You can download the program on this link: www.u-blox.com/en/product/u-center I would not advertise the batteries just emphasize that in this ship can fit and size 26650.
Question is it possible to track the GSNN GPS module with a App on a mobile phone that you see the Boat moving on a (Google) Map? Thanks for the movie 😎👍🏼
Hello Robert! This is a great video. Could you please explain what is the purpose of programming the GPS modul? Does it need to be made for the function or better accuracy?
When my electronics burned out, I couldn't buy the original GPS module. That's why I showed how you can program almost every module for this ship. As for precision, with the original modules you have a maximum precision of 2.5 m, and with the new one, about 1 m.
Had mine over 18 months not had any problems at all a friend. Has same boat he uses his on extremely long 14 day plus sessions. And had no issues . Maybe it's because we sealed ours with a quality clear silicon around switches .hinges .hull . And used petroleum jelly vasaline around motors and servo switches on hoppers lights . battery compartment lid etc repels water ingress
@@RobertZovko we got ours direct from Shenzhen factory GPS models and fish finders / sonar package . We dismantled boats and started the process of making watertight added cavity foam for boyancy and obtained better quality motors & propellers from RC shop . We noticed the hinges were thin and very poor quality so replaced with quality stainless steel ones and bolts with locknuts from same RC shop . Before resealing the hull using vasaline between hull & deck then covering all way round with Dow & coring fish tank sealant water tight seal and easier to split if needed.
hi Robert- you did a great job on the video you uploaded congrats. I also worked a lot with this boat but unfortunately it gave me a problem that I couldn't solve even though I am a pro electronics - I disassembled the original position of the motherboard together with the GPS unit and put it in the center of the boat and since then the position has not worked return number 4 - do you know if there is a factory reset option? Thanks for your time
Thanks for the nice comment. As I understood, the remote works, so no reset is needed. There is a compass chip on the motherboard itself, so the motherboard must be oriented very precisely along the ship's axis, it must be as far as possible from the engine magnet, and the GPS module with the ceramic antenna must be laid horizontally, and in front of it can only be the plastic of the ship's formwork.
Odličan video, hvala. Imam jedan problem sa GPS lokacijom na ovome brodoću. Ako imate volje pomoći, pošto vidim da znate dosta 😊. Dakle, GPS se uspiješno poveže, te na daljinskom upravljaču pokazuje točnu lokaciju (udaljenost od prve spremljene lokacije), međutim kada ga pokušam vratiti na početnu poziciju (ili bilo koju spremljenu), on krene natrag za Kinu. Dakle promijenio sam GPS modul, čak sam promijenio i ploču, međutim problem je ostao. GPS modul kao Vaš uopće nije funkcionirao(sada vidim zašto). Zatim sam naručio isti kao stari i situacija ista... svaka pamoć je dobro došla.. hvala i LP
Teško mi je povjerovati da ako ste izmijeniti ploču i GPS modul da je ostao isti problem.? Prvo, da li ste brod koristili prije? Odnosno da li je radio kako treba? Koliko pozicija ima 4, 16 ili 40?
@@RobertZovko Puno hvala na odgovoru. Da, koristio sam ga prije. Sve je radilo ok. Dakle, zaista, promijenio sam i ploču i GPS modul i problem je ostao isti. 4x4 pozicije. Ugradio sam u njega Fishfinder(doslovno ugradio), pa bi sljedeće pitanje bilo jeli moguće da se poremetio centar težine, pa zbog toga fula smijer...iako je GPSom navođen i to mi to nema smisla, a i sa obzirom da brodić nosi 2 kg hrane bez problema.... Stvarno nisam pametan...
Hello, I see that you covered the GPS module with silicone to protect it from water. Wouldn't this affect the normal functioning of the module? I am in doubt whether to cover the module or not with the waterproof sealant... What would you recommend? Thanks for the video, it has been very helpful 👍
No matter how you seal, condensate will always appear. A little water that collects at the bottom will evaporate if you leave the cap on the bow open when the boat is not in use.
@@RobertZovko I think I'll throw in a couple of sachets of silica gel before a seal it to help condensation. Looking forward to watching that video of how to setup the fish finder. Thanks for your message 👍
Nice restoration. I am also using this bait boat. Currently right propellor produces bubbles and resulted in less power. Hence, Boat unable to cruise in straight line. Current setup is with Lucky fish finder FF9918-C. It was ok at 1st. Then the bubble issue started. Any idea what causes this issue? Is it just motor issue or imbalance or programming error? Thank you sir
There may be several reasons, but let's eliminate the obvious first: do you do a calibration before use? is the propeller damaged? (has a spare) The oil seal of the electric motor may have given way to water? Motherboard not well fixed? (must be orthogonal to ship) ...
@@RobertZovko Many thanks for the fast reply. Yes calibration done. Repeated testing just to be sure. I have replaced the propeller. Motherboard well placed, no displacement from start till now. 1st 20 - 30 runs was doing fine. I am unsure of the oil seal. There are some rust surrounding the both motors. Speed looks similar just by looking. May vibrate differently.
@@RobertZovko I have removed all the parts and found out the affected motor is faulty. The rotor in the canister is loose causing it to shake and loose power. Thanks for your help
Hi Robert - I program the module according to your instructions, but I can't save the settings at the end. Do you happen to know the reason why it doesn't save with the sent button? thanks
if you set it to 12:38 (video) and the settings are not saved, the reason may be: 1. the settings you are saving are not supported by the module 2. the module is not fully compatible with the program 3. ...
Hello Robert, Could you tell me please about order of pins on gps connector of Mather board.I’m interesting which number is RX pin. Thank you! Best regards, Andriyan
Hi Robert.. im not a tech guys ..not knowing much but i had just overturn the boat at ocean and seem harewire and likely i need to replace almost all the electrical parts.. was wondering if u had also tries to modified the motor to a faster one with the same motherboard . Is this do able..?? U have those video?
in order for the ship to be faster, stronger engines are needed, which requires more space, other electronics... I don't think it's profitable, better find another ship. If you replace the faulty parts, you can get some acceleration with a larger propeller.
What do you want to reset? In the video, I showed the programming of the gps module, not the motherboard. If you want to pair the motherboard with another remote or vice versa, you can find that video on TH-cam ...?
Hello robert, I have a problem with my boat, it disconnects from the remote even at a distance of a few centimeters. It no longer responds to any command and executes only the last one whose signal it received. What do you consider to be the problem and what is the solution?
Hi Robert, I have the same bait boat as you, I'm having a problem: when I give the command to go forward, the motors turn in reverse... Do you think it could be the internal board or the remote control? Thank you
Odlično obavljeo repariranje. I video je odličan. Imam nekoliko pitanja za tebe ako nije problem da mi odgovoriš 1. Dali su postavke na GPS modulu originalne ili su neka tvoja modifikacija. Ako su modifikacija šta si postigao njima. 2. Ja sam dobio isti takav brod ali UDAVLjEN. Sve sam mu zamenio. Čak i telekomandu ali sasvim drugi model. Takodje sa GPS modulom. Tu mi je nastao problem. Stari GPS radi na svojoj originalnoj elektronici. Novi isto tako. Ali kada ih zamenim nerade oba. Priključio sam stari (originalni modul) na PC i postavio sve parametre po tvome (sa videa). Isto sam probao i sa novim, sa nove elektronike, i iako je ispravan nikako ne mogu da ga priključim na PC. Oba dva modula su isti kako tvoj na videu. Neki savet
1. originalni GNSS je serija 7 i radi samo sa GPS-om točnost oko 2,5metara. U videu sam pokazao kako postaviti seriju 7 ili 8 da bi radio na tom modelu broda. Trenutno sam stavio TOPGNSS GN-805G sa GPS+GALILEO konfiguracijom i super zadovoljan, točnost oko 1m. 2. Pitanje nisam razumio, bit je koji protokol koristi matična ploča i koje podatke prima... tako i postaviti GNSS modul
@@RobertZovko mislim da je po difoltu GN-805G predvidjen za GPS+GALILEO+GLONASS. I ja sam hteo da nabavim taj modul za sebe. Ova nova telekomanda koju sam nabavio je jednoručna. Radi dobro ali joj je grška kao i kod originalne. Problem je u tome što nov, ispravan i funkcionalan modul ne mogu da priključim na PC. U-Center program mi ga uopšte ne prikazuje da je priključen na port. Ne prepoznaje ga. Kao da je prazan. U Connect prozoru mi se uopšte ne pojavljuje COP port. Oznaka mu je HTZN TTL HT2828U8G5LF. To je ono što me buni. Dali da probam sa RS232 konekcijom.
@@bobibrada3529 Tako je zadano, ali meni se pokazalo bolje GPS+GALILEO sa SBAS (EGNOS) stabilno i greška oko 1 metar. Taj modul nije sa originalnim u-blox čipom tako da ga ne očitava pravilno, ne treba ništa podešavati na njemu samo postaviti što GNSS modul šalje (message) na matičnu ploču, a to bi trebalo raditi ili instalirati Satrack client V1.29.157 pa pokušati sa njime.
Pozdrav. Imam jedno pitanje, da li je kompas funkcija apsolutno neophodna kao sto je vec deo vec postojeceg gps modula ili pak se može staviti GPS bez kompasa? Hvala puno unapred!
Kompas je na matičnoj ploči i nije dio GPS modula. Možete staviti GPS modul bez kompasa zato što ga originalni modul i nema, ali isto tako možete staviti modul sa kompasom koji neće biti u funkciji. Pozdrav
Imam još jedno pitanje ako biste bili ljubazni da mi pomognete. Kupio sam GPS modul sa u-blox neo m10 chipom. I konfigurisao sam ga isto kao sto ste i vi pokazali. Medjutim kada konektujem GPS na matičnu ploču i kada upalim brodić crvena led lampica na matičnoj ploči samo blinka u intervalima po 3, i ne mogu da uspostavim konekciju između brodića i kontrolera. Proverio sam veze najmanje desetak puta i sve mi je kako treba. Nemogu čak ni da izvršim Pairing između broda i kontrolera. Sticem utisak da je gps modul nekompatibilan sa ovom pločom. Ili sam ipak nešto i propustio? Da li znate da li ova ploca podrazav bilo koji GPS modul ili je rezervisano? Hvala puno!
Još nešto sam tek sad primetio, vaša matična ploča je plava moja je crvena, pitam se da li to može bit problem. Ne zbog boje nego funkcionalnosti. Možda je moja ploča drugačija pa zato ne mogu zameniti GPS ?
@@RobertZovko the motors are 6 to 12volts, do you think the main board could handle 12v? They make a similar model with 12v battery... I am not sure about the mainboard though.... The 12v model is a lot fastee
Just last weekend I tested the TOPGNSS GN-805G (or GN-806G with a newer antenna) in the GPS + GALILEO + SBAS (EGNOS) configuration. You can find it on AliExpress. Works great on average the error is about 1 meter. The only thing that needs to be repaired is the connector because on the module SH 1.0 mm and on the motherboard JST 1.25 mm or ZH 1.5 mm I'm not sure, the repair is simple if you use a soldering iron. The second solution is VK2828U8G5LF: www.aliexpress.com/item/32906993894.html?spm=a2g0o.order_list.0.0.17a71802fw0ZsM nothing needs to be redone for this module. There is no support for GALILEO, but you can use GLONASS. Please note that the original module only supports GPS.
Poštovani, gledao sam i drugi dio te sam vam jako zahvalan za ovaj video jer je moj brod tek u dolasku. S obzirom da nisam tako spretan ima li načina da prije upotrebe zaštitim sve ovo da mi se ne dogode blokade i korozija?
Nije neki problem, malo strpljenja i ne bi trebalo biti teško. Rastavit je jednostavno sve je na vijke, pregledati originalno ljepljenje i kod vraćanja gornjeg dijela staviti neku mast (za more) na brtvu. Mast staviti obavezno i na osovine serva od košarica za hranjenje (pokazao u videu), što se tiče motora to možete i poslije (oni su u pravilu bolje zaštićeni)...
@@RobertZovko recite mi bi li bilo pametno poprskati kabele i spojeve sa WD-40 koji se nalaze unutra, a ono izvani sa silikonskim sprejom. Ovo bi dodao na ono što ste rekli ta uraditi.
@@TheJuzni Ako sve dobro zaštitite, voda neće ulaziti, a vlagu uklonite tako da izvadite gumeni čep na pramcu broda kad ga ne koristite. Ja sa WD40 zaštitim osovine motora poslije upotrebe a unutra mislim da nije potreba iako neće smetati.
Good afternoon, i need some help please. You known how i can make the motor to be more silent (I'm using it on small carp lake and the motor is to noisy), or to adjust the motor speed? (I can't from remote). Thank you in advance.
@@danieljohnston7387 It should be fixed well, the simplest is with some glue (thermo or similar) and you should pay attention to the orientation of the motherboard itself.
@@RobertZovko the boat capsized write over when we use it second time and the motors was rusty so I replaced them but no lights are coming on at all now
Guten Tag bei meinen futterboot funktioniert die Entfernung nicht mehr .nach 20 m ist Schluss mit Steuerung .ist mal runterfallen und Antenne abgebrochen .neue Antenne aber nichts 🤷♂️
Es ist definitiv etwas mit einer Antenne, wenn alles auf kürzere Distanz funktioniert. Prüfen Sie die neue Antenne auf Kontakt im Stecker (ist die Antenne identisch?). Vielleicht ist der Stift im Stecker gebrochen, Sie müssen das Futterboot zerlegen und nachsehen.
Hallo. Bei mir funktioniert der GPS modus nicht mehr. Kalibrierung funktioniert. Entfernung zeigt immer 0 an. Speichern oder uberspeichern des Spots nicht möglich. Die Anzeige 0_|_|_|_m ist ganz verschwunden. Kann mir vielleicht jemand weiterhelfen.
Hallo, die Kalibrierung hat nichts mit dem GPS-Modul zu tun. Die Kalibrierung bezieht sich auf den Kompass, der sich auf der Hauptplatine befindet. Sie müssen das Boot zerlegen und sicherstellen, dass kein Wasser eingedrungen ist. Wenn dies der Fall ist, versuchen Sie, das GPS-Modul und die Hauptplatine zu reinigen. Wenn das nicht hilft, ersetzen Sie das GPS-Modul.
@@RobertZovko wie kann man denn das GPS kalibrieren? Ich habe das very 100 mit der ein hand gps Fernbedienung und das Boot fährt nicht gerade aus im cruse Modus
@@daniellenz2492 Auf dem Motherboard befindet sich ein Kompass, der durch ein Verfahren kalibriert wird, das Sie auf TH-cam finden (durch Drücken von zwei Tasten). Der Kompass bestimmt die Bewegungsrichtung des Schiffes. Damit das Schiff geradeaus fährt, muss die Hauptplatine orthogonal zum Rumpf des Futterbootes stehen, sie muss kalibriert sein und beide Motoren mit Propellern müssen gleich sein (Drehzahl). Das GPS-Modul kann nicht kalibriert werden, seine Genauigkeit beträgt etwa 2 Meter, was vom Modul selbst bestimmt wird, und ich habe den Programmiervorgang im Video gezeigt.
@@RobertZovko vielen Dank das Sie direkt geantwortet haben. Ich werde die Tage es mal ausprobieren 👍🏼. Gibt es denn eine Möglichkeit das Boot dann über ein Handy zu tracken so das es auf einer Karte zu sehen ist. Also quasi wie ein normaler Tracker? Auf den GSNN ist ja auch ein QR Code drauf. Wofür ist der?
Kad vam se elektronika smoči bitno je da uređaj ne uključuje dok se u potpunosti ne osuši. Ako se radi o slanoj vodi ili soku što prije, prvo se mora oprati u alkoholu ili destiliranoj vodi i u potpunosti osušiti. U protivnom elektronika strada a to vam može pregledati neki elektroničar.
Ukratko, za te novce dobije se upotrebljiv brodić. Bilo bi bolje da ima daljinski za jednu ruku, malo je nezgodno raditi sa štapom i brodom kad su obje ruke na daljinskom.
WARNING ...J'ai reçu le bateau ( V18 GPS 12000M chez aliexpress) en 1 semaine (janvier 2023). Après vérification le bateau ne va qu'a 100 mètres maxi et par petit vent . 100 mètres par sécurité tout marche très bien au dela vous le perdez si vous n'avez pas enregistré le "go home" Les points GPS sont parfaits précision au mètre prés. La touche 4 pour le retour automatique. Les 2 petites bennes parfaites (2 sur les cotés + 1 derrière ). l'autonomie d'une batterie pleine de 12000ah= 15 aller/retour (80m de distance) par petit vent sur eau close. (Temps de charge complète 8 heures sur secteur) prix d'une batterie de 12000ah supplémentaire est de 20€ (en France c'est 40€ ). Vous pouvez avoir toutes les pièces de rechange sur le site chinois à bas prix ! En résumé 160€ livré = (1 bateau + 1 batterie 12000ah + 1 télécommande avec écran +2 èlices + 1 chargeur secteur de batterie ) Prix/qualité on fait pas mieux sur le marché ! C'est un produit qui vaut le cout sans aucun doute, surtout sur étangs (gds lacs c'est risqué de le perdre malgré le "go home")
Great work can you share some details regarding the parts and the software used , which battery 🔋 did you upgrade with.
You can download the program on this link: www.u-blox.com/en/product/u-center
I would not advertise the batteries just emphasize that in this ship can fit and size 26650.
Question is it possible to track the GSNN GPS module with a App on a mobile phone that you see the Boat moving on a (Google) Map?
Thanks for the movie 😎👍🏼
Hello Robert! This is a great video. Could you please explain what is the purpose of programming the GPS modul? Does it need to be made for the function or better accuracy?
When my electronics burned out, I couldn't buy the original GPS module. That's why I showed how you can program almost every module for this ship. As for precision, with the original modules you have a maximum precision of 2.5 m, and with the new one, about 1 m.
@@RobertZovko Many thanks for your explanation
Had mine over 18 months not had any problems at all a friend. Has same boat he uses his on extremely long 14 day plus sessions. And had no issues . Maybe it's because we sealed ours with a quality clear silicon around switches .hinges .hull . And used petroleum jelly vasaline around motors and servo switches on hoppers lights . battery compartment lid etc repels water ingress
I agree, it should be done on a new boat
@@RobertZovko we got ours direct from Shenzhen factory GPS models and fish finders / sonar package . We dismantled boats and started the process of making watertight added cavity foam for boyancy and obtained better quality motors & propellers from RC shop . We noticed the hinges were thin and very poor quality so replaced with quality stainless steel ones and bolts with locknuts from same RC shop . Before resealing the hull using vasaline between hull & deck then covering all way round with Dow & coring fish tank sealant water tight seal and easier to split if needed.
@@michealadderley9081 do you have a link for the upgrade parts ?
@@michealadderley9081 hy,. i want to incrase the power of the original motor, what type of motor u use? for the new one
hi Robert- you did a great job on the video you uploaded congrats. I also worked a lot with this boat but unfortunately it gave me a problem that I couldn't solve even though I am a pro electronics - I disassembled the original position of the motherboard together with the GPS unit and put it in the center of the boat and since then the position has not worked return number 4 - do you know if there is a factory reset option? Thanks for your time
Thanks for the nice comment. As I understood, the remote works, so no reset is needed. There is a compass chip on the motherboard itself, so the motherboard must be oriented very precisely along the ship's axis, it must be as far as possible from the engine magnet, and the GPS module with the ceramic antenna must be laid horizontally, and in front of it can only be the plastic of the ship's formwork.
@@RobertZovko I didn't think of that trick at all - thank you very much - I will bring it back and let you know the news soon - good evening
Odličan video, hvala. Imam jedan problem sa GPS lokacijom na ovome brodoću. Ako imate volje pomoći, pošto vidim da znate dosta 😊. Dakle, GPS se uspiješno poveže, te na daljinskom upravljaču pokazuje točnu lokaciju (udaljenost od prve spremljene lokacije), međutim kada ga pokušam vratiti na početnu poziciju (ili bilo koju spremljenu), on krene natrag za Kinu. Dakle promijenio sam GPS modul, čak sam promijenio i ploču, međutim problem je ostao. GPS modul kao Vaš uopće nije funkcionirao(sada vidim zašto). Zatim sam naručio isti kao stari i situacija ista... svaka pamoć je dobro došla.. hvala i LP
Teško mi je povjerovati da ako ste izmijeniti ploču i GPS modul da je ostao isti problem.? Prvo, da li ste brod koristili prije? Odnosno da li je radio kako treba? Koliko pozicija ima 4, 16 ili 40?
@@RobertZovko Puno hvala na odgovoru. Da, koristio sam ga prije. Sve je radilo ok. Dakle, zaista, promijenio sam i ploču i GPS modul i problem je ostao isti. 4x4 pozicije.
Ugradio sam u njega Fishfinder(doslovno ugradio), pa bi sljedeće pitanje bilo jeli moguće da se poremetio centar težine, pa zbog toga fula smijer...iako je GPSom navođen i to mi to nema smisla, a i sa obzirom da brodić nosi 2 kg hrane bez problema.... Stvarno nisam pametan...
Bravo... beautiful work.
The vid is very useful.
Thanks
Hello,
I see that you covered the GPS module with silicone to protect it from water. Wouldn't this affect the normal functioning of the module? I am in doubt whether to cover the module or not with the waterproof sealant... What would you recommend? Thanks for the video, it has been very helpful 👍
No matter how you seal, condensate will always appear. A little water that collects at the bottom will evaporate if you leave the cap on the bow open when the boat is not in use.
@@RobertZovko I think I'll throw in a couple of sachets of silica gel before a seal it to help condensation. Looking forward to watching that video of how to setup the fish finder. Thanks for your message 👍
Yes, my friend, a small part of the water entered the exam board and the fan gate, and we checked it from the water and it works well.
Thanks for a good video, but what do you use to clean-lubricate-glue with what is it called
cleaning, degreasing: alcohol
lubrication: grease for use at sea
glued: BOSTIK SIMSON MSR Construction Adhesive EASY
Nice restoration. I am also using this bait boat. Currently right propellor produces bubbles and resulted in less power. Hence, Boat unable to cruise in straight line. Current setup is with Lucky fish finder FF9918-C. It was ok at 1st. Then the bubble issue started. Any idea what causes this issue? Is it just motor issue or imbalance or programming error? Thank you sir
There may be several reasons, but let's eliminate the obvious first:
do you do a calibration before use?
is the propeller damaged?
(has a spare)
The oil seal of the electric motor may have given way to water?
Motherboard not well fixed? (must be orthogonal to ship)
...
@@RobertZovko Many thanks for the fast reply.
Yes calibration done. Repeated testing just to be sure.
I have replaced the propeller.
Motherboard well placed, no displacement from start till now. 1st 20 - 30 runs was doing fine.
I am unsure of the oil seal. There are some rust surrounding the both motors. Speed looks similar just by looking. May vibrate differently.
@@RobertZovko I have removed all the parts and found out the affected motor is faulty. The rotor in the canister is loose causing it to shake and loose power. Thanks for your help
That's to cool for school! Great video! When storing boat should the dump hoppers be opened or closed?
it is better open for a longer period, less stress is placed on the plastic, which is prone to cracking
Hi Robert, did you remove the old glue/sealant before re-sealing and if so, how can it be removed safely?
as a rule, it is easy to remove, and what holds better I heat with a hot air gun
Brabo, sve čestitke Super je.
Hi Robert - I program the module according to your instructions, but I can't save the settings at the end. Do you happen to know the reason why it doesn't save with the sent button? thanks
if you set it to 12:38 (video) and the settings are not saved, the reason may be:
1. the settings you are saving are not supported by the module
2. the module is not fully compatible with the program
3. ...
@@RobertZovko The most likely scenario is what you say. apparently not supported by the program - thanks for your time Robert
Hello Robert,
Could you tell me please about order of pins on gps connector of Mather board.I’m interesting which number is RX pin.
Thank you!
Best regards,
Andriyan
1. NC 2. GND 3. TX (RX on modul) 4. RX (TX on modul) 5. VCC 6. NC
@@RobertZovko Thank you !!!
Hello, what kind/type of silicone/glue are you using? Thanks for answer.
BOSTIK SIMSON MSR Construction Adhesive EASY
Hi Robert.. im not a tech guys ..not knowing much but i had just overturn the boat at ocean and seem harewire and likely i need to replace almost all the electrical parts.. was wondering if u had also tries to modified the motor to a faster one with the same motherboard . Is this do able..?? U have those video?
in order for the ship to be faster, stronger engines are needed, which requires more space, other electronics...
I don't think it's profitable, better find another ship.
If you replace the faulty parts, you can get some acceleration with a larger propeller.
Hello, I want to reprogram the boat, what is the method of resetting, and do you have a video explaining this?
What do you want to reset? In the video, I showed the programming of the gps module, not the motherboard. If you want to pair the motherboard with another remote or vice versa, you can find that video on TH-cam ...?
@@RobertZovko
@@RobertZovko
Hello robert, I have a problem with my boat, it disconnects from the remote even at a distance of a few centimeters. It no longer responds to any command and executes only the last one whose signal it received. What do you consider to be the problem and what is the solution?
maybe a better solution:
th-cam.com/video/gPzbM9tVJ_g/w-d-xo.htmlsi=VWc1zbSYyjxVxDh5
Hi Robert, I have the same bait boat as you, I'm having a problem: when I give the command to go forward, the motors turn in reverse...
Do you think it could be the internal board or the remote control?
Thank you
did you swap places of the propellers
@@RobertZovko no...
Try swap
Odlično obavljeo repariranje. I video je odličan.
Imam nekoliko pitanja za tebe ako nije problem da mi odgovoriš
1. Dali su postavke na GPS modulu originalne ili su neka tvoja modifikacija. Ako su modifikacija šta si postigao njima.
2. Ja sam dobio isti takav brod ali UDAVLjEN. Sve sam mu zamenio. Čak i telekomandu ali sasvim drugi model. Takodje sa GPS modulom. Tu mi je nastao problem. Stari GPS radi na svojoj originalnoj elektronici. Novi isto tako. Ali kada ih zamenim nerade oba. Priključio sam stari (originalni modul) na PC i postavio sve parametre po tvome (sa videa). Isto sam probao i sa novim, sa nove elektronike, i iako je ispravan nikako ne mogu da ga priključim na PC. Oba dva modula su isti kako tvoj na videu.
Neki savet
1. originalni GNSS je serija 7 i radi samo sa GPS-om točnost oko 2,5metara. U videu sam pokazao kako postaviti seriju 7 ili 8 da bi radio na tom modelu broda. Trenutno sam stavio TOPGNSS GN-805G sa GPS+GALILEO konfiguracijom i super zadovoljan, točnost oko 1m.
2. Pitanje nisam razumio, bit je koji protokol koristi matična ploča i koje podatke prima... tako i postaviti GNSS modul
@@RobertZovko mislim da je po difoltu GN-805G predvidjen za GPS+GALILEO+GLONASS. I ja sam hteo da nabavim taj modul za sebe. Ova nova telekomanda koju sam nabavio je jednoručna. Radi dobro ali joj je grška kao i kod originalne. Problem je u tome što nov, ispravan i funkcionalan modul ne mogu da priključim na PC. U-Center program mi ga uopšte ne prikazuje da je priključen na port. Ne prepoznaje ga. Kao da je prazan. U Connect prozoru mi se uopšte ne pojavljuje COP port. Oznaka mu je HTZN TTL HT2828U8G5LF. To je ono što me buni. Dali da probam sa RS232 konekcijom.
@@bobibrada3529 Tako je zadano, ali meni se pokazalo bolje GPS+GALILEO sa SBAS (EGNOS) stabilno i greška oko 1 metar. Taj modul nije sa originalnim u-blox čipom tako da ga ne očitava pravilno, ne treba ništa podešavati na njemu samo postaviti što GNSS modul šalje (message) na matičnu ploču, a to bi trebalo raditi ili instalirati Satrack client V1.29.157 pa pokušati sa njime.
Hello everybody can one of you tell me how to replace the propellor?
Pozdrav. Imam jedno pitanje, da li je kompas funkcija apsolutno neophodna kao sto je vec deo vec postojeceg gps modula ili pak se može staviti GPS bez kompasa?
Hvala puno unapred!
Kompas je na matičnoj ploči i nije dio GPS modula. Možete staviti GPS modul bez kompasa zato što ga originalni modul i nema, ali isto tako možete staviti modul sa kompasom koji neće biti u funkciji.
Pozdrav
Hvala puno!
Imam još jedno pitanje ako biste bili ljubazni da mi pomognete. Kupio sam GPS modul sa u-blox neo m10 chipom. I konfigurisao sam ga isto kao sto ste i vi pokazali. Medjutim kada konektujem GPS na matičnu ploču i kada upalim brodić crvena led lampica na matičnoj ploči samo blinka u intervalima po 3, i ne mogu da uspostavim konekciju između brodića i kontrolera. Proverio sam veze najmanje desetak puta i sve mi je kako treba. Nemogu čak ni da izvršim Pairing između broda i kontrolera.
Sticem utisak da je gps modul nekompatibilan sa ovom pločom. Ili sam ipak nešto i propustio? Da li znate da li ova ploca podrazav bilo koji GPS modul ili je rezervisano?
Hvala puno!
Još nešto sam tek sad primetio, vaša matična ploča je plava moja je crvena, pitam se da li to može bit problem. Ne zbog boje nego funkcionalnosti. Možda je moja ploča drugačija pa zato ne mogu zameniti GPS ?
@@svetislavmi Nije bitna boja ploče, to su samo verzije iste ploče.
Please where did you buy all these spare parts?
a.aliexpress.com/_m0q5760
What's the accuracy of your GPS module ?
My boat very inaccurate. Some times over 2 meters.
Yes, that GPS module has accuracy of 2 meters only if it sees enough satellite.
@@RobertZovko did you try to use more accurate GPS module?
It should be less than that these days...
@@aldinoaldinovic6282 I haven't just tried the u-blox M8 GNSS chip series
@@RobertZovko ok, i will try to get NEO-6 GPS module.
thx man ;)
@@RobertZovko i think, good antenna is the best way to start tho...
Hello, do you know how to remove propeller? It seems glued
They are not glued, they are just more difficult to remove. Try using a tool, a screwdriver or needle-nose pliers.
Thank you, i am trying to install prop shaft anf intal bigger metal propellers....... Thank for your help
@@RobertZovko the motors are 6 to 12volts, do you think the main board could handle 12v? They make a similar model with 12v battery... I am not sure about the mainboard though.... The 12v model is a lot fastee
Hello, can you please share from where u purchase the gps module
Just last weekend I tested the TOPGNSS GN-805G (or GN-806G with a newer antenna) in the GPS + GALILEO + SBAS (EGNOS) configuration.
You can find it on AliExpress.
Works great on average the error is about 1 meter.
The only thing that needs to be repaired is the connector because on the module SH 1.0 mm and on the motherboard JST 1.25 mm or ZH 1.5 mm I'm not sure, the repair is simple if you use a soldering iron.
The second solution is VK2828U8G5LF: www.aliexpress.com/item/32906993894.html?spm=a2g0o.order_list.0.0.17a71802fw0ZsM
nothing needs to be redone for this module.
There is no support for GALILEO, but you can use GLONASS.
Please note that the original module only supports GPS.
@@RobertZovko thanks bro
Hi Robert, i face a problem while i was trying to configure the GPS, i will be appreciate if we can share our phone number to get your help
Poštovani, gledao sam i drugi dio te sam vam jako zahvalan za ovaj video jer je moj brod tek u dolasku. S obzirom da nisam tako spretan ima li načina da prije upotrebe zaštitim sve ovo da mi se ne dogode blokade i korozija?
Nije neki problem, malo strpljenja i ne bi trebalo biti teško. Rastavit je jednostavno sve je na vijke, pregledati originalno ljepljenje i kod vraćanja gornjeg dijela staviti neku mast (za more) na brtvu. Mast staviti obavezno i na osovine serva od košarica za hranjenje (pokazao u videu), što se tiče motora to možete i poslije (oni su u pravilu bolje zaštićeni)...
@@RobertZovko hvala vam.
@@RobertZovko recite mi bi li bilo pametno poprskati kabele i spojeve sa WD-40 koji se nalaze unutra, a ono izvani sa silikonskim sprejom. Ovo bi dodao na ono što ste rekli ta uraditi.
@@TheJuzni Ako sve dobro zaštitite, voda neće ulaziti, a vlagu uklonite tako da izvadite gumeni čep na pramcu broda kad ga ne koristite. Ja sa WD40 zaštitim osovine motora poslije upotrebe a unutra mislim da nije potreba iako neće smetati.
Good afternoon, i need some help please. You known how i can make the motor to be more silent (I'm using it on small carp lake and the motor is to noisy), or to adjust the motor speed? (I can't from remote).
Thank you in advance.
Or should I add some weight on the back to stop the noise and bobbles?
@alexandrucoseu3277 yes, a weight should be added for the propellers to work properly
What stuff is it for the mother board to be pin down with
Because me and my dad are going to fix the same boat
BOSTIK SIMSON MSR Construction Adhesive EASY
@@RobertZovko can it be like the no nail stuff as well m8
@@danieljohnston7387 It should be fixed well, the simplest is with some glue (thermo or similar) and you should pay attention to the orientation of the motherboard itself.
@@RobertZovko the boat capsized write over when we use it second time and the motors was rusty so I replaced them but no lights are coming on at all now
Guten Tag bei meinen futterboot funktioniert die Entfernung nicht mehr .nach 20 m ist Schluss mit Steuerung .ist mal runterfallen und Antenne abgebrochen .neue Antenne aber nichts 🤷♂️
Es ist definitiv etwas mit einer Antenne, wenn alles auf kürzere Distanz funktioniert. Prüfen Sie die neue Antenne auf Kontakt im Stecker (ist die Antenne identisch?). Vielleicht ist der Stift im Stecker gebrochen, Sie müssen das Futterboot zerlegen und nachsehen.
@@RobertZovko ok danke ich schaue mal nach .Der Stift im Stecker, da kommt man nur von innen ran ?
@@dunstandreas9890 der Pin ist von außen sichtbar, sollte aber am Kabel ohmsch geprüft werden
Hallo. Bei mir funktioniert der GPS modus nicht mehr. Kalibrierung funktioniert. Entfernung zeigt immer 0 an. Speichern oder uberspeichern des Spots nicht möglich. Die Anzeige 0_|_|_|_m ist ganz verschwunden. Kann mir vielleicht jemand weiterhelfen.
Hallo, die Kalibrierung hat nichts mit dem GPS-Modul zu tun. Die Kalibrierung bezieht sich auf den Kompass, der sich auf der Hauptplatine befindet.
Sie müssen das Boot zerlegen und sicherstellen, dass kein Wasser eingedrungen ist. Wenn dies der Fall ist, versuchen Sie, das GPS-Modul und die Hauptplatine zu reinigen. Wenn das nicht hilft, ersetzen Sie das GPS-Modul.
@@RobertZovko danke für die schnelle Antwort. Ich werde das mal versuchen.
@@RobertZovko wie kann man denn das GPS kalibrieren? Ich habe das very 100 mit der ein hand gps Fernbedienung und das Boot fährt nicht gerade aus im cruse Modus
@@daniellenz2492 Auf dem Motherboard befindet sich ein Kompass, der durch ein Verfahren kalibriert wird, das Sie auf TH-cam finden (durch Drücken von zwei Tasten). Der Kompass bestimmt die Bewegungsrichtung des Schiffes. Damit das Schiff geradeaus fährt, muss die Hauptplatine orthogonal zum Rumpf des Futterbootes stehen, sie muss kalibriert sein und beide Motoren mit Propellern müssen gleich sein (Drehzahl).
Das GPS-Modul kann nicht kalibriert werden, seine Genauigkeit beträgt etwa 2 Meter, was vom Modul selbst bestimmt wird, und ich habe den Programmiervorgang im Video gezeigt.
@@RobertZovko vielen Dank das Sie direkt geantwortet haben.
Ich werde die Tage es mal ausprobieren 👍🏼.
Gibt es denn eine Möglichkeit das Boot dann über ein Handy zu tracken so das es auf einer Karte zu sehen ist. Also quasi wie ein normaler Tracker? Auf den GSNN ist ja auch ein QR Code drauf. Wofür ist der?
Zdravo poštovani meni se navlazila ploča (šema) i izgubio sam funkcije dali postoji mogućnost osusiti kako osusiti hvala
Kad vam se elektronika smoči bitno je da uređaj ne uključuje dok se u potpunosti ne osuši. Ako se radi o slanoj vodi ili soku što prije, prvo se mora oprati u alkoholu ili destiliranoj vodi i u potpunosti osušiti. U protivnom elektronika strada a to vam može pregledati neki elektroničar.
@@RobertZovko hvala na savetu
Kupio sam novu matičnu ploču iste oznake isti priključci ali nemogu da se povežem sa daljinskim ako moze neka pomoć, hvala u napred
@@dejanbeli2379 Da li ste prošli proceduru uparivanja?
@@RobertZovko jesam pokušavao sam ali reaguje ko da nije u dometu non stop se oglasava daljinski kao da je brod iskljucen
pourriez vous me dire ou vous acheter les pièces détacher pour ce bateau merci
www.aliexpress.com/item/1005001640186086.html?spm=a2g0s.8937460.0.0.38fe2e0eN3f4WJ
I tried to fix my bait boat but it failed big time and I can’t fix it
What is the problem?
Pozdrav, dali valja cemu taj brodic?
Ukratko, za te novce dobije se upotrebljiv brodić. Bilo bi bolje da ima daljinski za jednu ruku, malo je nezgodno raditi sa štapom i brodom kad su obje ruke na daljinskom.
@@RobertZovko ima nesto bolje u tom cjenovnom rangu?
@@bugo1985 Ako vam treba GPS, nema u tom cjenovnom rangu, (napominjem da sada ima sličnih za upravljanje sa jednom rukom).
Αυτό το σκάφος δεν είναι κατάλληλο για θάλασσα, παρατηρώ πως μπαίνουν νερά μέσα
WARNING ...J'ai reçu le bateau ( V18 GPS 12000M chez aliexpress) en 1 semaine (janvier 2023). Après vérification le bateau ne va qu'a 100 mètres maxi et par petit vent . 100 mètres par sécurité tout marche très bien au dela vous le perdez si vous n'avez pas enregistré le "go home"
Les points GPS sont parfaits précision au mètre prés. La touche 4 pour le retour automatique. Les 2 petites bennes parfaites (2 sur les cotés + 1 derrière ). l'autonomie d'une batterie pleine de 12000ah= 15 aller/retour (80m de distance) par petit vent sur eau close. (Temps de charge complète 8 heures sur secteur) prix d'une batterie de 12000ah supplémentaire est de 20€ (en France c'est 40€ ). Vous pouvez avoir toutes les pièces de rechange sur le site chinois à bas prix ! En résumé 160€ livré = (1 bateau + 1 batterie 12000ah + 1 télécommande avec écran +2 èlices + 1 chargeur secteur de batterie ) Prix/qualité on fait pas mieux sur le marché ! C'est un produit qui vaut le cout sans aucun doute, surtout sur étangs (gds lacs c'est risqué de le perdre malgré le "go home")