Great job on the truck! I really enjoyed watching the vid and i currently have this same body on my rebuilt Savage 21. I removed the OS 18 and replaced it with a. Dynamite .28 its a decent motor. Hats off on the dress up screw kit set i like that alot, looks great. But I have 1 question, when you say that the truck is indestructible are u referring stability wise? Because you still have lots of plastic under the shell. I ran my stock traxxas Stampede right into a high gutter during lunch break at work. lol I went from stock to after market real quick had to replace some front end parts with RPM and CNC plus i busted my steering servo lol. Thx take care.👍
What I might my saying Indestructible.. is once you put that center plate support it helps the frame from not bending.... The frame it lands the wrong way it bends without that center support! But it can still take a beating.. thank you brother for watching the videos !!
@@lawmensrc5882 Thank you so much for getting back to me, i really wanted the clarification. I luv ur clean executions on the car and trucks. I was binging a little on ur vids lol. I know you spend lots because of purchased those dress ip screws for my Helicopters. I later transitioned to crawlers, drifters and bashers. Once i invest in a truck I like to see it clean so honestly i don't use it. I think i enjoy the challenge of the build.
Man you said it the best! The challenge of the build! I LOVE building theses cars.. yeah you spend money but it’s well Worth the money! And then the satisfaction when you’re finished and you’re happy with the build makes it even better! I’m putting a few projects together just don’t have all that time but I’m working on a truggy that’s on my desk. It’s coming out really nice!!
@@lawmensrc5882 Cool i have one all CNC customer roll cage from Cali started it, stopped and went to a another project lol. I agree it's lots of $$$ I'll save the amount but you. I've seen ur builds details its all in the details even if it's covered up, you know its there. I have builds in all areas i did stop for a while. Because I'm transitioning but hopefully i will have a much better shop overall. I think i can start a small HS. Any sneak peaks on the new build?
Very nice 👍🏼 bro that baby is sweeeet! Like Zeeeeeaah sweeeet!! Bro we have to give Credit when Credit is do!! My hats 🎩 off to Hobao!! That’s an awesome Nitro MT RC! I just absolutely dislike that damn Ford body! Ford Body is almost just as bad as a E-word RC lol 😝 ! That thing is so nice it needs a Bow tie on like a CHEVY Body !! I hope people Don’t be surprised 😮 when they see me or my kids with this RC company that took over the OFNA name in the future?? Keep up the great job with these real breathing RCs ! p.s. throw a drop or two of 3in1 on your stand it will be smooth as butter and no noise!! I love your videos bro and the neat work you do ! New generation needs to see this !
BOTAJELL brother do you know that I just realized who you were.. I LOVE YOUR STUFF.. we have a lot In common when it comes to attention to details. It’s an honor to know that you watched my video.. I have a few more cars that I have on TH-cam .. you would Appreciate those built. keep up the great work you do. Love it! I’m in New Jersey maybe when you have your next RC meet.. I’ll stop by! Thanks again for watching!
Nice lookiing truck. So I am strongly considering this...how have you liked it? I know you are more on the shelf-queen side (which I think your sh*t looks AMAZING, BTW...) but from a performance/durability aspect...would you still recommend it? Thanks!
Nitro RCNerds this is a truly a beautiful truck.. it’s really nicely made .. the only thing you need to do is upgrade the chassis brace! Other then that it’s a great buy!! You’ll be happy! Stock nitro engine not so good thou but it works well! Use it until it burns out !
Mate where did you get the centre drive train from if you still know i have the same mt nitro version i have the thicker cvds on it.i I can't seem to find a thicker centre drive train i hope you can help me out thanks mate.
APRO YT I’ve been looking for the package which I never throw out.. do you have the center dog bones off the truck.. try to measure them .. I remember going with a long dog bone.. I believe I have 99mm dog bones .. I going to keep on looking .. I know I have the package in one of the Tupperware!
@@lawmensrc5882 +1 sub love the build I have one of thease myself tempted to put a hpi 5.9 in it and have the reverse set coming can't find meany thinks for this brand/Car searching mt doesn't find much but tt shows loads
Hey L RC, where do you buy parts for it? I’m thinking of getting one instead of Savage. Nitro still more fun my electric RCs, I get bored quickly with just a whining noise of electric.
Harvz B hi.. thank you for watching my video!! I love my savage but this truck is really nice.. it’s well made.. so you can go to this page.. eshop.hobao-racing.com/ for upgrades or hobao USA.com. I hope that helps!
Hi.. thanks for watching!! I hope you subscribed to the channel .. I love Kyosho products..to answer your question! If I had to choose between both trucks.. I would pick the hyper mt plus nitro .. its built different and made to bash.. you would love this truck!
NICE BRO,,STILL THINKIN BOUT GETTIN ONE AS I HAVE THE TRUGGY SS AND BUGGY SS WITH NOVA ENGINES....I JUST GOT THE KYOSHO MAD CRUSHER..THAT KE25 IS WICKED WHEN TUNED PROPERLY..IT DOES NEED SOME MORE DURABLE SCREWS AND ARM THOUGH..BEEN LOCKING FOR AFTERMARKET PARTS BUT NO LUCK YET...IF U KNOW OF ANY SUSPENSION UPGRADES FOR THE MAD CRUSHER LET ME KNOW..STILL A BAD TRUCK...I DO LOVE MY HOBAOS THOUGH GOOD CHOICE...
kawi man hi bud!! Sorry for the late response .. on a little va-ca.. check eBay.. I know for sure hot racing make upgraded parts for the mad crusher !! Hope that helps!!
Ahmad Yazirwan hi friend ! So you are going to need 4-2.5mm cone washers like 20-3mm cone washers and about 10-4mm cone washers .. I hope that helps! Thanks for watching the video !
Very nice build!
Thank you so much!
Great job on the truck! I really enjoyed watching the vid and i currently have this same body on my rebuilt Savage 21. I removed the OS 18 and replaced it with a. Dynamite .28 its a decent motor. Hats off on the dress up screw kit set i like that alot, looks great. But I have 1 question, when you say that the truck is indestructible are u referring stability wise? Because you still have lots of plastic under the shell. I ran my stock traxxas Stampede right into a high gutter during lunch break at work. lol I went from stock to after market real quick had to replace some front end parts with RPM and CNC plus i busted my steering servo lol. Thx take care.👍
What I might my saying Indestructible.. is once you put that center plate support it helps the frame from not bending.... The frame it lands the wrong way it bends without that center support! But it can still take a beating.. thank you brother for watching the videos !!
@@lawmensrc5882 Thank you so much for getting back to me, i really wanted the clarification. I luv ur clean executions on the car and trucks. I was binging a little on ur vids lol. I know you spend lots because of purchased those dress ip screws for my Helicopters. I later transitioned to crawlers, drifters and bashers. Once i invest in a truck I like to see it clean so honestly i don't use it. I think i enjoy the challenge of the build.
Man you said it the best! The challenge of the build! I LOVE building theses cars.. yeah you spend money but it’s well Worth the money! And then the satisfaction when you’re finished and you’re happy with the build makes it even better! I’m putting a few projects together just don’t have all that time but I’m working on a truggy that’s on my desk. It’s coming out really nice!!
@@lawmensrc5882 Cool i have one all CNC customer roll cage from Cali started it, stopped and went to a another project lol. I agree it's lots of $$$ I'll save the amount but you. I've seen ur builds details its all in the details even if it's covered up, you know its there. I have builds in all areas i did stop for a while. Because I'm transitioning but hopefully i will have a much better shop overall. I think i can start a small HS. Any sneak peaks on the new build?
Very nice 👍🏼 bro that baby is sweeeet! Like Zeeeeeaah sweeeet!! Bro we have to give Credit when Credit is do!! My hats 🎩 off to Hobao!! That’s an awesome Nitro MT RC! I just absolutely dislike that damn Ford body! Ford Body is almost just as bad as a E-word RC lol 😝 ! That thing is so nice it needs a Bow tie on like a CHEVY Body !! I hope people Don’t be surprised 😮 when they see me or my kids with this RC company that took over the OFNA name in the future?? Keep up the great job with these real breathing RCs ! p.s. throw a drop or two of 3in1 on your stand it will be smooth as butter and no noise!! I love your videos bro and the neat work you do ! New generation needs to see this !
BOTAJELL thank you my brother ..! Lol! I will add the 3-in-1 oil !! A Chevy body would be nice!!
BOTAJELL brother do you know that I just realized who you were.. I LOVE YOUR STUFF.. we have a lot In common when it comes to attention to details. It’s an honor to know that you watched my video.. I have a few more cars that I have on TH-cam .. you would Appreciate those built. keep up the great work you do. Love it! I’m in New Jersey maybe when you have your next RC meet.. I’ll stop by! Thanks again for watching!
Pimp tight truck I'm number 611 truck so nice I'm looking for the video of you driving it
Thank you so much my .. will upload it soon.. I have so many and no time.. lol!
❤🎉😮😊👍💋❤🍎
Nice lookiing truck. So I am strongly considering this...how have you liked it? I know you are more on the shelf-queen side (which I think your sh*t looks AMAZING, BTW...) but from a performance/durability aspect...would you still recommend it? Thanks!
Nitro RCNerds this is a truly a beautiful truck.. it’s really nicely made .. the only thing you need to do is upgrade the chassis brace! Other then that it’s a great buy!! You’ll be happy! Stock nitro engine not so good thou but it works well! Use it until it burns out !
❤🎉😅😊ไฟไฟไฟแอดพ์
Wanna c this thing run
kawi man .. how are you ? For sure .. once I break in the motor ... I will load up run videos .. for sure.. thanks for watching !
Mate where did you get the centre drive train from if you still know i have the same mt nitro version i have the thicker cvds on it.i I can't seem to find a thicker centre drive train i hope you can help me out thanks mate.
APRO YT how are you my freind ? As soon as I get home from work today .. I’ll look into getting you a part number ! Thanks again !
@@lawmensrc5882 Thats great thanks mate i appreciate that.
APRO YT I’ve been looking for the package which I never throw out.. do you have the center dog bones off the truck.. try to measure them .. I remember going with a long dog bone.. I believe I have 99mm dog bones .. I going to keep on looking .. I know I have the package in one of the Tupperware!
APRO YT .. I remember that the stock dog bones had a lot of play and I ended up getting a ofna brand .. no worries I’m on it!
What brand is that throttle servo horn?
Big Jim hi!! Thank you for watching .. so I purchased the throttle horn from eBay .. the seller is power hobby.. they have their own brand!
are we going to see some runs with that truck I want to watch it in action... some full speed runs.... how are you man....
kawi man how are you? Im finishing up some projects I have but for sure I’ll be getting ready.. still have to break in the motor!
okay thank you man... are you going to have some run videos I want to see how that mt runs
Hopefully this summer I’ll have some drum videos !!
@@lawmensrc5882 check my Mt videos I switched the engine to a basic losi 28 runs pretty good
where did you find thease upgrades ? cant find any
Andrew robinson hi!! Go to Hobao racing.com
@@lawmensrc5882 +1 sub love the build I have one of thease myself tempted to put a hpi 5.9 in it and have the reverse set coming can't find meany thinks for this brand/Car searching mt doesn't find much but tt shows loads
Andrew robinson hi!! I’m so sorry !! It’s www.hobao-usa.com/.. you can find a lot there !!
Hey L RC, where do you buy parts for it? I’m thinking of getting one instead of Savage. Nitro still more fun my electric RCs, I get bored quickly with just a whining noise of electric.
Harvz B hi.. thank you for watching my video!! I love my savage but this truck is really nice.. it’s well made.. so you can go to this page.. eshop.hobao-racing.com/ for upgrades or hobao USA.com. I hope that helps!
Does this have 2 speed or 3? I keep seeing 2 speed some pages and some days 3
Speed
Hi! It’s a 2 speed ! Thanks for watching .. don’t forget to like and subscribe I’ll be uploading new videos soon!
how much does the flange nut and size need?
m2
m3
m4
m5
m6
Hi!! Thank you ! For watching my video! So I would do 10-4mm 15-3mm and 6-2.5mm ! I would also use locking nuts! You can find them on eBay!
would you buy this over the kyosho usa 1 nitro ?
Hi.. thanks for watching!! I hope you subscribed to the channel .. I love Kyosho products..to answer your question! If I had to choose between both trucks.. I would pick the hyper mt plus nitro .. its built different and made to bash.. you would love this truck!
@lawmensrc5882 ok thanks
Anytime!!
Beautiful job dude 😍 alittle late but better late than never. You make me want one even more 👍 how do you like it?
How are you brother .. I love this truck easy to upgrade and fix.. handles great too!
@@lawmensrc5882 awesome, sounds like a nice truck 👍 I think I might need one
NICE BRO,,STILL THINKIN BOUT GETTIN ONE AS I HAVE THE TRUGGY SS AND BUGGY SS WITH NOVA ENGINES....I JUST GOT THE KYOSHO MAD CRUSHER..THAT KE25 IS WICKED WHEN TUNED PROPERLY..IT DOES NEED SOME MORE DURABLE SCREWS AND ARM THOUGH..BEEN LOCKING FOR AFTERMARKET PARTS BUT NO LUCK YET...IF U KNOW OF ANY SUSPENSION UPGRADES FOR THE MAD CRUSHER LET ME KNOW..STILL A BAD TRUCK...I DO LOVE MY HOBAOS THOUGH GOOD CHOICE...
kawi man hi bud!! Sorry for the late response .. on a little va-ca.. check eBay.. I know for sure hot racing make upgraded parts for the mad crusher !! Hope that helps!!
First
How many countersunk that needed for hypermt ?...
m2
m2,5
m3
m4
Where we can get?
Ahmad Yazirwan hi friend ! So you are going to need 4-2.5mm cone washers like 20-3mm cone washers and about 10-4mm cone washers .. I hope that helps! Thanks for watching the video !
FRANCISCO RODRIGUEZ may i know your instagram and i want to follow