Just discovered all your vids. I'm a chef who has been repeatedly asked for photos of my food which is not my skill set but you've made it understandable & doable. Thank you so much.
Another thing I found fun to do, is to paint a dark undercoat color under the main color. I then use 180 grit to open up some spaces to the under color and wood adding a 3rd color dimension to the board.
I LOVE this and I find making styling boards addicting. I typically spray the finished board with matte clear spray just for further protection. Thank you so much! You two are THE cutest! Now I will share with my craft hubs too! (He'll be so excited for another project LOL)
Great video and fun backgrounds, I hope you don't mind me adding some pro tips, as a long time woodworker, I only offer these tips to help folks succeed, and it's not a slight about your videos. Humidity is the enemy of wood, so depending on where you live in the country, it may or may not be an issue, but it's best to do the following to insure your boards stay straight and sound- 1. When you glue boards together like this, pay attention to where the natural tree rings curve by looking at the ends of the boards. Alternate the curves, so one goes up and the next goes down. That will prevent 'cupping' which happens when all the curves are in the same direction, the wood will naturally start bowing 2. Use a primer on all sides and ALL edges. If you neglect to prime/paint edges or the back, moisture will seep in through that side and will contribute to warping Here are more general tips: 1. When gluing boards together, you can wipe off the excess glue with a damp/slightly wet paper towel after you've clamped the boards 2. Be mindful that using oil-based paint and water-based (acrylic or latex) paint together can be problematic. You can use oil-based over water-based paint, but not water-based over oil-based, it won't adhere properly. One way to introduce patches of color is to use your pop color as an undercoat, let it dry, then paint your base color on top, let it dry and then distress the base color and the pop color will show through 3. Seal all sides and edges with a clear matte sealer (comes in a spray can). That way if you spill oils or food on it, it won't stain or ruin your surface and will be much more durable.
I literally laughed out loud when Ryan went full on Vanna White with the wire brush! 😂 Now I’ve got a fun weekend project to work on. Thanks for sharing!
Ohhhh, the charred wood. Very nice. I love dark stuff like that. I use my sander but I like the wire brush idea. I didn't think of that, thanks. Yes, that glue is hellastrong. This is the same way I made my writing/drawing desk. Thanks for the idea on the wire brush and both the gray and the blue are stunning.
Such great tips! Looks like the two of you had way too much fun with this ;P Both sides are beautiful and I'm running to get my hands on that charcoal finish immediately!
So Joanie, did you notice there is no guard on Ryan's radial arm saw (among the most dangerous of power saws), no eye protection or ear protection. By the way, thanks for your channel. It has been really helpful and enjoyable! Hope Ryan stays safe!
Amazing :) I made and made a TH-cam video of my own wood background a few weeks ago made out of wood pallets and it’s honestly one of my favourites right now :) I did it more dark wood 😂
@@TheBiteShot yeah! we got some gym equipment delivered on it and there was no way I was throwing those away 😂 DIY gold delivered to my door :) I love yours though, definitely think I’ll be making some more wood backgrounds soon 😂 🤦🏼♀️ it’s all so addictive.
Wow !!! He did an amazing job, look great that backdrop. Hey he's so handy. You both guys really had a lot of fun. Thank for sharing good ideas. It's time to work on it. Big hugs ! Stay out of trouble, i will 😄😄
I really relate to that moment when you see the backdrop in photos and u just lovvveee it 😍 I have an old piece of wood who has been in the sun for years so it’s pretty aged. I painted one side with brown stain to see the beauty of wood, but now I can’t decide to paint the other side with white color or black stain like yours 🤔
I had some really old hardwood fence palings. Boy they were dilapidated and that made them even better. They sorta had little worm squigles through them. I love it so much. I want to find some more palings so I can make some more but I don't think any others will be as good as this one. I am going to make a nice grungy grey one though like yours.
I came here to say the same thing! On the end of each of the boards the grain will curve into a half circleish shape, when you are done it should look like a squiggly line going across the board. It helps to not only keep it from curving while putting it together but also as the board is exposed it will expand and contract so this helps it to keep its shape.
Thomas, I'm lost in translation, what do you mean? Put the boards together in diff direction? (that's what I think I understood) I'm going to make mine. Thanks in advance
thanks for the great tips . i am just wondering how long that glue will hold these boards. any tips on how to handle / store these boards? should they be placed on top of each other or placed along a wall? how do you store them?
I'm going to get a canvas drop cloth and paint it, cut up a stack of old hay pallets to do something like this AND this! I am starting a portrait business and I want a variety.
It also helps to leave the boards in dry place for drying. Just in case. Otherwise, if there was some moisture in them from the supplier simply because they weren't kept properly...u-u-u, you may have to face some disappointment after you've glued them together.
Joni, thank you for your inspiring videos. However, not all of us have a wonderful workshop like your husband's. So, I'm not sure to call these cheap DIY backgrounds. I'm quite good at DIY jobs but I couldn't make these myself as my town would charge a lot of money for custom-cut wood.
@@TheBiteShot I feel that! my partner does so much for my work at instagram.com/stevieshootsfood and she barely gets her hand in a shot in a blue moon. Big up the partners!!
When you go to a lumber yard or wooden board areas of Lowe's or Home Depot, most boards you will find have smooth sides. If you would like wood with "character", look for what is called "rough cut" wood. You can find rough cut wood at Lowes or Home Depot in their cedar fencing departments. When I go to my local Home Depot store, they stock 6 foot long cedar fence boards. I go through the stack to find boards that are not cracked, broken or warped. I also don't want ones that have large knot holes. After I select the ones I want, I take advantage of their "one cut free" offer and have the boards cut into four foot lengths. Why? The back seat of my car will accept four foot lengths of wood when I'm going out on location. These cedar boards can be sanded, stained, painted, assembled into surfaces by nailing together. Be creative and have fun. Terry Thomas... the photographer Atlanta, Georgia USA
I also was shocked when I saw it. It's very dangerous because there is no protection and your hand is very close to the blade. I think that saw is handmade. But otherwise I liked the video a lot, so thanks for it!
I am surprised your husband still has his fingers and arm after seeing the radial arm saw of his. No blade guard, the stand as wobbly as an old man with a cane. Spinning blades create static electricity which attract hair and clothing. A persons arm or hand can be pulled into the spinning blade before they have time to react.
Interesting, making something nice and then beating it up. I know you got kids, maybe put it in the yard and let them at it with rocks, skateboards, whatever kids can be clever at destructive methods. But then again, why let them have all the fun.
Just discovered all your vids. I'm a chef who has been repeatedly asked for photos of my food which is not my skill set but you've made it understandable & doable. Thank you so much.
I like the different video styles you added to the video. The added goofiness made the video more entertaining.
Oh my gosh! My husband is a carpenter. Now I'm going to be hounding him to make me some boards!! Thanks Joanie, these are absolutely gorgeous!!!
Oh yes!!! That makes it so easy!! Have fun!!!
I'm a big fan of using Pergo Flooring. Lots of choices and easy to use.
Another thing I found fun to do, is to paint a dark undercoat color under the main color. I then use 180 grit to open up some spaces to the under color and wood adding a 3rd color dimension to the board.
I just got back from my local Lowes where they had ready made glued up 2x3' panels like this for $23, ready for paint and distressing.
These came out gorgeous!
That video was so much fun to watch, with your dog and husband making it extra entertaining! Bring them back more often :)
You bet :) They always crack me up. And fortunately Bruce got to take the cone off this week. Poor fella!
That blue was a great choice!! Awesome shot!!
Thank you! Really had fun with it. Can't wait to shoot with it again.
Brilliant! Your family's creativity is endless! Thanks for sharing with all of us!
I LOVE this and I find making styling boards addicting. I typically spray the finished board with matte clear spray just for further protection. Thank you so much! You two are THE cutest! Now I will share with my craft hubs too! (He'll be so excited for another project LOL)
Great video and fun backgrounds, I hope you don't mind me adding some pro tips, as a long time woodworker, I only offer these tips to help folks succeed, and it's not a slight about your videos.
Humidity is the enemy of wood, so depending on where you live in the country, it may or may not be an issue, but it's best to do the following to insure your boards stay straight and sound-
1. When you glue boards together like this, pay attention to where the natural tree rings curve by looking at the ends of the boards. Alternate the curves, so one goes up and the next goes down. That will prevent 'cupping' which happens when all the curves are in the same direction, the wood will naturally start bowing
2. Use a primer on all sides and ALL edges. If you neglect to prime/paint edges or the back, moisture will seep in through that side and will contribute to warping
Here are more general tips:
1. When gluing boards together, you can wipe off the excess glue with a damp/slightly wet paper towel after you've clamped the boards
2. Be mindful that using oil-based paint and water-based (acrylic or latex) paint together can be problematic. You can use oil-based over water-based paint, but not water-based over oil-based, it won't adhere properly. One way to introduce patches of color is to use your pop color as an undercoat, let it dry, then paint your base color on top, let it dry and then distress the base color and the pop color will show through
3. Seal all sides and edges with a clear matte sealer (comes in a spray can). That way if you spill oils or food on it, it won't stain or ruin your surface and will be much more durable.
Cant believe it was just that simple. And looking awesome in the end!
I literally laughed out loud when Ryan went full on Vanna White with the wire brush! 😂 Now I’ve got a fun weekend project to work on. Thanks for sharing!
Loved it Joannie! Thanks for sharing your ideas. 😀👍🏼
Ohhhh, the charred wood. Very nice. I love dark stuff like that.
I use my sander but I like the wire brush idea. I didn't think of that, thanks.
Yes, that glue is hellastrong. This is the same way I made my writing/drawing desk.
Thanks for the idea on the wire brush and both the gray and the blue are stunning.
Me, too...been having a lot of fun with darker stuff lately. Glad ya liked it!
Absolutely gorgeous !!! Love your videos
Excellent video, like always. And all time is fun looks your husdban working and make his thing. Blessings
Joanie both sides of your board look fabulous! I love them!!!! And Ryan did such a great job! Thanks so much for the tutorial!!!!!🤗❤️😍😊🥰
I think I'll keep him :)
what is the name of the color please? thanks
Yay! Super fun! I love doable projects (that don't take a huge chunk out of any potential profit)!! Thanks!
Totally affordable!
Such great tips! Looks like the two of you had way too much fun with this ;P Both sides are beautiful and I'm running to get my hands on that charcoal finish immediately!
So Joanie, did you notice there is no guard on Ryan's radial arm saw (among the most dangerous of power saws), no eye protection or ear protection. By the way, thanks for your channel. It has been really helpful and enjoyable! Hope Ryan stays safe!
A fun project for sure!! I’m happy how mine came out!
Just found you! Soooooo good. Just a pleasure to watch. And great information.
Amazing :) I made and made a TH-cam video of my own wood background a few weeks ago made out of wood pallets and it’s honestly one of my favourites right now :) I did it more dark wood 😂
Subscribed! :)
Very cool! Wood pallets would be a great idea!
@@TheBiteShot yeah! we got some gym equipment delivered on it and there was no way I was throwing those away 😂 DIY gold delivered to my door :) I love yours though, definitely think I’ll be making some more wood backgrounds soon 😂 🤦🏼♀️ it’s all so addictive.
Wow !!! He did an amazing job, look great that backdrop. Hey he's so handy. You both guys really had a lot of fun. Thank for sharing good ideas. It's time to work on it. Big hugs ! Stay out of trouble, i will 😄😄
so much fun and inspiration. thanks for sharing.
This is soo informative..thanks for sharing .🥰
Beautiful backdrop!
I really relate to that moment when you see the backdrop in photos and u just lovvveee it 😍
I have an old piece of wood who has been in the sun for years so it’s pretty aged. I painted one side with brown stain to see the beauty of wood, but now I can’t decide to paint the other side with white color or black stain like yours 🤔
That's the best feeling!!
6:14 that transition!
I want a wood backdrop so much right now! Throwing the chains, oh my, so clever and funny! 😂😂😂
Wow. The lighting on the talking head is on point
I’m so glad I found this channel! ❤️
Yes yes.. thank you for posting this!!
Greatness, thank you I am just starting out and this will help save so much money
This is just what I needed to get ready for springtime client shoots! Thanks for the great video. Really enjoying the DIYs
So glad! Have fun!!
awesome exactly the colour i wanted ...... thanks
How many planks did you use and how wide are each?
This is exactly what i've been looking for! Thank you for this :)
Mam thank you so much for your videos I have learned a lot from it . Please make some videos on shooting a simple food video
Hello, great video DIY ... i will try soon !
Awesome tutorial! I loved your confused dog during the chain bit 😂
I had some really old hardwood fence palings. Boy they were dilapidated and that made them even better. They sorta had little worm squigles through them. I love it so much. I want to find some more palings so I can make some more but I don't think any others will be as good as this one. I am going to make a nice grungy grey one though like yours.
Alternate the end grain of each board to prevent the boards from curving. Learned from experience
That's a great tip!!! Thanks for sharing it!
I came here to say the same thing! On the end of each of the boards the grain will curve into a half circleish shape, when you are done it should look like a squiggly line going across the board. It helps to not only keep it from curving while putting it together but also as the board is exposed it will expand and contract so this helps it to keep its shape.
Thomas, I'm lost in translation, what do you mean? Put the boards together in diff direction? (that's what I think I understood) I'm going to make mine. Thanks in advance
I did not understand. Thomas, please can you explain.
oh the backdrop is so beautiful
These are nice for flat lays, but what do you use when shooting the 45 degree angle shots?
I love you two 😂😂
♥️Thank you so much this is nice 👍
Big Street Food 🍱.....
Already made some dyi boards . These will be next!
Amazing as always!!!
Glad you enjoyed it!
Super 👏👏❤❤
So awesome!! Thank you!!!
Awesome backdrop!!!
So great. I love it. What are the final dimensions of the backdrop ?
2ft by 3ft is my preferred sizing
@@TheBiteShot thank you a lot. And congratulations for your YT channel
thanks for the great tips . i am just wondering how long that glue will hold these boards. any tips on how to handle / store these boards? should they be placed on top of each other or placed along a wall? how do you store them?
Hiii, got a question, if I apply a Matte wood varnish, does it makes any shiny reflection on the photographs? Have you tried this?
I'm going to get a canvas drop cloth and paint it, cut up a stack of old hay pallets to do something like this AND this! I am starting a portrait business and I want a variety.
Ooooh, love that!!! Sounds like a great idea!
The colour is oil based or water based?
Wooden backdrops are great. But should be in different colors, to keep the vibe changing in every vid. Thanks a lot for the video.
It also helps to leave the boards in dry place for drying. Just in case. Otherwise, if there was some moisture in them from the supplier simply because they weren't kept properly...u-u-u, you may have to face some disappointment after you've glued them together.
Am really in need of this video
Joni, thank you for your inspiring videos. However, not all of us have a wonderful workshop like your husband's. So, I'm not sure to call these cheap DIY backgrounds. I'm quite good at DIY jobs but I couldn't make these myself as my town would charge a lot of money for custom-cut wood.
Oh Ryan you are the best lol
And I don't have to egg him on at all...this is him in his natural state :)
@@TheBiteShot I love that his personality shows lol the vana white style shots crack me up
Lol you said you wanted white backdrop.. But painted your board blue..😂😂
Ryan getting some shine.
He needed some airtime :)
@@TheBiteShot I feel that! my partner does so much for my work at instagram.com/stevieshootsfood and she barely gets her hand in a shot in a blue moon. Big up the partners!!
yesssssssssssssssssssssssssssss I LOVED IT TOO MUCH
When you go to a lumber yard or wooden board areas of Lowe's or Home Depot, most boards you will find have smooth sides. If you would like wood with "character", look for what is called "rough cut" wood. You can find rough cut wood at Lowes or Home Depot in their cedar fencing departments.
When I go to my local Home Depot store, they stock 6 foot long cedar fence boards. I go through the stack to find boards that are not cracked, broken or warped. I also don't want ones that have large knot holes. After I select the ones I want, I take advantage of their "one cut free" offer and have the boards cut into four foot lengths. Why? The back seat of my car will accept four foot lengths of wood when I'm going out on location.
These cedar boards can be sanded, stained, painted, assembled into surfaces by nailing together. Be creative and have fun.
Terry Thomas...
the photographer
Atlanta, Georgia USA
Now I want a wooden backdrop with every color!
ME TOO!!
Me: Look Huney I'm going to make my own backdrop. My Wife: I'll alert the emergency room. 🤣
hahahahaha!!!!! be careful David!!!!
Very nice. :)
Joanie I am unable to understand this for one photo solutions
awesome video, but what tf is that saw? not only does it look quite shaky, it is also very dangerous since there is no protection for your fingers 0.o
I'll have to ask Mr Simon about the saw...that's all him.
I also was shocked when I saw it. It's very dangerous because there is no protection and your hand is very close to the blade. I think that saw is handmade. But otherwise I liked the video a lot, so thanks for it!
What a beautiful lady, what a beautiful lash. 😍
👌🏻👌🏻👏🏻👏🏻👏🏻🧡💚
Love the video but the part where you was running that wire wheel without safety glasses. 🤦🏽♂️😂
How about the saw without protection. I was nervous as heck watching him cut the boards with that exposed blade twirling away.
If you want something...
Do It Yourself😎
Truth! I live by that to a fault :)
Please use eye protection when using power tools that can send debris around the room!
My mom and I love you so much please reply
Thanks for watching! Hugs to you both
I am surprised your husband still has his fingers and arm after seeing the radial arm saw of his. No blade guard, the stand as wobbly as an old man with a cane. Spinning blades create static electricity which attract hair and clothing. A persons arm or hand can be pulled into the spinning blade before they have time to react.
Interesting, making something nice and then beating it up.
I know you got kids, maybe put it in the yard and let them at it with rocks, skateboards, whatever kids can be clever at destructive methods.
But then again, why let them have all the fun.