I purchased one a few weeks ago and had the same issues that Average Marksman, SuperMike and Roger Barrera at QVO Tactical had as well as a number of others. Out of 332 rds of FMJ and JHP, I had a 10% fail to battery and it did not matter if I used the mags with the gun or my P365 AXG Legion mags. To rule the mags out, I used them in my P365 AXG Legion and had no issues with that gun. So I called Sig and mine has been there a week now. I have seen a few that got theirs back and theirs now run fine, hope mine does as well as I really like the firearm. I am glad to see that you have not had any issues with the one you purchased. I really do like the firearm, they are very accurate and I like the feel. When I get mine back, I will run several hundred more rounds through it and as long as Sig fixes it, I will be happy. Great video and review.
@@GSquaredTactical Will do, just received notice today it is shipped back from Sig and due to get on Monday, Range session will soon follow. Hope all is well now with it.
@@GSquaredTactical I received my P365 Fuse back from Sig today, Work accomplished per the form with the firearm, Inspection CW, Replaced Guide Rod and Detailed Feedway (whatever that means, I assume polished) and fired Sig 115g FMJ & JHP with no malfunctions. Not sure how many rounds they did fire but I will be taking it to the range Friday and running 200-300 rds through it of 115g, 124g and 147g FMJ/JHP ammo through it to verify. I will know then. And I must be a sucker as I got a second one and will be shooting it as well. Hopefully it goes better with the 2nd one on initial shots than the first one.
Picked mine up Saturday. Brought it home, stripped it, cleaned it, lubed it and reassembled it. Off to the range today. After 200 rds of Blazer 124 gr and 34 rds of Fed HST 124 gr +P. Not a single FTF And accurate as I could ask for. Not a huge sample size but hey not too bad. Is it just Glock Fanboys that seem to have all these problems with Sigs. Oh and I racked the slide 100 150 times by hand before the range
Heck, I literally left the gun store drove straight to the range no cleaning no oil and no particular expensive ammo And everything was fine. Thanks for watching and for commenting and please be sure to subscribe if you have not already.
Mine was 3 FTF in the first 100 rounds. After that, (next 900+), has been flawless. Certainly, difficult to load those mags the first couple of times. I took them home loaded them full and let them set over night. Still stiff, but loaded easier after that. Great video.
Another great video! Picked mine up today. Funny thing is I Hate Sig. I've owned them in the past and I swore to myself never again but I think this one may be different. I like the fact that it's the first P365 variant with a 4.3 inch barrel. Basically, the size of a Glock 19 but thinner. Glad to see you didn't have issues with it. Taking mine to the range tomorrow.
@hoodsta_Pizzo My range session went very well. I took a couple of other handguns with it to compare the feel and shootability. I took my CZ P-10F and my Beretta PX4 Storm G-SD. The Fuse shot well. No issues. About 200 rounds through it. But I think I still like my full size duty guns like the Beretta and the CZ a lot better. Recoil impulse is less with the bigger guns and I'm more accurate as well. The only advantage I see for this Fuse is for concealed carry.
@@rotadymathanks for the update I saw one yesterday and a lifelong Glock 19 / 1911 shooter and it addresses the glocks wide profile and I love the grip size. Saving up maybe time to move the Glock 19 to the safe shortly
My XL, brand new had really tight mags that were a PITA to load. I used the mag loader tool for the first few mags, until they softened up a bit. Loading them by hand was hurting the hell out of my thumb. I didn't have any issues with the gun though.
This gun feels like a 1911 in the hand but the 365 legion feels and carry’s amazing as well. Thanks for watching and for commenting and be sure to subscribe if you have not already.
I watch those videos. Average Marksman is a good video reviewer and shooter. He apparently got a defective one once. When he got it back from Sig, he didn't have any more problems with it. A gun at that price should have better quality control.
I always say that when Cz p10c had a issue everyone was staying away from it, caniks, PDP. I never hear people complain about sig. And I'm a sig fanboy but they definitely need to do better for sure
Sig reportedly had some bad extractors. Coincidentally, several other new pistol releases from other manufacturers have had extractor related issues. Makes me wonder if they're not subbing-out parts to 3rd parties. Feed ramps are also mentioned in warranty return docs. FWIW, the finish quality seems to have degraded somewhat recently in general, perhaps as a 'not needed' cost-saving measure. My Walther P99 has an almost mirror polisged feed ramp finish, and the gun eats anything 9mm. Coincidence? Perhaps... but with how common power tools are and how most browning action pistol barrels can easily be removed, a little feed ramp polishing might not hurt.
Yeah I agree for the most part. Not sure about the farming out parts but who know they do it with sights and mags or at least S&W does. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Not really it’s there but barely that’s why I went back sadly to the Romeo X compact. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Unfortunately, the one that I purchased will have to go back to Sig for repairs. From what i could shoot i really dug it. Getting failures to load every couple rounds, sometimes every round. Tapping the mag would sometimes allow it to RTB, when it didn't, a forceful smack to the back of the slide would work. Didn't seem to matter which magazine is used(even used a 17rd mag i bought for my p365x after the macro came out). Put 200 rounds through very patiently. There were a few times I actually got to fire a few rounds in a row, but in total it was around 80 FTL's. Outside of the issues, I really like the gun, so im looking forward to getting fixed.
I hate that stuff like this happens as long as this company has been making firearms. It looks as though they would have the simple things like feeding and magazines down, but sadly it seems folks like to beta test and let their customers be the ones to find out the issues, just so they are able to get a product to market faster. Thanks for watching and let me know how it goes and be sure to subscribe if you have not already
@@GSquaredTactical Got to hand it to Sig for speed. I sent it off last Friday before a work trip, came back Thursday. They polished the breech face, replaced the extractor, and fired 34 rds 115gr. Hoping to get some range time in soon to test it out, but i was impressed with the turnaround.
@GSquaredTactical put 300rds thru without a hiccup. Shot spot on, nice ragged holes. Definitely my new favorite, but I will say, it gets HOT fast. Had to put a glove on my support hand towards the end because my thumb was cooked.
@snapshotdod yeah it gets extremely hot and so much that my wife would not shoot it after I had put about 75 rounds through it, but there are those that say there’s does not get hot but when they thin these things out the way they do there’s nothing that can happen but get warm faster. Thanks for watching him for commenting and be sure to subscribe if you have not already.
These run awesome especially after a lucky 7s porting job and then adding mischief machine commander xxl grip modules turns it into a gorgeous flat shooting monster
@GSquaredTactical sure will an did subscribe. I have the tacopps. The fuse will be my winter carry. Missing half my trigger and middle fingers. So these guns are easier for me to shoot. I can shoot ok with my other hand but still prefer my right hand anyways.
@GSquaredTactical ok 300 rounds fmj 124 grain 1 failure to feed 2nd round an 2 fail to go into battery. 90 rounds 124 grain sig elite v-crown jhp. No issues. Gun was not cleaned out of box just threw a little oil on the rails.
@1kozmosis well besides that how has the gun been performing because I just done a 1000 round follow up on mine today and it has been completely flawless with just bulk ball ammunition. Thanks for watching and for commenting and be sure to subscribe if you have not
The threaded barrel for the TacOps is about 4.3". Tell me how the Fuse is any better than an X-Macro TacOps with a 4.3 inch threaded barrel? Think I'll just wait for the 365 AXG grip module to come out instead - or pick up a Shalotech aluminum grip module.
Have you tried to hold the trigger pulled during dry fire and try to rack the slide? I’ve noticed that on mine, the disconnector of the FCU gets very stiff and keeps the slide from racking smoothly. But if you let go of the trigger, the slide racks more easily (not smooth still). Can you check on yours and confirm? Maybe it’s a break in thing, I only shot 120 rounds so far….. this is my first sig. any help is appreciated. Thanks!!
Literally every 365 I’ve ever own is that way. It’s a pretty well known thing about it. Not sure why but my 365 .380, 9mm, 365 XL, 365 Tacops, 365 rose, legion and this one all do it but never has caused a problem. Before I learned that I almost dropped several in the gun store lol. Thanks for watching and commenting and please be sure to subscribe if you haven’t already.
I haven't had any issues with mine not feeding ammo, but I do have an issue with the iron sights. I even shot the pistol in a vice, but with the sights, at 15 yards, it shoots 4" high. Anyone else seeing this with the DP sights?
I have not heard of this. I can tell you that the red dot on my reflex is sitting perfectly in front of the Dot in the front site so I would think that would mean since I shoot deadly accurate with this thing that it would also be that way with the iron sites, but who knows bro. Thanks for watching and for commenting and be sure to subscribe if you have not already.
Well, over the last couple of years I have considered myself very fortunate to have purchased the new releases upon the pistol being initially released and have not had a single issue out of either one of the variants of the S&W 10 mm as well as this one. Unfortunately as a creator, I really don’t have the option of waiting a year to review it because it will have died down by then and I will not be able to maximize the viewership so I have to be the guinea pig which I’m glad to be lol thanks for commenting and please be sure to subscribe if you have not already
Brother that is extremely tough to answer, but if I must I would lean towards…no. Thanks for watching and commenting and be sure to subscribe if you haven’t already
If I can be honest, I only bought it because of all the people saying they had issues because when you trash a gun, it makes for very good views, but it’s hard for me to wish that a gun will fail because I pay for them with my own money And it was completely flawless so that’s what I reported. Thanks for watching and for commenting and please be sure to subscribe if you have not already.
I am interested because I love my p365s, but I'll wait a year or 2 to let them work out the problems. Never buy the 1st models of cars and guns. We are beta testing nowadays.
I never really understand the whole reliability discussion if a gun has issues the first hundred rounds. 2 of the 5 glocks ive had had a handful of failure to feed issues. The cz's ive owned never had issues. My shadow systems gun had issues the first 50 to 100 rounds then hasnt failed since will all types of ammo. Im not sure what im trying to say. Just throwing it out there.
I get it. I know what you were trying to say. The only two brands left in my safe that have never had a single malfunction are CZ and H&K. I own 17 CZ’s and 8 H&K’s literally every other gun brand I have in my safe I have had at least one with a failure. I personally just am extremely OCD about the function of my firearms from the first round until the 1000 round. But I completely understand what you are saying there are some guns even guns that are not typically known to need breaking in. That will occasionally need to be shot a little bit before they can be considered reliable and I do not suppose there is anything wrong with that, as long as you do the testing thanks for watching and be sure to subscribe if you have not already
I e had my fuse for less than a week now Back plate broke after less than 50 rounds Now that’s replaced I’m getting FTF and LPSs Changed ammo and it runs great But now I have 1000 rounds that the gun won’t shoot
@MotorBoating1413 I’ve started running a lot of PMC as well because I’ve had some issues recently with stuff that used to be solid like Fiocchi and even some cheaper stuff like New Republic and BB. I’ve been running a lot of ATS and Igman lately and it’s been very solid and priced well
I mean, of course the hellcat is more concealable and just overall more carryable, but as far as shootability definitely the fuse is way more accurate and more pleasurable to shoot. Thanks for watching and for commenting and be sure to subscribe if you have not already.
I am about 350 into this one and have not had any issues with mine either. Thanks for watching and for sharing your experience and be sure to subscribe if you have not already.
I want to like this gun but for edc after all I've seen. My life, my wife's life on the line. Nope. I don't feel comfortable with it. As a toy for the range. Sure. But for edc. Nope. 🤷♂️ Just my opinion
Hey man I get it you’ve got to carry what you are comfortable with no questions. Thanks for watching and for taking time to comment and be sure to subscribe if you have not already.
I've let someone shoot my p229 Tac Elite SRT And had ftf issues they would have issues about ever 3rd to 5th Round it shocked me because I've personally never had a malfunction and I would shoot it No Problem Dead on very accurate and I would give it to them and issues it Ended up being Noodle wrists after teaching them how to Hold and Shoot and Presto No more issues! 😳🙄
@@GSquaredTactical Oh it was the music I couldn't concentrate. Good looking gun and yours seem to be running way better than others, you are one of the lucky ones.
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
I purchased one a few weeks ago and had the same issues that Average Marksman, SuperMike and Roger Barrera at QVO Tactical had as well as a number of others. Out of 332 rds of FMJ and JHP, I had a 10% fail to battery and it did not matter if I used the mags with the gun or my P365 AXG Legion mags. To rule the mags out, I used them in my P365 AXG Legion and had no issues with that gun. So I called Sig and mine has been there a week now. I have seen a few that got theirs back and theirs now run fine, hope mine does as well as I really like the firearm.
I am glad to see that you have not had any issues with the one you purchased. I really do like the firearm, they are very accurate and I like the feel. When I get mine back, I will run several hundred more rounds through it and as long as Sig fixes it, I will be happy.
Great video and review.
Let us know how the process goes and if they get it resolved. Thanks for watching and be sure to subscribe if you haven’t already
@@GSquaredTactical Will do, just received notice today it is shipped back from Sig and due to get on Monday, Range session will soon follow. Hope all is well now with it.
🤞🏻
@@GSquaredTactical I received my P365 Fuse back from Sig today, Work accomplished per the form with the firearm, Inspection CW, Replaced Guide Rod and Detailed Feedway (whatever that means, I assume polished) and fired Sig 115g FMJ & JHP with no malfunctions. Not sure how many rounds they did fire but I will be taking it to the range Friday and running 200-300 rds through it of 115g, 124g and 147g FMJ/JHP ammo through it to verify. I will know then. And I must be a sucker as I got a second one and will be shooting it as well. Hopefully it goes better with the 2nd one on initial shots than the first one.
@Bryan-1689 let me know how it goes. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Picked mine up Saturday. Brought it home, stripped it, cleaned it, lubed it and reassembled it. Off to the range today. After 200 rds of Blazer 124 gr and 34 rds of Fed HST 124 gr +P. Not a single FTF And accurate as I could ask for. Not a huge sample size but hey not too bad. Is it just Glock Fanboys that seem to have all these problems with Sigs. Oh and I racked the slide 100 150 times by hand before the range
Heck, I literally left the gun store drove straight to the range no cleaning no oil and no particular expensive ammo And everything was fine. Thanks for watching and for commenting and please be sure to subscribe if you have not already.
Mine was 3 FTF in the first 100 rounds. After that, (next 900+), has been flawless. Certainly, difficult to load those mags the first couple of times. I took them home loaded them full and let them set over night. Still stiff, but loaded easier after that. Great video.
Thanks, man and thanks for watching. Period. Please be sure to subscribe if you have not already.
Another great video! Picked mine up today. Funny thing is I Hate Sig. I've owned them in the past and I swore to myself never again but I think this one may be different. I like the fact that it's the first P365 variant with a 4.3 inch barrel. Basically, the size of a Glock 19 but thinner. Glad to see you didn't have issues with it. Taking mine to the range tomorrow.
Let me know how it goes and what you think of it. Thanks for watching and be sure to subscribe if you haven’t already
@hoodsta_Pizzo I assume that you are asking me. If so, no I did not have one single issue and I’ve put 300 through it so far.
@hoodsta_Pizzo My range session went very well. I took a couple of other handguns with it to compare the feel and shootability. I took my CZ P-10F and my Beretta PX4 Storm G-SD. The Fuse shot well. No issues. About 200 rounds through it. But I think I still like my full size duty guns like the Beretta and the CZ a lot better. Recoil impulse is less with the bigger guns and I'm more accurate as well. The only advantage I see for this Fuse is for concealed carry.
@rotadyma can’t beat the CZ. That wasn’t fair to the fuse lol
@@rotadymathanks for the update I saw one yesterday and a lifelong Glock 19 / 1911 shooter and it addresses the glocks wide profile and I love the grip size. Saving up maybe time to move the Glock 19 to the safe shortly
My XL, brand new had really tight mags that were a PITA to load. I used the mag loader tool for the first few mags, until they softened up a bit. Loading them by hand was hurting the hell out of my thumb. I didn't have any issues with the gun though.
Yeah they was right but have loosened up significantly now. Thanks for watching and commenting and be sure to subscribe if you haven’t already
It’s my first firearm. Jammed 3-4 times in the first two range sessions but no problems in the 1500+ rounds after that
Good Lord you’ve put 2k through this things already? Thanks for watching and commenting and be sure to subscribe if you haven’t already
This could be a year end gift for myself... Good video thanks for sharing!
You say you are going to buy them all lol
@@GSquaredTactical I know haha.. But this or a P229 for sure!
Get the 229
I don’t own a 365 yet. I like the look of the fuse and the Legion. It’s hard to tell which 365 variant is the best for a small handed shooter like me.
This gun feels like a 1911 in the hand but the 365 legion feels and carry’s amazing as well. Thanks for watching and for commenting and be sure to subscribe if you have not already.
"well that's a big 10-4" haha love it bro 🔥 video picking one up soon got it on layaway
Sweet let me know how you like it and be sure to subscribe if you haven’t already
Love your vids, man! Thanks.
Thanks for saying so. I hope you are a subscriber
I watch those videos. Average Marksman is a good video reviewer and shooter. He apparently got a defective one once. When he got it back from Sig, he didn't have any more problems with it. A gun at that price should have better quality control.
Oh absolutely but there’s no way they can produce as much new stuff as they do and not be beta testing. You are their QC
Thanks for watching
I always say that when Cz p10c had a issue everyone was staying away from it, caniks, PDP. I never hear people complain about sig. And I'm a sig fanboy but they definitely need to do better for sure
Yeah man for sure
Awesome review
Thank you sir and I hope you are a subscriber. Check me out on rumble and Patreon
Sig reportedly had some bad extractors. Coincidentally, several other new pistol releases from other manufacturers have had extractor related issues. Makes me wonder if they're not subbing-out parts to 3rd parties. Feed ramps are also mentioned in warranty return docs. FWIW, the finish quality seems to have degraded somewhat recently in general, perhaps as a 'not needed' cost-saving measure. My Walther P99 has an almost mirror polisged feed ramp finish, and the gun eats anything 9mm. Coincidence? Perhaps... but with how common power tools are and how most browning action pistol barrels can easily be removed, a little feed ramp polishing might not hurt.
Yeah I agree for the most part. Not sure about the farming out parts but who know they do it with sights and mags or at least S&W does. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Get mine Monday, I hope shes a good one like this one
Me too brother let me know. Thanks for watching and for commenting and be sure to subscribe if you have not already.
I can't decide on which one to get first the fuse or Macro, definitely getting both. Hope the run fine
I prefer the Macro for carry fuse for better shooting experience
@ oh ok. I was holding both of them yesterday. But I'm starting to enjoy my Cz P10c more along with my mete sf& M&P2.0
@Precocktrigger yeah I’ve messed up selling a guy a extra CZ I had now he won’t buy anything else I’m selling said he’s a CZ guy now
@@GSquaredTactical Lol yeah it shoots nice after, they fixed the striker. I'm at a 700 rounds now
Sweet
Are you able to have a good iron sight picture with the 507k red dot on it?
Not really it’s there but barely that’s why I went back sadly to the Romeo X compact. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Seems like a nice 365 but Im happy with my Kimber R7 Maco.
Oh I do like my Mako R7 as well. Thanks for watching
Unfortunately, the one that I purchased will have to go back to Sig for repairs. From what i could shoot i really dug it. Getting failures to load every couple rounds, sometimes every round. Tapping the mag would sometimes allow it to RTB, when it didn't, a forceful smack to the back of the slide would work. Didn't seem to matter which magazine is used(even used a 17rd mag i bought for my p365x after the macro came out). Put 200 rounds through very patiently. There were a few times I actually got to fire a few rounds in a row, but in total it was around 80 FTL's. Outside of the issues, I really like the gun, so im looking forward to getting fixed.
I hate that stuff like this happens as long as this company has been making firearms. It looks as though they would have the simple things like feeding and magazines down, but sadly it seems folks like to beta test and let their customers be the ones to find out the issues, just so they are able to get a product to market faster. Thanks for watching and let me know how it goes and be sure to subscribe if you have not already
@@GSquaredTactical Got to hand it to Sig for speed. I sent it off last Friday before a work trip, came back Thursday. They polished the breech face, replaced the extractor, and fired 34 rds 115gr. Hoping to get some range time in soon to test it out, but i was impressed with the turnaround.
Well, let me know how the range time goes.
@GSquaredTactical put 300rds thru without a hiccup. Shot spot on, nice ragged holes. Definitely my new favorite, but I will say, it gets HOT fast. Had to put a glove on my support hand towards the end because my thumb was cooked.
@snapshotdod yeah it gets extremely hot and so much that my wife would not shoot it after I had put about 75 rounds through it, but there are those that say there’s does not get hot but when they thin these things out the way they do there’s nothing that can happen but get warm faster. Thanks for watching him for commenting and be sure to subscribe if you have not already.
These run awesome especially after a lucky 7s porting job and then adding mischief machine commander xxl grip modules turns it into a gorgeous flat shooting monster
Heck yeah dude. Follow me on facebook and send me some pics. Thanks for watching and for commenting and be sure to subscribe if you have not already.
@@GSquaredTactical I left some comments about it on your Facebook page
You could always put the slide on the Legion frame (grip module)
You think that would work
@@GSquaredTactical definitely
How would it look is the question. I’m crazy enough to look lol
@@GSquaredTactical I feel like it would be awesome
I picked one up yesterday and hitting the range monday.
Heck yeah bro let me know how you like it and be sure to subscribe if you haven’t already
@GSquaredTactical sure will an did subscribe. I have the tacopps. The fuse will be my winter carry. Missing half my trigger and middle fingers. So these guns are easier for me to shoot. I can shoot ok with my other hand but still prefer my right hand anyways.
Sounds like you’ve got a plan. Thanks for your support.
@GSquaredTactical ok 300 rounds fmj 124 grain 1 failure to feed 2nd round an 2 fail to go into battery.
90 rounds 124 grain sig elite v-crown jhp. No issues.
Gun was not cleaned out of box just threw a little oil on the rails.
@1kozmosis well besides that how has the gun been performing because I just done a 1000 round follow up on mine today and it has been completely flawless with just bulk ball ammunition. Thanks for watching and for commenting and be sure to subscribe if you have not
Optic on this 507k? Need an attachment plate or does it drop in?
No plate. Flush mount. Thanks for watching and be sure to subscribe if you haven’t already
The threaded barrel for the TacOps is about 4.3". Tell me how the Fuse is any better than an X-Macro TacOps with a 4.3 inch threaded barrel? Think I'll just wait for the 365 AXG grip module to come out instead - or pick up a Shalotech aluminum grip module.
Sound like a plan
Have you tried to hold the trigger pulled during dry fire and try to rack the slide? I’ve noticed that on mine, the disconnector of the FCU gets very stiff and keeps the slide from racking smoothly. But if you let go of the trigger, the slide racks more easily (not smooth still). Can you check on yours and confirm? Maybe it’s a break in thing, I only shot 120 rounds so far….. this is my first sig. any help is appreciated. Thanks!!
Literally every 365 I’ve ever own is that way. It’s a pretty well known thing about it. Not sure why but my 365 .380, 9mm, 365 XL, 365 Tacops, 365 rose, legion and this one all do it but never has caused a problem. Before I learned that I almost dropped several in the gun store lol. Thanks for watching and commenting and please be sure to subscribe if you haven’t already.
Yes mine was super tight doing the same but is easier now. About 450 rounds in, has been perfect so far no malfunctions
Yeah it’s fine they all do it. Thanks for watching and be sure to subscribe if you haven’t already
I haven't had any issues with mine not feeding ammo, but I do have an issue with the iron sights. I even shot the pistol in a vice, but with the sights, at 15 yards, it shoots 4" high. Anyone else seeing this with the DP sights?
I have not heard of this. I can tell you that the red dot on my reflex is sitting perfectly in front of the Dot in the front site so I would think that would mean since I shoot deadly accurate with this thing that it would also be that way with the iron sites, but who knows bro. Thanks for watching and for commenting and be sure to subscribe if you have not already.
more guntubers need to follow the Legend Paul Harrell model
What is that model
Always wait a year after the introduction of a new gun. Just ask Smith 10mm peoples.
Well, over the last couple of years I have considered myself very fortunate to have purchased the new releases upon the pistol being initially released and have not had a single issue out of either one of the variants of the S&W 10 mm as well as this one. Unfortunately as a creator, I really don’t have the option of waiting a year to review it because it will have died down by then and I will not be able to maximize the viewership so I have to be the guinea pig which I’m glad to be lol thanks for commenting and please be sure to subscribe if you have not already
Yep
Thanks for watching
So.. after getting it do you like shooting it as much as the regular macro? Think it’s worth the purchase now that you have it
Brother that is extremely tough to answer, but if I must I would lean towards…no. Thanks for watching and commenting and be sure to subscribe if you haven’t already
@@GSquaredTactical yep! Thank you :)
You’ve given me hope. 325 rounds with mine. I’ve had some issues, but it is running better now.
If I can be honest, I only bought it because of all the people saying they had issues because when you trash a gun, it makes for very good views, but it’s hard for me to wish that a gun will fail because I pay for them with my own money And it was completely flawless so that’s what I reported. Thanks for watching and for commenting and please be sure to subscribe if you have not already.
I’ve put 240 rounds through mine…first 60 were before clean & oil. Yet to have a single malfunction. Love it!
I am interested because I love my p365s, but I'll wait a year or 2 to let them work out the problems. Never buy the 1st models of cars and guns. We are beta testing nowadays.
I understand thanks for watching and be sure to subscribe if you haven’t already
I never really understand the whole reliability discussion if a gun has issues the first hundred rounds. 2 of the 5 glocks ive had had a handful of failure to feed issues. The cz's ive owned never had issues. My shadow systems gun had issues the first 50 to 100 rounds then hasnt failed since will all types of ammo. Im not sure what im trying to say. Just throwing it out there.
I get it. I know what you were trying to say. The only two brands left in my safe that have never had a single malfunction are CZ and H&K. I own 17 CZ’s and 8 H&K’s literally every other gun brand I have in my safe I have had at least one with a failure. I personally just am extremely OCD about the function of my firearms from the first round until the 1000 round. But I completely understand what you are saying there are some guns even guns that are not typically known to need breaking in. That will occasionally need to be shot a little bit before they can be considered reliable and I do not suppose there is anything wrong with that, as long as you do the testing thanks for watching and be sure to subscribe if you have not already
I e had my fuse for less than a week now
Back plate broke after less than 50 rounds
Now that’s replaced I’m getting FTF and LPSs
Changed ammo and it runs great
But now I have 1000 rounds that the gun won’t shoot
Which ammo is it that wouldn’t run? Thanks for watching and sharing your experience and be sure to subscribe if you haven’t already
@ the one that won’t run is the cheap wolf gold 124 grain
The ammo that ran flawlessly was my expensive honey badger and my PMC 124 grain fmj
@ I’m so upside down in the fuse now that the only direction I can go is to keep upgrading till it works
@MotorBoating1413 I’ve started running a lot of PMC as well because I’ve had some issues recently with stuff that used to be solid like Fiocchi and even some cheaper stuff like New Republic and BB. I’ve been running a lot of ATS and Igman lately and it’s been very solid and priced well
I'm here for the math.. don't let that woman out of your sights!! Lol
I know that’s right lol. Thanks for watching bro and be sure to subscribe if you haven’t already
Not Cazy about sig but the 365 seen to perform well I got got the xmacro comp so far 500+ rds it has change my mine so time will tell
It’s ok there’s others I like more for sure. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Oh. It's on. 😂
Heck yeah it is. Thanks for watching and for commenting and be sure to subscribe if you have not already.
How is this fuse compared to the Hellcat pro comp ?
I mean, of course the hellcat is more concealable and just overall more carryable, but as far as shootability definitely the fuse is way more accurate and more pleasurable to shoot. Thanks for watching and for commenting and be sure to subscribe if you have not already.
@@GSquaredTactical
Thanks for the reply
I’d love to see a comparison between the Fuse and the Pro comp!
@reptileguy977 I will work on that. Thanks for watching and be sure to subscribe if you have not already
I've put about 500 rounds through mine no miss fire no stove pipes
I am about 350 into this one and have not had any issues with mine either. Thanks for watching and for sharing your experience and be sure to subscribe if you have not already.
Canik, Walther, and CZ triggers make it hard to like any other manufacturers!
That’s the truth bro. Thanks for watching and commenting and be sure to subscribe if you haven’t already
What optic do you have there?
Holosun 407K. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Was any problem mounting 407k
No sir it flush mounted right up. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Just went out and bought that set up
Thanks for the review
@BORN4BIKN yes sir let me know what you think about it. Thanks for watching and for commenting and be sure to subscribe if you have not already.
thanks for the review, another reason or 2 I'm not buying a Sig, except for maybe a 229 Legion compact ...
That’s fair. Thanks for watching and be sure to subscribe if you haven’t already
I want to like this gun but for edc after all I've seen. My life, my wife's life on the line. Nope. I don't feel comfortable with it. As a toy for the range. Sure. But for edc. Nope. 🤷♂️ Just my opinion
Hey man I get it you’ve got to carry what you are comfortable with no questions. Thanks for watching and for taking time to comment and be sure to subscribe if you have not already.
I've let someone shoot my p229 Tac Elite SRT And had ftf issues they would have issues about ever 3rd to 5th Round it shocked me because I've personally never had a malfunction and I would shoot it No Problem Dead on very accurate and I would give it to them and issues it Ended up being Noodle wrists after teaching them how to Hold and Shoot and Presto No more issues! 😳🙄
Limp wristing is a real thing lol. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Too many problems with this pistol. Should have researched it before buying one. I'll stick with my 1911 as a carry pistol.
I’ve been fortunate not to have any issue with mine
Peer pressure ..
Right?
Music sucks.
lol dang bro!! What you think of the gun
@@GSquaredTactical Oh it was the music I couldn't concentrate. Good looking gun and yours seem to be running way better than others, you are one of the lucky ones.
I suppose I am. What did you not like about it? How loud it was or just the music in general
@@GSquaredTactical Just that music in general.
@kawikadee9670 I got you thanks for the feedback