell. Highly recommend this tree farm, I've built a lot over the years and this one by far is the most productive yet cost efficient tree farm out there right now.
Does it work in bedrock?
@@lars-mp1er no farm work in bedrock.
Does this farm works in bedrock Edition 1.19
@@Kussuplays i dont think so
@@Kussuplays no
If pistons arent working you may have hit the redstone next to sapling spot, make sure its an X not dot. And at 13:40 that you placed a redstone after destroying temp block
THANK YOU SOOOOOO MUCH
Thank you so much!! no wonder why it wasn't working
thanks, good call bro
I was losing my mind looking for this issue! Thank you. Such a simple misclick can cause the whole thing to break
But how to fix it man it still isnt working when i did both the things, i clicked on redstone again to make it x but still not working
Another tip for those who cant get the pistons to push the logs, make sure youre putting the slabs at 13:38 in the right direction. They should be facing right & left, not front and back.
doesnt work even tho i driple checked it
@@vain0307 mine works
I dont understand right and left
Mine don’t push or drop tnt
mine doesnt push the tree
if yall are curious, this farm took me around 50 mins to build, even when i rarely paused the vid, and i didnt make any mistakes when running the farm for the first time, however after a few uses, the sticky pistons on the side pushing the stripped logs was pushed out of place, due to the fact that oak trees can grow in weird shapes, and not just straight up. itwas rlly easy to fix tho, just use pistons to push it back, and replace the redstone. (However even if this happens, the farm will still work, so i rarely fix it either way.) overall, really good and quite easy.
mine started to not push at all the spruce wood for some reason , i thougjt its the leaves so i manually removed all the spruce wood and the leaves but still it grows the trees but dont push thrm , any idea what could be the problem thanks
Could you help me aswell? I have the same issue as @twisttxo (who commented here)
nahh idk how to fix sorry 😢
@@bananas6191 Dw bro, I fixed it, and now it works amazing!
how did you fix it?@@mevolent9565
Bonkers complicated farm design, but works wonders. Also never knew about the infinite TNT collision until now. Thanks for this. :)
Im having trouble with the tnt, it isnt exploding
This is nothing in terms of being complicated my man 💀
@@parzahval2884bro can u tell my how to fix tnt duper it's not working
@@parzahval2884💀💀💀 😁😁😁🤯🤯🤯🤯🤯😲😲😲😲
@@nightmareisop check if you have the water positioned correctly in the right direction
Oak trees will break this farm when one of the large varieties grows. I fixed this problem by placing a non-movable block like obsidian above the dirt block that you place the sapling on, level with top row of stripped spruce logs of the leaf crushers. This seems to have fixed the issue for me. Now this farm will reliability pump out some oak logs. Nice video and easy to follow build, well done. Cheers!
If you decide to switch to Spruce after running Oak, remove the obsidian block. The farm will run Spruce and Birch just fine. This farm will also run Jungle wood, but you will need to have a large supply of saplings. I moved the Obsidian block up one level above the stripped Spruce leaf crushers. The farm isn't completely lossless, some saplings, sticks, apples, etc. will land around the exterior of the farm. Oak, Spruce, and Birch produce a lot of saplings so the loss can be made up, but I eventually did run out of Jungle saplings.
All in all, this farm works and will produce a lot of logs.
Thank you so much man! Mine broke aswell
if u watched till the end of the video it stated to place a block to make sure big oak trees dont grow
what did you do to fix the farm after it broke from the oak? I cant for the life of me fix it
Great farm, great block-by-block tutorial. I would appreciate deeper explanation of some of the redstone
For someone who has a problem with spruce saplings check the moment 7:14 with redstone on dirt bc i haven't him and that was a problem. And if this will be your problem you should repair pistons 11:27 and stripped logs 11:47
bro, you saved my time, thx so much
Your videos are the most simple to follow out of here, there isn't anything that is hard to comprehend or see. That's great work ! thanks
do u have trouble with the tnt duper?
@@yurytheurinator2366 No, you have one ?
@@shxdo3712 ya it was b/c the srever didnt allow piston duping
There is a slight problem with this farm where, at least with spruce trees, the leaves are crushed and the saplings are popped out of the farm completely. You could probably solve this with some hoppers arranged in a ~6 block radius of the farm, but that's A LOT of hoppers to have just to catch the saplings
Hi, Can you show me mabye how to Build this collecting system:)
or just build a wall lol
you still get enough saplings to keep placing them, so whats the problem???? just let the rest despawn
Nah
Shulkercraft should make videos explaining the mechanics of this farms, their tutorials are incredible.
its roi must be low
😅😅😅😮😅
@@hunterrex8507 ROI on what? Saplings? i filled my inventory with saplings after about 1.5 hours of using the farm
guys its btw working on 1.21 so if something doesnt works its not the version (my english is not the best) (love the video btw)
Works on 1.20.4 guys! If it didn't work for you then you probably did it wrong. And don't skip the Stripped wood part. And also look out for the final part of the video if you are going to use oak sapling...
Why isn't my TNT duper working?
@@ertyge1 probably did something wrong. The first time I did it, I also did something wrong that's why it didn't work. For me it was that I didn't set a repeater to the correct tick amount.
For you, this might be different...
;;
What’s the reason behind the stripped wood?
For anyone Wondering the farm works perfectly in 1.20 but if u are playing on a paper/bukkit/purpur etc. It won't work if u don't change a setting in ur server's config
what configs do you need to change?
What config?
allow headless piston@@elishaAnjos
allow headless piston
@@S3ntra
Does cherry wood work?
thanks bro
the best and simple wood farm ever i have seen....
i built it in my survival world and its working great!!!
thanks again bro ur the best
Simple😂😅
@@Visse14 it is
works perfectly. thank you for all the amazing tutorials shulkercraft!
Does it work on bedrock
what is the chest under him for when he is afk?
@@soft._.m315 picking up more saplings
Information from original owner of the farm you have to remove the building block above the dirt where u put the sapling in order to get spruce from the farm
This doesnt work in bedrock
If Pistons doesnt push logs just try breaking the stipped logs and re placing it on the normal piston( in front of first sticky piston )at a block gap between sticky pistons and stripped logs hope this helps : )
it stile does'nt work for me i cant grow spruce
it doesn't work in bedrock? this farm only work in java?
@@Kayzo_07 try to click on the lever under the door, the redstone must be like activated i somehow missed that info and fix it in this way.
@@engistar8099 it was already activated i dont know what to do
@@Kayzo_07 did this work for you for other logs?
bc if this work so for spruce you just need to destroy the block above the dirt where you put the sapling
you know i just completed my wood farm that can only give oak wood from your channel and now you come up with this
Hahaha, I did the same one a couple of days ago! Just about to tear it down now
hilariously the longest shulker craft farm ive ever built. I had to make an entire slime farm just to get the sticky pistons
well slime farm should be at priority before wood
Fr mee too
To all the people that says it does not work it does. theres 1 little redstone that you have to remove, otherwise it wont work. This is awsome good job! (Also Regular Jungle Trees Work!!)
Where
right next to where you place the sapling
Great video no issues!! great explanation and detailed showcase of how to do everything, especially the wide shots and numbered bits thanks so much!!
This wood farm is simply awesome! I built a different one on my and my friend's minecraft server and it worked pretty decently, but unfortunatley it did not work with oak wood and whenever i made it destroy oak trees the trees destroyed it and moved a bunch of blocks around... But this farm, on the contrary, doesn't and works well with oak wood! Love this tutorial, well explained, easy to follow! Thanks, Shulkercraft
Ig you have to place a block above
did THIS wood farm work on your and your friend minecraft server?
@@itapisha this one did indeed work!
that's kinda gay
wait why did you get this problem.would need some help🤣
if your farm is only pushing 3 blocks or spruce not working, then make sure you have that 7:17 redstone dust next to the redstone torch.... the glass near it broke and water spilled and breoke the 2 redstone... but i forgot about the dust. it took me 72 hours to just find that...
I’m still experiencing the farm not working. Has yours been working?
yo please update if it still works
@@Mantaaa. Yeah it is now properly
@@unknownxd3267 works like a charm in 1.20.1
@@Mantaaa. Just check if the redstones are placed correctly and also if any temporary blocks are not removed yet...
Nice farm. I built it with Quartz Bricks as solid blocks and they got blown away by the TNT. You need to use blocks with a higher explosion resistance like the smooth stone he used. At least for the blocks next to the TNT explosion.
I’ve used smooth stones at that part, still some of them gets blown away by the tnt. Also a bit of the dirt blown away on the bottom of the farm, like 4 blocks
How is your timing so perfect? yeasterday i was thinking about tree farm and now i have a nice, easy and new desing. Thank you Shulkercraft
When shulkercraft posted it have completed more than half of the farm of their previous video
th-cam.com/video/1KHyuGajG_M/w-d-xo.html
Same here
@@kungfupandya5065 me here spending 2 weeks getting the oldest tree farm then found out it doesnt work 😅
same here, im so fed up of chopping down 2x2 spruce tress
0:43 Make infinite water near the lake
Tip: build some walls around the pistons on the sides to stop saplings from falling out and stopping the farm
How does the falling saplings stop the farm?
Mine has everything in place but stopped abruptly :/
@@deyjonnay2030 You could run out of saplings while using it
please tell me wear I know your comment is quite old please tell me though 🙏
build this in 1.21 works amazing!! with spruce not with oak it breaks it so i only use spruce but this is a amazing farm much love ♥
how do you get spruce to work? it dosnt work for me, the bone meal just keeps feeding it and it never grows?
bro please how does spurce work for you i need this to work
Anyone having problems with the logs not being pushed: くまのこ wrote a comment somewhere here in Japanese and I translated it with google, he said you need to interact with the redstone next to the sapling and so I removed an replaced it and now it works perfectly for me! Though idk why 😅
Make sure your lever is activating the red stone in front of the tree placing block
thanks so much
@@drkingkow5081 you’re welcome 😉
You're a god
@@nust8235 YEEEEEEEEEEES THAAAAAAAANK YOOOOUUUUUU you saved my life thank you really much :)
Very good farm, works very well.
Thank you for such detailed tutorial👍
Thank you, today only I was searching a tree farm design
Made this today java 1.21.1, works well but make sure if ur in server u have to enable headless piston or tnt wont dupe. Great farm.
I'm on 1.21.1 too, For some reason the rows of pistons and the wall in the back wont activate, so nothing moves it just grows one tree. I tripled checked the redstone but idk why it wont work
@@bigc327 Sorry man, the only issue i had was the tnt blew up once but i figured out on servers u need the enable setting, dont know much about anything else
Thanks for this. I would love to build it when I have the time.
At the same time, one of the more frustrating things about videos like this is that I also want to know WHY it works the way that it does (mostly pertaining to the redstone mechanics). Having to watch the process of, now do this, now do this, is great for in-the-moment building, but it doesn't help me learn the concepts. The underlying concepts are what take this sort of thing from tedious, mysterious, and frustrating to natural and adaptable.
Check out Ilmango for in-depth explanations about most redstone builds
In a nutshell, this machine's mechanics reminds of a printer. So basically, what he build is a wood printer. You have bonemeal feeding contraption at the bottom back of the machine connected with rows of sticky pistons to the left and towards the right squeezing at the sides, so the trees do not grow side thick branches and for oak he puts a block on the top, to prevent from leaf block overgrowing the whole machine (if you do not put the stone block he mentiones at the end, the tree will overgrow the squeezing chamber with leafs, which might displace some of the pistons and crash your machine). And at the very top, you have a TNT duplicator which is perfectly timed with those 4 repeaters to ensure the TNT explodes at the right time to chip away some of the wood logs, which will fall into the water and the water streams taking the logs towards the chests. in addtion as the leafs get crushed, you get SOOOO many saplings in return (so you have an endless supply of them), sticks and apples if you use Oak.
Very genious design, thank you
If spruce doesnt grow and oak and birch grow, check if the redstone is placed correctly nest to the pistons that push the tree. This also works if the pistons only push a 3 block high tree to the tnt.
ive tried everything and nothing works. it can grow everywhere except the one spot its supposed to grow on
Thanks I was completely dumb founded on what to do. After reading this I got a schematic of the tree farm and turns out I miss placed a piston. Thanks so much for your help😀
personally I had a problem with a piston. The first sticky piston of the double row of pistons was a block further on the left when it must be stuck to the first of the double row of double pistons
THANK YOU SO MUCH IT IT TOOK ME SO LONG TO FIX IT THEN IT WAS NOT PUSHING THE TREE
@@Tr7stantry right clicking the redsstone Next to the Dirst you place saplings
Also works on fabric (1.21) without any issues
Thx❤
IF YOUR TNT DUPER ISN'T WORKING:
It doesn't say it anywhere in the video, but the comparator needs to be in subtract mode. Just right click it once in order to get the clock to work properly. This worked for me at least, so I hope it helps you too!
Mine works then doesn’t continue exploding do you know what could be the reason?
Anyone having the problem with trees not being pushed, try to push the lever to open the farm door so the redstone behind it can light up and check if the redstone is placed correctly forming an x 😊
oh my god thank you so much
you are my hero
Thanks you so much I had built this farm twice due to this problem 😢 thanks😊
doesnt works
@@Cr7_theRealG0aI Check again may be the lever placed below the door broke due to water, place it again then it starts working. I also faced the same the problem
I cant explain how much i needed this, thank you guys!
Ianxofour’s tree farm is 100x better and simpler and works with stuff like mangrove
@@thesilentpearl8575 ...
@@JonnyChoi77 thank you! Good to know!
@@JonnyChoi77 theres no “more efficiency” or “less efficiency” when it comes to these stuff, it all comes down to the fact that it is nothing but you growing a tree and it getting blown up
@@JonnyChoi77 it also depends on the wood type like mangrove is sapling rich and i think spruce or smth is best for wood
Gotta put this in my hardcore world
Keep me updated
you should make iamxofours tree farm
@@lubnasharmin447 was about to say to flame "this farm is actually worse than ianxoufour's tree farm"
make ilmangos 4 type tree farm its gonna take alot of tweaking to make it not blow itself up in 1.19 but it makes 120k logs a hour instead
@@brwed ianxoufour’s design is a lot more simpler to make and does more than ilmango’s tree farm
Thank you for this amazing farm I tried this in my world It took me 2 hours to build but it is worth it gave me more than 7 stack in 3 mins brooo
You guys have read my mind, that's exactly the farm I needed. Thank you so much!
Ianxofour: AM I A JOKE TO YOU
Does it work in bedrock?
not sure about both but still ian’s one is just better
uhhhh please look at hte inventory if this guy during the items needed scene
Bro my duper not working
I just built this farm in my survival server and it works great! Thank you for the clear tutorial and the video.
I recommend building a wither skeleton farm to get all of the bones for bonemeal.
in your farm spruce sapling works ? because in my doesnt work and i dont know why
@@Pablo_Revontalizevoscheibirant yes it works
@@macaroni400 so why in my farm doesnt works
@@Pablo_Revontalizevoscheibirant i dont know lol
@@Pablo_Revontalizevoscheibirant in my farm also spruce doesn't work
for anyone having trouble with the tnt duper, replace the block next to the comparator with redstone x
Actually?
@@c00kie_c worked for me
pls elabroate
wdym?
Doesnt work
brother, you don't know what you saved me from, you fixed my grania, you explained it so well, you deserve your like and your subscription
Works like a charm, Thanks
P.S. The tutorial was really easy to follow
NO IT WAS SI HARD TO FOLLOW
incredible video, greatly explained and fully working machine
Thank you very much 🔥
You explain everything so clearly, every step of the way. 👍
working in vanilla 1.21, i think they might have changed spruce models a bit so spruce saplings feel a bit more scarce, but you can fix that by using oak logs before you start with spruce so the leaves on top of the farm prevent the saplings for falling outside of the farm
why mine dont work, the tnt duper part
for me the farm doesnt work with spruce saplings, u got any idea why?
@@simonsus2445 i think you try to use oak first then switch to spruce
I forgot to prevent the tall oak trees from being able to grow, and eventually one grew, which broke the farm, as some others have mentioned would happen. I fixed the water leakage and replaced the redstone and redstone torch, but the double pistons never pull the stripped logs back, meaning they always stay one block away from the piston instead of connected to it. Even when I break them and replace them next to the pistons, the same issue occurs as soon as I turn the farm on and place a sapling. I can't figure out how the pistons that are supposed to push and pull the stripped logs are supposed to be powered, since whenever I try to power them, only the pistons pushing the pistons get powered. My understanding is that the first pistons are supposed to push the other pistons forward, which breaks the leaves, and those pistons are supposed to push the stripped logs forward, which pushes the wood from the tree, but correct me if I'm wrong. If anyone has any ideas or tips, please let me know.
mine just broke, will fix but how do i prevent the taller oak ones from spawning?
@@cryptrain1271 you have to place a block directly above the dirt block above the level of the stripped logs that push the tree forward. I did not do this at first and my farm broke too I had to rebuild parts of the piston walls and re do the water wall. I have a block there now which should prevent the bigger oaks from spawning.
how did u fix the water leakage
@@HaVoK-e2j thanks hasnt broken again, i do however try and clean it whenever there are logs or leaves in random spots
I love your tutorials.❤️ They are easy to follow along, thanks.
It’s not their tutorial. It’s Occultgent’s and they stole his views.
@@danielkoutintchev297 cry more
that's kinda gay
I will finaly be able to get my crafting table !
If you dont want it to break when you put down oak saplings you need to put 1 block above the sapling on top of the farm 1 block higher than the stripped spruce
if u r reading this dont make this farm rather make ianxofour's versatile tree farm. It produces every single tree(except mangrove) including the nether trees and both the red and brown mushrooms. Its efficient productive and easy to build. Thanx for reading this far. Have a good day!
i just checked it. it is easier to make but shulkercrafts design gives as twice as much wood. ianxofour's farm is better for beginners but in late game i would suggest you this one
EDIT: i forgot to mention, ianxofour's farm can give you more wood types so keep that in mind :)
מי שאל
@@newikosi1739 for late game , this is not good , this farm is for beginner and middle game . There are farms with 5 types in one farm for late game
@@siddharthareddy6986 this is deffinetely more end game than ianxofours one. And that wasnt even the point
@@newikosi1739 it's not SC design
Still works in 1.21 if anyone was wondering
Thank you so much, because I play only badlands world and there is no coral to get in this type of world. So this TNT dupper is cool!
My dupper not working tell plz
@@ISI_SHERI same for me on m'y server 1.19.2 it doesnt work
tried the farm with jungle spalings (just curosity) and it worked lol. Great video
I built this farm and noticed that not all wood blocks exploded so i just built the whole tnt contraption one block higher(I built it in 1.21 if that may be the reason), anyway I hope this helps someone put there!
For me in 1.21 on a server worked perfectly! I'm just not using the oak saplings because it breaks my farm with the tall trees.
@@dromdad_what trees do you use?
@@JGT_gamer Birch saplings, and also tip for everyone: build this farm on top of your creeper/mob farm if you have one, it's a really nice combo - 2 AFK things!
bro please help my tnt duper is just pusing out the observer and not duping
I also have this same problem@@BloxGaming97
I love your builds and have used a few of them (especially the cobblestone gen). But can we get a final dimension size for the builds? I like adding buildings around them and it's nice to know how big I need to plan for.
Yea, that would be great
DOES NOT WORK FOR BEDROCK!! tnt doesn't get activated or dupe and no items get pushed into dispenser and dispenser doesn't tick and piston extenders don't work due to different budding mechanic
Brother it's for minecraft Java version not bedrock
@@Nitin_Gaming18 the vídeo don't Say it
@@Mr.BurnsII but I tried in both versions and shulkercraft make farm tutorials for minecraft Java, for farms in bedrock see prowl
@@Nitin_Gaming18 pero en el vídeo no lo dice. Eso es porque vos ya lo intentaste muchas veces.
@@Mr.BurnsII what does it mean tell in eng
crazy good farm was expecting it to not work like others but its works and has amazing rates tysm
Workingo so good in 1.21! Thanks
i tried it out in my world but it didnt work, can you help me out?
my tnt wont get pushed whyyy
Make a inf water source while you are near the river 😃
Great Farm!
TRhe only issue I seem to have is that I do not replenish saplings at a fast enough rate to keep up with the farm. I'm not too sure how to fix this as the top blocks can't be solid or else the trees don't work.
I have the same problem
@@muhammedshehzadj.a309 if you're still playing, it's likely because big oak trees spawned and the logs are obstructing where the leaves should spawn
for anyone Whose Farm just stops Working I have the solution. The dirt on which you place sapling,next to it theres a redstones make sure that you didnt tight click on it Try right clicking the redstone And it will work
Shame i didn't look here first this comment would have saved me some time haha.
You are surrounded by a river still makes an infinite water source . And can you give me the background sounds name they are so relaxing
Added the song names to the description :)
th-cam.com/video/KtmXE525xd8/w-d-xo.html
Please Watching my youtube video, subscribe channel,and please support
@@Shulkercraft why doesn’t it work for other trees?
@@bobsburgers8497other trees have different growth mechanics
@@siddharthareddy6986 oh so bonemeal doesn’t work on them?
0:13 Nice shulker box with 4 rows of storage
bro after I watched your comment I realized XD
I thought I was going paranoid thinking it was only me who noticed
still works for me in 1.21.1, java
Don't forget to make a fence around the farm! My farm was done and when I wanted to test it, 2 creepers blew it up!
same thing happened to me in hardcore lol, just finished and wanted to test it and half of it got blown apart
Same
So for some reason it didnt work for me and i kinda got to do something so if anyone sees this comment which no one probably please help me
🤔 in 1.20 do it
Vanila software take
No paper bucket
Still works as of 1.21.1
Tysm
Why is the tnt not working
really good farm, i made it in my world and works good, i am on 1.21 and still working!!!!
Can it be used in bedrock version also?
I have not tried it, but looking through the video, I would say 100% not. At 11:23 it shows sticky pistons pushing stick pistons, this only works in Java and not in Bedrock.
@@EunoiaAnrkyuk i wish i read the comments before spending an hour making it just now😁😁😁😁😐
@@ysubanime3563Been there, done that, many, many times, thankfully I've learned the most common things you can do in Java that you cannot in Bedrock so always watch such a video in full before attempting a build. Sometimes you can tweak a design to work in Bedrock, but sadly if a sticky is required to push another sticky, there is no workaround in Bedrock. I can only advise that unless it says Bedrock in the title or description always skim the comments before you start.
does this not work in 1.21? spend an hour building this and cant get it to work
😭😭😭 I spend 2 h
Yes it does, check all observers, and redstone
hey, i just built the farm but tje pistons will not move the logs into the tnt... does anyone have a solution?
same
Items are overflowing everywhere on the ground!!The trickiest part of this farm is building then slabs with the redstones.But its worth it.I strongly recommened to build this farm.For now,I can enjoy with my loads of loada of blocks.Well done shulker craft.
.
.
.
.Your huge fan!
at 0:13 you can see his inventory one line is missing 🤔🤔🤔🤔 .Can anyone explain to me 🙄🙄🙄🙄😯😯😯
Also the shulker has 1 extra
Just to make it look cleaner i guess
Mods I think
can the solid block when farming oak trees always be there? or can do i have to remove it when farming birch or spruce?
This farm is really good, but i have a problem with saplings, for some reason the farm uses more saplings then it produces, and i getting out off saplings quickly. Any ideas of fixing that?
probably one side of the stripped logs is not breaking the leaves. I couldnt tell you how to fix that because that is the problem I am dealing with my self right now.
@@Smurdy1 Did you fix it
@@tek_ark yeah, I forgot to place one redstone on one of the sides
@@Smurdy1 yeah i fixed it thanks
8 stacks and 48 oak logs in 5 minutes. I'm very happy about the way this farm turned out. Thanks for the video.
do you play on bedrock or java?
@@potatowr3521 Java
What version of minecraft did you Play is it 1.21?
@@chickendrip0 I did this in 1.20.1, but there's no reason why this shouldn't work in the latest update.
@@potatowr3521 Java
Does it produce the saplings too?(like is enough for a yes)
Yes
@@nifty4238 thx
I hate this, tnt does not work and i changed to good one but then redstone blocks somewhere and it disables my farm.
Are you java or bedrock? And if u are on java what type of server?
@@lucaboita8537 Java, i changed some things in this farm and everything works, i have added some repeaters which focus on piston time, i changed tnt duper, i have putten some more blocks to not have saplings around my machine, now everything works well, it can Look messy but it is much better than this one on the video
@@lucaboita8537 it don't focus now on 1 lever which start machine, i have 2, one focus on piston time push, they push every 2 seconds and 2nd lever focus on dispenser to spam Bone meal
@@Rysk1 idk, i built it like in thr video and it works flawlesslly
@@lucaboita8537 What version of mc do you have? I have 1.20.6 which gives new things.
Am i the only one wich the tnt dupper doesnt work anymore in 1.21
Me too
@@mateuszmysliwiec5607 Me too
works for me. are you playing on a server?
@@bal7ha2ar yeah my own, but i fixed it
@@wildmars4795 great! do all tree types work for you? spruce doesnt for some reason for me. it worked the first time but the second sapling wont grow however all other types work fine
A little note: If your trees are over growing, and ruining part of the farm like the stripped logs, place a solid block 8 or 9 blocks above the dirt if you’re using oak saplings, this stops those giant trees from growing a ruining the farm.