Who gives a fuck about chain guards, let the wheel drop to outermost position and stick a smaller-than-tooth sized thing on the rear sprocket, spin the wheel so the thing is at top, adjust other side while the thing is on the sprocket. Done. Takes two steps to tension the chain to exactly the right spec and adjust the wheel.
@connor2k999 That's not true. You can't tell unless you actually measure it yourself. These bikes you should have 3 inch slack in the chain, so quite a lot
love the down shift!
wtf so much torque
Nomm.
@Dragooon7531 suggest you download the ktm manual then.
if u dyno it shows the hp on the wheel right?=
Max Torque Rpm ?Max Hp Rpm?
Who gives a fuck about chain guards, let the wheel drop to outermost position and stick a smaller-than-tooth sized thing on the rear sprocket, spin the wheel so the thing is at top, adjust other side while the thing is on the sprocket. Done. Takes two steps to tension the chain to exactly the right spec and adjust the wheel.
das wel laf! mijne 250 exc tweetakt geeft just hetzelfde :D ik ben nu rond deen blok ne racer aant maken ;) bij welke zaak is dit gedaan?
You have someone sit on the bike and see if you can get 3 fingers in between the chain and where the rubber chain guard is on the frame...... Basic
i hate people who have good bikes and dont know a thing about them
@connor2k999 That's not true. You can't tell unless you actually measure it yourself. These bikes you should have 3 inch slack in the chain, so quite a lot
Hmm, waar is deze testbank te vinden in W-Vl?
how fast?
What mods are on this bike?
what exhaust??
51? i hear like the 520 shoud have a 54.8bhp
This was in 2009
@wiskunst wel minder koppel natuurlijk
Bye bye leg one day
zotte machine :p
@racefactory900 i dont belive you
that is one loose chain