Elevate your skills : Advanced pattern making course ✅ | collar neckline stitching theory

Elevate your skills : Advanced pattern making course ✅ | collar neckline stitching Theory
‪@FASHIONACADEMYMJ‬
free fashion design course at home
press the 3/8″ (1 cm) seam allowance towards the wrong side.
8. Sandwich your assembled collar between the two collar stands right sides touching and aligning the raw edges. Pin around the curved edge.
Please note that the non-interfaced/pressed collar stand piece should touch the interfaced collar fall piece and vice versa: the interfaced collar stand piece is positioned on top of the non-interfaced collar fall piece.
9. Stitch around the pinned edge all layers at once at a 3/8″ (1 cm) seam allowance. Trim the seam allowance down to 1/4″ and make a few notches around the curve to release the tension. Clip to but not through the seam line.
10. Turn the collar stand right side out and press it away from the collar.
Now it’s time to attach the collar block to the shirt.
11. Pin the right side of collar stand without interfacing from end to end to the right side of your garment. Use plenty of pins to make sure it sits well.
12. Stitch through these two layers from one end of the neckline to the other at a 3/8″ (1 cm) seam allowance then trim to 1/4″ (6 mm).
13. Working from the right side, press the collar away from your garment folding the raw seam allowance towards the collar.
14. Take the other collar stand that has the interfacing and the pressed seam allowance and fold it over to the inside of your garment enclosing all the raw edges. The folded edge should go a little pass the stitch line that we’ve just created. Pin in place.
15. Working from the right side of your garment, topstitch the collar in the crease to attach the back section.
16. Topstitch around the collar stand.
Give your collar a last good press and you are all done! Follow the rest of your pattern instructions to finish your project.
#sewing
#silai
#fashion
#basic
#beginner
#design
#diy
#stitching
#dart
#art
.......

[@MOMPRENEUR812]

Thank you mam