Thanks for such clear process video. Appreciate if advise how to repair potential regulator for 1400 watt Phillips easy go VACUUME CLEANER speed controller.
Hi! I have found your video to be very instructive! I would like to ask please for a comment: I have a similar gc9660 and it had some common buildup of dirt and limestone. As I followed instructions and filled up water directly into the steam metal container, the bottom of the unit leaked a tiny bit of water (something like one cup of espresso coffee size) and then stopped leaking while adding more water again. Unfortunately the unit does not switch on anymore. Would you have suggestions on what to do next? Is there luckily a fuse inside the unit, or would it be most probable to approach the whole PCB and therefore unfortunately aim for a full spare part (I believe it to be expensive)? Many thanks!
First check power cable plug top maybe there is a fuse 13A If not then you need to open steamer unit and then check the thermostat fuse on the boiler if you don't know about electric please don't open it thank you
I have a Hi Steam MVP35 Generator iron. The iron is hot but no steam is there a way to repair this problem without sending off to another state for repairs? at 75 this is an expense that is probably beyond my available budget. Is there possibly a way to purchase parts and have my son do the work.? I cannot afford another one anymore.. I press and sew for my great grands and family and friends and charity.
Worked for me, thanks for the instructions
That’s saved me ££££. Thank you so much.
Hey, thanks for this life saving video. Can you advise what to check for low steam? I disconnected small hose from heater and it just dripping water 😫
Hi.. any solution to.low or almost no steam?.Iron is hot. I hear the sound of the.pump mit extream low steam. Any solution please. Thanks
along with previous question on HiSteam what less expensive brands are easily repairable? With a nice good quality of steam.
Super thank you video for
Thanks for such clear process video.
Appreciate if advise how to repair potential regulator for 1400 watt Phillips easy go VACUUME CLEANER speed controller.
Send me the vacuum cleaner model
Hi! I have found your video to be very instructive!
I would like to ask please for a comment:
I have a similar gc9660 and it had some common buildup of dirt and limestone.
As I followed instructions and filled up water directly into the steam metal container, the bottom of the unit leaked a tiny bit of water (something like one cup of espresso coffee size) and then stopped leaking while adding more water again.
Unfortunately the unit does not switch on anymore.
Would you have suggestions on what to do next?
Is there luckily a fuse inside the unit, or would it be most probable to approach the whole PCB and therefore unfortunately aim for a full spare part (I believe it to be expensive)?
Many thanks!
First check power cable plug top maybe there is a fuse 13A If not then you need to open steamer unit and then check the thermostat fuse on the boiler if you don't know about electric please don't open it thank you
@hennie boomkamp
Worked for me, thanks for the instructions
It is thermo fuse for 265 degrees C. Do you think, this temperature is the same after repair? I do not think so. Where is the safety?
I have a Hi Steam MVP35 Generator iron. The iron is hot but no steam is there a way to repair this problem without sending off to another state for repairs? at 75 this is an expense that is probably beyond my available budget. Is there possibly a way to purchase parts and have my son do the work.?
I cannot afford another one anymore.. I press and sew for my great grands and family and friends and charity.
👏👊
220 volt po ba yung supply ng motorpump na yan sir
What is the two wite color cable it is thermal fuse
Hello, can you please send a link of the part that needs to be replaced? I have no clue where to find it. Thank you
th-cam.com/video/qRmTU9XfW3s/w-d-xo.html
What is the thermostat value please?
Tf260c