I just put it on my S8. Best screen protector I have ever had!!! Removing the air pods was a bit harder (compared to other solutions) but end result is magnificent! And this the first soft screen protector that actually stick to the curve edges and at the same time is really hard to spot that there is anything on top of the screen. Maybe the most important part it that actually keep pretty much same touch feeling, most of the other protectors reduce the responsiveness of the screen (trust me, I tested several different protectors). This is THE PROTECTOR! Highly recommended ;)
I have installed screen protectors myself over the years, but this one takes the biscuit. What was in the packet is/was completely the opposite to the installation video, so wasted both films/protectors
The alignment piece was nothing like the 1 on the video and consequently did not fit my screencover! It was a great idea but was obviously manufactured incorrectly ! This was too expensive for this to happen!
I just used this for someone else's phone and I thought the screen protector was bad, but then I realized that I was supposed to take off the hard plastic layer off. Now I feel so dumb.💀
For $5 this ain’t bad considering how bad screen protectors are with curved displays in general. READ this if you want to get it right on the first protector -Bring your own alcohol wipe since it doesn’t come in the box -DONT use the included sticker as it leaves a stain, if you have extra stickers from different old screen protectors use those -You will probably get these tiny air “pockets” that stick out a bit these went away by themselves after 2 days. The only flaw is the top still has some bubbles on the corners -Most importantly this protector is NOT case friendly and it will slowly start lifting off. Pros: - Good feel for a film protector almost like the actual screen. Cons: Bad accessories, not case friendly, bubbles.
Awful product. As a comment below says, it doesn't even stick to the edges of the screen. I would recommend investing on a glass screen protector instead of this cheap PLASTIC one.
Bought from Amazon for an old S9… too thin ! Don’t know what kind of protection it does provide for smartphone… Bought same from JETech for iPhone seems to provide a little bit better protection. I have a Rhinoshield film protector for my iPhone it is thicker than the one from JETech. Obviously not same price.
This is the worst screen protector I've ever used, and I've used a lot. There were air bubbles everywhere even though I used the smoother as I went. I thought it must have been something I did wrong but no the second one was just as bad. An atrocious product by any definition
Clearly kids understand instructions better than older people. Like wear a mask, don't mess about with large groups of other kids and don't infect your granny. Yup, instruction understanding is a great thing.
You know what would help is if you can speed up this video. I recommend at least 2x, maybe 4x just so we can miss it all and waste less time. Also, make sure the video shows a different product from the one in the title, which should not be very hard since this video is 4 years old. Oh yea, make sure your stickers say the same thing for both steps 1 and 2 and just omit any other stickers you don't feel like putting on your product anymore. Even tho they seem to have a real purpose installation.
C’est une blague ce produit? Le plus mauvais que j’ai jamais utilisé. Beaucoup de manip pour un film qui se pose de travers car il s’étire et se décolle sur les bords...
You obviously didn't follow exactly the instructions and messed something up. I applied mine flawlessly. Sticked perfectly and not one single bubble. Has been over a month now....still all good.
I just put it on my S8. Best screen protector I have ever had!!! Removing the air pods was a bit harder (compared to other solutions) but end result is magnificent! And this the first soft screen protector that actually stick to the curve edges and at the same time is really hard to spot that there is anything on top of the screen. Maybe the most important part it that actually keep pretty much same touch feeling, most of the other protectors reduce the responsiveness of the screen (trust me, I tested several different protectors). This is THE PROTECTOR! Highly recommended ;)
Seriously? Genius product with an even better video. Thank you.
Great video but please doit abit slower next time. Thanks
I have installed screen protectors myself over the years, but this one takes the biscuit. What was in the packet is/was completely the opposite to the installation video, so wasted both films/protectors
What is this sorcery
The alignment piece was nothing like the 1 on the video and consequently did not fit my screencover! It was a great idea but was obviously manufactured incorrectly ! This was too expensive for this to happen!
Went on smooth, looks great. Good purchase.
I just used this for someone else's phone and I thought the screen protector was bad, but then I realized that I was supposed to take off the hard plastic layer off. Now I feel so dumb.💀
c le l'objet le plus satisfaisant que j'ai acheté sur amazon, vraiment rien à dire, c parfait !
For $5 this ain’t bad considering how bad screen protectors are with curved displays in general. READ this if you want to get it right on the first protector
-Bring your own alcohol wipe since it doesn’t come in the box
-DONT use the included sticker as it leaves a stain, if you have extra stickers from different old screen protectors use those
-You will probably get these tiny air “pockets” that stick out a bit these went away by themselves after 2 days. The only flaw is the top still has some bubbles on the corners
-Most importantly this protector is NOT case friendly and it will slowly start lifting off.
Pros: - Good feel for a film protector almost like the actual screen.
Cons: Bad accessories, not case friendly, bubbles.
Awful product. As a comment below says, it doesn't even stick to the edges of the screen.
I would recommend investing on a glass screen protector instead of this cheap PLASTIC one.
Bought from Amazon for an old S9… too thin ! Don’t know what kind of protection it does provide for smartphone…
Bought same from JETech for iPhone seems to provide a little bit better protection.
I have a Rhinoshield film protector for my iPhone it is thicker than the one from JETech. Obviously not same price.
This is the worst screen protector I've ever used, and I've used a lot. There were air bubbles everywhere even though I used the smoother as I went. I thought it must have been something I did wrong but no the second one was just as bad. An atrocious product by any definition
You obviously didn't follow instructions properly I'm a kid and it was simple
Clearly kids understand instructions better than older people. Like wear a mask, don't mess about with large groups of other kids and don't infect your granny. Yup, instruction understanding is a great thing.
You know what would help is if you can speed up this video. I recommend at least 2x, maybe 4x just so we can miss it all and waste less time. Also, make sure the video shows a different product from the one in the title, which should not be very hard since this video is 4 years old. Oh yea, make sure your stickers say the same thing for both steps 1 and 2 and just omit any other stickers you don't feel like putting on your product anymore. Even tho they seem to have a real purpose installation.
Der absolute Scheiß!
C’est une blague ce produit? Le plus mauvais que j’ai jamais utilisé. Beaucoup de manip pour un film qui se pose de travers car il s’étire et se décolle sur les bords...
Waste of money sides will not stick to curved edge and it's pretty much impossible to remove stickers without leaving marks
You obviously didn't follow exactly the instructions and messed something up. I applied mine flawlessly. Sticked perfectly and not one single bubble.
Has been over a month now....still all good.