The installation went fairly well. Still got bubbles around the holes for the cameras at the top of the phone. As for the JETech product, great idea to keep the phone from moving around while you install the screen protector. However, if you get 2 screen protectors in one box (and you will), you'd better be prepared to use both of them at the same time (e.g. you have 2 phones), because you won't be re-using the charging port application tool twice. The glue strip separates from the tool when you try to remove it, rendering it useless unless you (1) leave it in place on your table top until you need it again, or (2) you find another glue strip to reattach it in the future. JETech should've provided 2 tools (or another glue strip) for those of us who only have 1 phone...which is just about everyone!
Great idea with the charger port applicator tool that made it so much easier than trying to line it up by eye. I'll definately be recommending this to everyone
It took 2 attempts to do mine, so wasted the first one, The step at about 29 seconds, once you have peeled off the top section and stuck it down, I didnt' see that you then need the white card with the thick end on the phone as as you un-stick the next bit you have to push the white card along the phone which gets out 99% of all the bubbles. Then when you peel the last piece off there are only tiny bubbles on the edges to remove with the card. Its a clever idea and the USB plugin port to keep in stable is really clever.
This is just impressive. I put this on an really cracked screen (a bottle fell directly in the center of my phone screen, and it shattered) and there's no bubbles, even in the ridges created by the glass shattering.
Wow, just wow. Thank you so so much. I've never used one like this before... I love it! With this video, I had nooooo problems get it on perfect. I definitely prefer these over there glass ones! Thanks a bunch.
I just used this on my wife's S10e and the charging port applicator template is genius. I don't know about everyone else, but this was the best, easiest experience I've had applying a screen protector ever. I'm trying to find one for my phone now, too.
Very glad it came with 2 screen protector because the first time I tried it was a bust. And a lot of waste. But yes! Few bubbles and it's all stuck to my screen! Not bad!
worked perfectly for my s9+. One would need to watch the video a few times to ensure its done properly. Once has to ensure that glass is really clean. The sticky paper should be use to clear the dust of the screen and then use a cloth with isopropyl alcohol to clean the under side of the protector iself. Alot of dust gets collected via static on the surface.
Best experience with a screen protector so far! Shattered my screen, and way too expensive to fix (S9), so this has made it possible to use again without making micro cuts to my fingers every time haha
When you perform the step at 44th second, please make sure your screen protector is glued at the bottom and not coming off along with the applicator. My first screen protector one came off, did it right on 2nd attempt.
Getting the top and bottom "holes" lined up is a bit of a bear as the protector is extremely slippery on the screen. The "hinge" is not exactly precise either in getting them relined up for final application. Make sure your tape is matched up evenly, precisely, and securely to avoid mis-application and frustration. Might even be best to have two sets of hands to work the whole process.
I'm impressed! The installation worked perfectly (following the steps from the video) and the result is amazing. The whole screen is covered and when you're doing it right you can barely see the screen protector. I hope the protector will do its job and and that the quality lasts.
Great video and amazing product. At first watch I thought it was overly complicated, but I quickly changed my mind. Each step is clearly documented (and necessary). Follow the steps and it'll work perfectly.
Excellent tutorial. Never been successful applying a screen protector before and always make a mess of it. Watched this video three times and did a perfect job in under a minute. No bubbles, no mistakes.
Complely bodged up my first protector however the second worked a dream... Can't even tell it's on there. Make sure u watch the video first however as instructions don't make it clear
Must agree. Quite tricky and impossible to watch the video while applying the screen protector at the same time. Some written instructions would have been better.
ich habe den protector auf mein leider kaputtes S8 draufgemacht weil der bildschirm mittlerweile scharfe gefährliche kanten aufweist. trotz der krassen risse konnte ich alles problemlos auftragen und man sieht die folie quasi gar nicht! klasse! nun kann ich mein Handy wieder normal benutzen ohne ständig mich schneiden zu müssen :D
The explaining ad is nice but the black grip shown that sits in the charging point is not provided with the screen protector that I bought. It is extremely difficult without it.
Super easy installation, just did it on a Pixel 7 Pro. Just do exactly as in the video. The alignment is already done via the alignment tool. The screen protector also fits perfectly with a Spigen Liquid Air. Fingerprint scanner still works as before and the front camera's quality isn't affected from what I tested.
The last part when you peel the label 3 ripped all the protection away and didn't let it on the phone like in the video. Made me start all over again with the other label already off which ruined the protection.
Hands down the easiest, fastest application I've ever had Just installed this on my S10e and it was completely stress free on the first try. Instructions are super precise and as long as they are followed anyone can get a bubble free, clean look on their screens; I was amazed at how seamless it is. Would 10/10 recommend!
The charging port holder is very smart and a good idea. But the screen protector isn't very good, on the sides of the phone it doesn't stick to the curve and sits above the phone cover. I am very disappointed and expected more because of the month I waited for it.
Bei mir hat die Installation nicht gut funktioniert. Es ist schon beim ersten Step gescheitert und dann ist es nur mehr Bergab gegangen weil sich die Schutzfolien so schwer ablösen lassen. Habe Luftblasen unter der Folie die sich nicht entfernen lassen.
Turn off the sound and situate your phone just as it shows in the video. You may have to pause and rewind a few times but I had no difficulty. If you have ever "peeled vinyl" you will understand it easily!
Not that bad,but I had to watch with my tablet pause by pause. Let me share something I discover:dry sheets. They are great for a lot of things and in this case,to repel dust.
One of the Best screen protector. Does scratch and mark easy thought but for the simple perfect install. It's one of my favourites on a curved display. My favourite has to be screenkight. But it's Wet applied and it doesn't scratch as easy but it takes ages to install.
@@rb1093 my second attempt...bang on perfect (first I didn't read instructions) u got to read it or u fail.. I also didnt recieve the "holding alignment " device first time round . .but this product is great finish to it... other tpu protection they dry up n get dust on the curves.. this is shit hot protector if applied correctly...
I have had so many phones and screen protectors 😂 I'm on my 4th phone this week. So first time every time. The biggest down side is how easy it deep scratches but it was £3 same day delivery from Amazon so can't complain
Con: hard to apply without bubbles, no really written manual Pro: camera protetor included, the idea with the alignment by using the charging port is genius but I won't buy them again because of the bubbles (Google Pixel 7 Pro)
Either I'm a total idiot or this is incredibly hard. Could not peel that first label off for the life of me. Wouldn't come away. Wasted both protectors now left having to get another. Also left feeling very sad.
The product is not easy to use even with the instruction video. It doesn’t feel like a screen protector just a plastic on your screen. I bought the product twice. I tried to do it four times and failed every time. It left bubbles everywhere & when I tried to smoothen it, it made it worse by creating scratch marks. It’s not easy to use at all. Do not recommend at all!
#1 my dock sticker came off onto the peeler, #2 the 1st screen protector had a lump in it, #3 the 2nd screen protector was scratched by the "bubble removing card. Load of shite
tried both attempts and got a ton of air bubbles that u cant remove, waste of money, you can literally touch it with the edge of your palm and it leaves a scratch
Bought it for my Samsung Galaxy Note 10 but its NOT even better than the original protector that comes with the phone.... And the installation is quite difficult, many small bubbles and the selfie camera ended up being a bit covered by the protector. I think the company tries hard to deliver a good service but failed.
are we all here because of how horrendous and complicated the instructions are... ? i messed up my firsdt attempt. hopefully this video will help as only 2 in the pack!
Bubbles are inevitable. You'll never, ever get a flawless application with these types of screen protectors. Anyone who says otherwise is simply lying our their ass.
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
The installation went fairly well. Still got bubbles around the holes for the cameras at the top of the phone. As for the JETech product, great idea to keep the phone from moving around while you install the screen protector. However, if you get 2 screen protectors in one box (and you will), you'd better be prepared to use both of them at the same time (e.g. you have 2 phones), because you won't be re-using the charging port application tool twice. The glue strip separates from the tool when you try to remove it, rendering it useless unless you (1) leave it in place on your table top until you need it again, or (2) you find another glue strip to reattach it in the future. JETech should've provided 2 tools (or another glue strip) for those of us who only have 1 phone...which is just about everyone!
I didn't use the glue strip on the charging port tool, and it worked fine.
Great idea with the charger port applicator tool that made it so much easier than trying to line it up by eye. I'll definately be recommending this to everyone
It took 2 attempts to do mine, so wasted the first one, The step at about 29 seconds, once you have peeled off the top section and stuck it down, I didnt' see that you then need the white card with the thick end on the phone as as you un-stick the next bit you have to push the white card along the phone which gets out 99% of all the bubbles. Then when you peel the last piece off there are only tiny bubbles on the edges to remove with the card. Its a clever idea and the USB plugin port to keep in stable is really clever.
Good quality, and the application was seamless with the charger port applicator. Genius!
This is just impressive. I put this on an really cracked screen (a bottle fell directly in the center of my phone screen, and it shattered) and there's no bubbles, even in the ridges created by the glass shattering.
Wow, just wow. Thank you so so much. I've never used one like this before... I love it! With this video, I had nooooo problems get it on perfect. I definitely prefer these over there glass ones!
Thanks a bunch.
One of the best screen protectors that I have used....and so easy to install
I just used this on my wife's S10e and the charging port applicator template is genius.
I don't know about everyone else, but this was the best, easiest experience I've had applying a screen protector ever. I'm trying to find one for my phone now, too.
I feel you, this brand is the best experience for screen protectors! I love it, and mine had 2 of them so I have changed it since 3 years or so hahha
Was a little disappointed it didn't come with alcohol wipes like most others do but otherwise yeah it's pretty standard
Very glad it came with 2 screen protector because the first time I tried it was a bust.
And a lot of waste.
But yes! Few bubbles and it's all stuck to my screen! Not bad!
worked perfectly for my s9+. One would need to watch the video a few times to ensure its done properly. Once has to ensure that glass is really clean. The sticky paper should be use to clear the dust of the screen and then use a cloth with isopropyl alcohol to clean the under side of the protector iself. Alot of dust gets collected via static on the surface.
Followed all the instructions and still have loads of little air bubbles, im going to try another product
Really impressed! I read the instructions and watched this video, et voila! Magnifique 💫
Excellent product... video was just fine shows exactly what your meant to do ... good work JETech
Best experience with a screen protector so far! Shattered my screen, and way too expensive to fix (S9), so this has made it possible to use again without making micro cuts to my fingers every time haha
Best brand of screen protector, best experience, I love this brand, won't change it for any other 💕
Very easy to apply, a bit on the thin side but I'll see how it goes.
When you perform the step at 44th second, please make sure your screen protector is glued at the bottom and not coming off along with the applicator. My first screen protector one came off, did it right on 2nd attempt.
Getting the top and bottom "holes" lined up is a bit of a bear as the protector is extremely slippery on the screen.
The "hinge" is not exactly precise either in getting them relined up for final application.
Make sure your tape is matched up evenly, precisely, and securely to avoid mis-application and frustration.
Might even be best to have two sets of hands to work the whole process.
Grazie!! Ho applicato perfettamente la pellicola come in video💪👍🤗
Just did it and I'm no way a professional useless generally tbh and it worked well. I give it 95% 👍
Why not 100%? What complaint did you have?
@@icantmemorize7703 I use a case for my phone. At the bottom left and right corner there is 2 big bubbles have risen.
Amazing screen protector no bubbles at all. Its amazing how far this technology has come. Messed up the first due to poorly follow instructions.
Worked pretty well👍 Botched my display and now I can use it again. Thanks
Absolutely brilliant. I messed up a different screen protector but this one went on perfectly. Of course I watched the video first.
I'm impressed! The installation worked perfectly (following the steps from the video) and the result is amazing. The whole screen is covered and when you're doing it right you can barely see the screen protector. I hope the protector will do its job and and that the quality lasts.
Great video and amazing product. At first watch I thought it was overly complicated, but I quickly changed my mind. Each step is clearly documented (and necessary). Follow the steps and it'll work perfectly.
Excellent tutorial. Never been successful applying a screen protector before and always make a mess of it. Watched this video three times and did a perfect job in under a minute. No bubbles, no mistakes.
Thank you for this important video
Do I have to take the outer case I installed? It is just because as it is a diy,I don't want to mess it up
Jfc didn't expect this to be such a production
Complely bodged up my first protector however the second worked a dream... Can't even tell it's on there. Make sure u watch the video first however as instructions don't make it clear
Not as easy as it looks on the video. Messed up both times, trying to get rid of air bubbles
Air bubbles should go away on their own in a day or 2, at least the small ones
i did it high.
I have bubbles because the particles from the cleaner got stuck. Now I don't know what to do.
Video is informative but way to quick but better than nothing.
Must agree. Quite tricky and impossible to watch the video while applying the screen protector at the same time.
Some written instructions would have been better.
¡¡¡Perfecto!!!
ich habe den protector auf mein leider kaputtes S8 draufgemacht weil der bildschirm mittlerweile scharfe gefährliche kanten aufweist. trotz der krassen risse konnte ich alles problemlos auftragen und man sieht die folie quasi gar nicht! klasse! nun kann ich mein Handy wieder normal benutzen ohne ständig mich schneiden zu müssen :D
It's really easy to mess up you have to be really careful other than that 10/10
What a great product.
The explaining ad is nice but the black grip shown that sits in the charging point is not provided with the screen protector that I bought.
It is extremely difficult without it.
Wow! So easy and perfect result!
Followed the instructions but still have bubbles :(
thank you for this video
Ich bin begeistert. Die Folie ließ sich super aufbringen und man sieht sie nicht. Erst jetzt fühle ich mein neues Smartphone richtig sicher.
Super easy installation, just did it on a Pixel 7 Pro. Just do exactly as in the video. The alignment is already done via the alignment tool. The screen protector also fits perfectly with a Spigen Liquid Air. Fingerprint scanner still works as before and the front camera's quality isn't affected from what I tested.
Mine didn't come with the attachment piece...
I messed up the first time, but the second time I got it right. I like it a lot, better than the neo flex by spingen imo
Best screen protector for S23 ultra if you’re using otterbox covers.
The last part when you peel the label 3 ripped all the protection away and didn't let it on the phone like in the video. Made me start all over again with the other label already off which ruined the protection.
Screen protector does not stick to sides and has many bubbles under the surface.
Hands down the easiest, fastest application I've ever had
Just installed this on my S10e and it was completely stress free on the first try. Instructions are super precise and as long as they are followed anyone can get a bubble free, clean look on their screens; I was amazed at how seamless it is. Would 10/10 recommend!
Even with this process, still got bubbles. And it's not my first time doing that. 6/10 overall
Confusing but got it in the end
Good work. This works well. I'm not that great at it but the instructions are gr8
which way up?
The charging port holder is very smart and a good idea. But the screen protector isn't very good, on the sides of the phone it doesn't stick to the curve and sits above the phone cover. I am very disappointed and expected more because of the month I waited for it.
Great way to align, but got tons of bubbles. Just get it fitted in a shop
woah this went so smooth for me
Next time i get these ill get a shop to install it, i messed up on both :(
Bei mir hat die Installation nicht gut funktioniert. Es ist schon beim ersten Step gescheitert und dann ist es nur mehr Bergab gegangen weil sich die Schutzfolien so schwer ablösen lassen. Habe Luftblasen unter der Folie die sich nicht entfernen lassen.
Can I get a refund all I can see is bubbles and could you get me a new phone
Hi, for customer service, please call 800-266-9986. Our team will help you.
A new phone? Lmao
my s7 dont plug in the stabilisator
Turn off the sound and situate your phone just as it shows in the video. You may have to pause and rewind a few times but I had no difficulty. If you have ever "peeled vinyl" you will understand it easily!
Good idea but doesn't work as good as harder material which doesn't leave air bubbles behind, this does
These are so bad, when peeling off sticker one the protection film comes off with it. Twice in a row so now.
Yeah, i have a huge bubble in mine, the sides don't stick properly... kinda bullshit
I want my money back
Why?!
Not that bad,but I had to watch with my tablet pause by pause. Let me share something I discover:dry sheets. They are great for a lot of things and in this case,to repel dust.
La pieza de plástico que hay que meter en el conector de carga del teléfono no entra
Its actually quite easy to do..
One of the Best screen protector. Does scratch and mark easy thought but for the simple perfect install. It's one of my favourites on a curved display. My favourite has to be screenkight. But it's Wet applied and it doesn't scratch as easy but it takes ages to install.
@@rb1093 my second attempt...bang on perfect (first I didn't read instructions) u got to read it or u fail.. I also didnt recieve the "holding alignment " device first time round . .but this product is great finish to it... other tpu protection they dry up n get dust on the curves.. this is shit hot protector if applied correctly...
I have had so many phones and screen protectors 😂 I'm on my 4th phone this week. So first time every time. The biggest down side is how easy it deep scratches but it was £3 same day delivery from Amazon so can't complain
Con: hard to apply without bubbles, no really written manual
Pro: camera protetor included, the idea with the alignment by using the charging port is genius
but I won't buy them again because of the bubbles (Google Pixel 7 Pro)
I can't even tell there's a screen protector in it. Very cool!
Can't get rid of the bubbles 😢
Either I'm a total idiot or this is incredibly hard. Could not peel that first label off for the life of me. Wouldn't come away. Wasted both protectors now left having to get another. Also left feeling very sad.
Wasnt as good as for the Iphone 13... its okay but I'm not satisfied. Have around 5-6 Bubbles that are stuck
I just don't see how this screen protector will keep my phone safe it is very thin and left many irritating air bubbles
Am I being dumb? The last step removes the screen protector?
Thats just another layer protecting the actual screen protector
@@flo7968 yeah realise that now, instructions don't make it very clear so wasted both of them
@@cgrusty8351 Oh, i'm sorry to hear that. I see where your confusion came from though
Safe to say the JETech screen protector will be my go to screen protector.
This isn't a screen protector. Simply a layer of film.
Super easy to install thanks a lot!
I give it 9/11
Nearly 1,000 dislikes.... that says alot. Plenty of bubbles on mine still sadly.
The product is not easy to use even with the instruction video. It doesn’t feel like a screen protector just a plastic on your screen. I bought the product twice. I tried to do it four times and failed every time. It left bubbles everywhere & when I tried to smoothen it, it made it worse by creating scratch marks. It’s not easy to use at all. Do not recommend at all!
Didn't get the charge port applicator in the pack 👎
The plastic film is VERY SOFT, leaving marks and scratches
#1 my dock sticker came off onto the peeler,
#2 the 1st screen protector had a lump in it,
#3 the 2nd screen protector was scratched by the "bubble removing card.
Load of shite
tried both attempts and got a ton of air bubbles that u cant remove, waste of money, you can literally touch it with the edge of your palm and it leaves a scratch
Nice 🔥🔥🔥🔥🔥
The music was so relaxing
Wow, that was the easiest and stress free application of a screen protector yet! Will definitely buy one of these again if I need to.
Bought it for my Samsung Galaxy Note 10 but its NOT even better than the original protector that comes with the phone.... And the installation is quite difficult, many small bubbles and the selfie camera ended up being a bit covered by the protector. I think the company tries hard to deliver a good service but failed.
are we all here because of how horrendous and complicated the instructions are... ? i messed up my firsdt attempt. hopefully this video will help as only 2 in the pack!
I try it for the first time and the results are amazing, no bubbles. Thanks 💪
this has to be one of the most over complicated installation processes ever, also is so hard to get it right. bad producty
Dust is my enemy....
I should have just went with fucking tempered glass😤
The most hardest thing to put on. Many air bubbles and just didn't work at all. Just to complicated for just a screen protector!
Nehmt ein (Voll)Bad oder duscht ausgiebig 》die hohe Luftfeuchtigkeit bindet die Staubpartikel & das hilft etwas !
Take a bath !
Bubbles are inevitable. You'll never, ever get a flawless application with these types of screen protectors. Anyone who says otherwise is simply lying our their ass.
Why make it so complicated, I have so many bubbles it's aweful
Far too many bubbles, back to amazon it is...
How about noooo
Messed it up twice 😂😂 shit
Se me queda burbujas joder
d
air bubbles everywhere
second chance better but still several small bubbles. It is what it is
Awful product. Very thin bit of plastic which is very easily scored and left multiple air bubbles when fitting. Avoid
It will not go on as easy as the video. Lots of air bubbles. Should just be a video of someone laughing at you for buying their product.