✅ How to Make a Curved Drywall Partition 👉 with Metal Studs

✅ Drywall partition 💪🏼 HOW to Build a Metal FRAMED Wall (70mm profiles) 🤜 • ✅ Drywall partition 💪🏼...
What are partitions?
The partitions are a partition system made up of a metallic structure of horizontal channels attached to the upper slab and to the floor, and vertical uprights embedded in the channels.
One or more laminated plasterboards are screwed to this structure on each side, the quantity, thickness and type of which will depend on the technical needs of the partition itself.
The partitions are used as partition systems for interior rooms. They cannot act as load-bearing walls, but they provide a solution to all the requirements demanded by the CTE of: -Fire protection. -Acoustic isolation. -Robustness and impact resistance. - Quality of finish

[@safetime100]

Very nice, thank you

[@Duncan69]

很好 👍🏼

[@gianncarlov2868]

Amigo buen trabajo 👍
Pregunta que herramienta es la que utilizo para encintar ?

[@sukang5800]

아주 멎집니다 대단합니다

[@jesus3901]

Beautiful job!

[@osjoe2120]

Não tinha visto esse alicate para clicar os montantes, qual o modelo? Muito prático a fixação

[@joemapstv]

Im Watching and i learn something i want to do like this good job idol.

[@Keith-ui4tp]

Tops!!

[@sanglau462]

Master ❤

[@muhammedfazil330]

What type of board is that ?

[@ThePashunya88]

Я использую шуруповерт с саморезами на ленте, лист прикручиваю быстрее и без ускорения)

[@933fukwing3]

So you just using strength to bend the drywall?😮 Not even to pour water?
How about 6mm board? Is it the same? Thx

[@franksachtler4846]

Hallo Herr Kollege
Deine Ausführung ist nur in Teilen richtig.
Eine Trockenbau Wand steht immer auf der Sohle, wegen der Schall Übertragung. Der restiche Ansatz ist okay

[@eb5ua]

Gracias.

[@omersert84]

[@jeramiahwasabullfrog6902]

If you wet the drywall and went sideways you would only have one joint and it would be alot easier and perfectly round?

[@lennydawes3984]

What tool was used to fasten the studs to the track?

[@HaggisMuncher-69-420]

They're rivets

[@Mike61259]

It was much easier for you to finish with Drywall on Ceiling and the wall Next to Curved Metal.

[@walter5401]

Can you give a list of the tools you use

[@dorianbelen]

the pouncher for channel is a stud metal crimper

[@jbdasilva3943]

Há chapa especial para curvatura

[@TheMadManofDRYWALL]

Estes paneles al ser de 6mm y 10 mm se flexionan mucho mejor.

[@annanikamel1323]

Bonjour j'ai aimé votre vidéo et le travail avec est-ce que il y a une formation pour ça ou pas si vous avez un centre de formation en France niveau Île-de-France vous pouvez m'envoyer l'adresse s'il vous plaît

[@user-hb7et2lr9y]

А где шпильки?

[@ThePashunya88]

Видимо на ногах)

[@bjames7741]

Use two layer of quarter inch drywall common sense duhhhh drywall 101

[@antoniorecchia5980]

E non facevi prima a mettere una barra da 50 0 75 pieghevole

[@bjames7741]

Yes your tape measure to make the radius not a string lol BTW never wet the drywall

[@MarkDee1955]

Wetting the back side of the drywall is standard practice in radius drywall applications. Use two layers of 1/4" to make it 1/2" , staggering the joints. Don't wet it so much that the front paper gets wet. It's a trial-and- error process.

[@stuartshields8823]

It was ok watching but I learnt zilch, ur meant to b giving a tutorial, not making a silent movie ?? No worries I’ll find a tutorial

[@EuridezVardevino]

Não é atoa que foi eleito o melhor do mundo e esse Karim 🤌🤌

[@brunomorais1366]

Melhor do mundo.....

[@brunomorais1366]

Quem era o juri ?