hello long time no see! There is no such thing as a prototype! It is a finished product because the design has already been completed. I ran the simulation, but there is no problem with all information. I'll make a real one soon and show you! 😁😁😘
What about the steering geometry. The point where tyre meets surface in your design is much farther than of an original poin of any trike design. That would cause issues.
bro saw it right steering axis value is different The wheel moves forward about 5 cm. the rest is the same The rod end mounting is engaged in the original position. Having the front wheel moved forward was one of the things I wanted If the front wheel moves forward, the probability of rolling over can be reduced. have a lot of experience of being overturned in the future because I ride with the backrest upright. There is a new design. It was redesigned by reducing the number of necessary parts. This will actually be made and uploaded as an actual video. There is also a 4x4 design based on the above design. Thanks for your comments ^^🥰🥰😍😘😁
Haven't created it yet. I tried to make it. I bought a TIG welder so... I am designing a double wishbone trike ^^; The design is almost complete. I'll start making it soon 😇🥰😅🤣
you sir are a genius
Woohoo great video. Really enjoyed it. Bro suspension power
thank you for looking good
Bro!
Is my design a macpherson or a double wishbone?🤣🤣🤣
@@gomountaintriking8460 It's BRO suspension! lol
nice work mate , make a prototype now !!!
hello long time no see!
There is no such thing as a prototype!
It is a finished product because the design has already been completed.
I ran the simulation, but there is no problem with all information.
I'll make a real one soon and show you! 😁😁😘
What about the steering geometry. The point where tyre meets surface in your design is much farther than of an original poin of any trike design. That would cause issues.
bro saw it right
steering axis value is different
The wheel moves forward about 5 cm.
the rest is the same
The rod end mounting is engaged in the original position.
Having the front wheel moved forward was one of the things I wanted
If the front wheel moves forward, the probability of rolling over can be reduced.
have a lot of experience of being overturned in the future because I ride with the backrest upright.
There is a new design. It was redesigned by reducing the number of necessary parts. This will actually be made and uploaded as an actual video.
There is also a 4x4 design based on the above design.
Thanks for your comments ^^🥰🥰😍😘😁
th-cam.com/users/postUgkxp5FKTf9RJkUhaFU4uPeYpslwdYLMRKNR
I uploaded a captured picture of the new design, please take a look ^^ 😁😁
👏Did you built it for an ICE Trike as an upgrade?
Haven't created it yet.
I tried to make it.
I bought a TIG welder so...
I am designing a double wishbone trike ^^;
The design is almost complete.
I'll start making it soon
😇🥰😅🤣
직접 제작도 하시는건가요?
제작 이라기보다 조립에 가깝죠 ^^ 이미 만들어져 있는 부품들을 조합해서 만드는거라 😅😅