Job well done. Nice clean install. I've rewired several trailers. I recently replaced the standard bulb lights with LEDs on my homemade kayak trailer. I could finally relate to what you were doing LOL Thanks for sharing.
When attaching chains they should cross over not straight connect. If the trailer comes lose the tongue will hang on the chains and not drag on the ground. Otherwise, great vid. Thanks for putting it on You Tube.
Great job Kevin. If you hadn't had the 12/2 Romex, before you removed the old wires from the tongue tube, just tape the new wires to the old. Then just pull the old wires out and the new wires come with it.
When we changed our lights, we taped the new wires to the old wires and were able to pull the new through as we pulled the old out. I liked your idea of the 12/2 wire. We are having trouble with the driver's light. I'm guessing the problem is with the connection in the front since everything else works. The connector is old. Thanks for sharing.
Is it possible to change the bulbs on these BLAZER lights? I'm having a hard time trying to take the red covers off. Seem to come glued permanently and possibly braking them if I force them. Just need to change one bulb, man! No need for the full light.
I didn’t watch the video yet, I just wanted to ask to keep us in your prayers. We about to be hit by POWERFUL hurricane, 150 mph winds. We evacuated to north west Louisiana.
@@Robinson-Homestead thank you for the prayers. Our town was hit very bad. There is a lot of homes and buildings that is destroyed. I got reports that our house is in pretty good . We will probably be with out electricity for a month or more.
@@Robinson-Homestead I just put lights in mine , ran the wires just to find out the wires were too short 😂😂😂 had to go to harbor freight to the 5 foot extension
Job well done. Nice clean install. I've rewired several trailers. I recently replaced the standard bulb lights with LEDs on my homemade kayak trailer. I could finally relate to what you were doing LOL Thanks for sharing.
Gerard how are you my friend.
That was funny
People think your turning left & your really turning right
visa versa
thanks for the video
Thanks for watching!
Nice tutorial. Most complete one I've seen on TH-cam.
When attaching chains they should cross over not straight connect. If the trailer comes lose the tongue will hang on the chains and not drag on the ground. Otherwise, great vid. Thanks for putting it on You Tube.
Thanks for the comment my friend.
Good job my friend. I was telling you they were working you just didn't hear me. Haha
LOL, I would love to be there when you tell the officer that story. Well, you don’t have to worry about now, they look great. Be well my friend
Great job Kevin. If you hadn't had the 12/2 Romex, before you removed the old wires from the tongue tube, just tape the new wires to the old. Then just pull the old wires out and the new wires come with it.
Thanks for the info!
Yes they all work
Thanks for the comment and watching.
When we changed our lights, we taped the new wires to the old wires and were able to pull the new through as we pulled the old out. I liked your idea of the 12/2 wire. We are having trouble with the driver's light. I'm guessing the problem is with the connection in the front since everything else works. The connector is old. Thanks for sharing.
Thanks for watching Raker.
Great video budd
Thanks 👍
I was telling you they were working, but I guess you didn’t here me. LOL
I bought the same thing and would like to know if you install the marker light?
I didn't in mine thanks for watching.
I don't understand....where is the ground going to each light?? How is just that front one grounding the back lights
I think they're grounded to the frame through the bolt.
thanks
Thank you for the comment.
Is it possible to change the bulbs on these BLAZER lights? I'm having a hard time trying to take the red covers off. Seem to come glued permanently and possibly braking them if I force them.
Just need to change one bulb, man! No need for the full light.
Solved! There are 2 pin holes at the side bottom of each. Press then with a nail and they will come off.
Glad you got it figured out thanks for watching.
The goat needed a Light, find the one that ate the wiring, Goat should light up
Lol me can ride on the back.
Sorry he can
I didn’t watch the video yet, I just wanted to ask to keep us in your prayers. We about to be hit by POWERFUL hurricane, 150 mph winds. We evacuated to north west Louisiana.
Be safe Frank we send you our prayers
@@Robinson-Homestead thank you for the prayers. Our town was hit very bad. There is a lot of homes and buildings that is destroyed. I got reports that our house is in pretty good . We will probably be with out electricity for a month or more.
I just cut the nuts off. Much easier then trying to cut the actual bolt out
Thanks for sharing and the comment.
@@Robinson-Homestead I just put lights in mine , ran the wires just to find out the wires were too short 😂😂😂 had to go to harbor freight to the 5 foot extension
Why is your video constantly blurring? Very irritating
It was that camera I was using sorry about that thanks for the comment.