Pwcgraphics will have what you need but you’re stock ones are probably faded so the new ones won’t match up. Probably have to install the whole kit. She sounds good 🤘🏼🔥
Yeah , you’re right. I was hoping to keep what I could.. original. Probably look like poo if I replace just the hood. Sounds ok for a stocker! I’m guessing because the waterbox is bone dry. Lol
It does hurt. Lol. It fantastic for going fast. Impossible to get the nose up when hitting a boat wake. It’s a great plate. You can make the VXR work…. If you use a pile of silicone. Maybe I’ll make a video. Show the size gap. ?! I’d say. Save your 50$. Also, You bought a SN???!!!
Maybe the Pro-tec one will fit?! Mines a stock VXR plate. Another thing is. One of the ribs needs to be ground down. The plate rocks back and forth. The pump hits part of the casting..
Have you checked ipd graphics? They have them. I will tell you from working at a sign shop for a living that what u see on your screen is usually off compared to what the color actually looks like. 2 you have had those graphics on there and there will be fading. Your best bet is to replace it all
@StefanMailey yeah I made graphics for my blaster then reprinted a lower side piece from the same software and same printer and it was off. Ended up just reprinting the whole kit. I know mines free and yours is not but it would be your best bet and keep that ski clean
Pwcgraphics will have what you need but you’re stock ones are probably faded so the new ones won’t match up. Probably have to install the whole kit. She sounds good 🤘🏼🔥
Yeah , you’re right. I was hoping to keep what I could.. original. Probably look like poo if I replace just the hood. Sounds ok for a stocker! I’m guessing because the waterbox is bone dry. Lol
Funny, i was about to buy a protec vxr plate for $50 bucks for my squarenose. I'll wait. That plate looks like it going to hurt .ouch...
It does hurt. Lol. It fantastic for going fast. Impossible to get the nose up when hitting a boat wake. It’s a great plate. You can make the VXR work…. If you use a pile of silicone. Maybe I’ll make a video. Show the size gap. ?! I’d say. Save your 50$. Also, You bought a SN???!!!
Maybe the Pro-tec one will fit?! Mines a stock VXR plate. Another thing is. One of the ribs needs to be ground down. The plate rocks back and forth. The pump hits part of the casting..
Have you checked ipd graphics? They have them. I will tell you from working at a sign shop for a living that what u see on your screen is usually off compared to what the color actually looks like. 2 you have had those graphics on there and there will be fading. Your best bet is to replace it all
I trust your opinion. I guess I’ll just order the entire kit. I thinks it’s a couple hundred bucks. That and turf…
@StefanMailey yeah I made graphics for my blaster then reprinted a lower side piece from the same software and same printer and it was off. Ended up just reprinting the whole kit. I know mines free and yours is not but it would be your best bet and keep that ski clean