Here in Hawaii lotta people have two strokes they’re so expensive though obviously for reasons I just started getting into modeling, luckily I scored two abandoned QMB 139, the Chinese motor I got in it now is a 39 cc Chinese engine not GY6. Bit of a bummer this Chinese man sold me a severely under powered moped I’m in the process of cleaning the QMB 139.
Hello. I enjoy watching the video. There's a zirmun. The engine says 161qml, but I want to know the displacement of this engine and whether it's a long or short type
I know this is a ruckus gy6 channel but I have an issue . I think the cylinder on my pit bike blew it’s a 150cc and I wanna just swap it rather then open it up . Can I just swap another 150cc or not it ? Or is there a specific one
Hey brother I have a question, would I be able to fit the 50cc Honda engine that comes on those bikes? Looking to do a resto mod on my Honda express nc50 by installing a new engine on but still keep the original look on the bike. What would be the dimensions for the mounting for the engine measure at? Thanks for the video, entertaining and helpful as always stay well.
I got a brand new tao Tao racer 50. With like 70 miles on. It but when I try to go full throttle it bolgs sometimes out like it doesn’t try to get full power what do you think hit me back please
hi. help me please. i have 80ccm motowell elenor 4T euro4 injector. the problem; no idle. low rpm, when the motor is idle, unfortunetly shut down... ;( always shut down... and i kickstart again and again and forewell. not enough gas? too poor injection?
When I did my stretch I looked into getting that PWDJDM mount. It looked so cool but 2.5 years ago there was barely any info out on them. They look awesome tho
Honestly there is no information that I am willing to pay for I will just keep researching until I find it but I can talk to you live like having a pocket mechanic in your pocket pun intended whenever you need them.
Who wouldn’t want this or even better if your channel had a forum where people could go and leave messages and communicate and share tips and ideas this will introduce traffic to your site.
I've asked everyone about my 03 kymco super 9 lc I need help with top speed what do I do after the malosi 70cc big bore kit top speed now is about 49 I want to get about 60mph what can I do lol I know nothing about these things! Also where can I get part for this thing I'm having a hard time finding gear upgrades and other transmission parts
A quick way to run a cable exactly where your old cable is to zip tie or twist tie the top end of the old cable to the bottom of the new. Then pull from the back side of the old cable until the top of the new cable is where it needs to be. Then snip off the zip/twist ties.
Thanks for the input, that’s gonna be difficult by my self adjusting the lens and working at the same time. Although I did upgrade my camera. It has more focus points. Hope it helps .
The Hub that was on the Ruckus was mounted on a long shaft and a long shaft destroyed the Hub it wobbled so bad at night I had a hard time getting the hub off of the axle
Some people call the China 50cc motor a GY6 50, this is actually called a qmb139. If you are referring to a qmb139 (50cc) to GY6 (150) then no :-( . The qmb mounts from the bottoms and the GY6 from the top. Buuuut if you are talking about the stock Ruckus 50cc. Then yes ! :-)
Honestly I like your channel I like the info but I think you pay wall gating your videos is unnecessary you are just turning away potential customers maybe those people who want to check something out in your video but they cannot see the full video unless they pay I don’t care about The prices that you give those are trivial but I need to know information before I make my mind for purchase and if you have your videos gated I’m just gonna go somewhere else.
I meant to say I don’t care about the prize a person gets for answering a correct question I think what you need is a segment where it’s like this make your videos available all of them but have a special Patreon videos where it’s a hands-on one on one ask you anything, is great for newcomers to get into the modding scene. your set up now is pay you monthly for videos I can find those same videos if I really wanted to the information might come across slightly different but it’s the same information.
![Honda Ruckus GY6 Engine install [Part 4] BUILD SERIES](http://i.ytimg.com/vi/SPA4MkH1JZk/mqdefault.jpg)
![Honda Ruckus GY6 Engine install [Part 4] BUILD SERIES](/img/tr.png)
![GY6 Ruckus SIMPLE wiring [PART 5]](http://i.ytimg.com/vi/St0BlVaLyfQ/mqdefault.jpg)
![HOW TO GY6 SWAP A RUCKUS - parts you will need [LIVE]](http://i.ytimg.com/vi/O9r2gpwTS0U/mqdefault.jpg)
![How to stretch a tire [Honda Ruckus GY6 swap] PART 3](/img/n.gif)
All of you guys who do tear down and rebuild our vital to me until I can get past that learning curve.
I own a 2019 Zuma 50, BUT I support all your scoot videos...
Sweeeet! The Zuma 50F is a fun scoot! Thanks for the support 🙏
Here in Hawaii lotta people have two strokes they’re so expensive though obviously for reasons I just started getting into modeling, luckily I scored two abandoned QMB 139, the Chinese motor I got in it now is a 39 cc Chinese engine not GY6. Bit of a bummer this Chinese man sold me a severely under powered moped I’m in the process of cleaning the QMB 139.
Rolling wrench idol I alway watching you that cool vids and nice tutorials thnks
Thank you for the support! I appreciate you
Just got done watching the build another great job I’ll bet you that sucker is fast👍👍👍
Thanks for watching! Heck ya! The GY6 wakes it up for sure :-)
I love how you just get on with the job at hand! No talking shop for 30 minutes first just right down to business! Great videos.
Thanks John for the positive comment 🙏. Thanks for the support
Hello good night I have 49 cc Honda ruckus bike I am here in Guyana 🇬🇾 you guys have parts on sale like computer. Box wire harness for the ruckus
Super good job 👏
This makes it want to buy this kit for the wife’s ruckus
It’s a sweet kit! A lot smoother ride with this mount. It utilizes the rubber bushings on the stock frame
Rolling Wrench 99% there on my decision
What happens to the trike build you doing
Hello. I enjoy watching the video. There's a zirmun. The engine says 161qml, but I want to know the displacement of this engine and whether it's a long or short type
I can’t seem to find Part 3 of this series?
here in japan and want to take a JDM ruckus back with me.... if i could find one
I know this is a ruckus gy6 channel but I have an issue . I think the cylinder on my pit bike blew it’s a 150cc and I wanna just swap it rather then open it up . Can I just swap another 150cc or not it ? Or is there a specific one
So cant you just get this kit with the shorter axle already installed?
🔥🔥🔥🔥I need one of these, what is the price
Sometime next year i do same thing upgrade ruckus clone to 150cc!!
its not the same....
@@EbolaSquirrel why not its a clone too! TKC 50cc trike honda ruckus clone!
Hey brother I have a question, would I be able to fit the 50cc Honda engine that comes on those bikes? Looking to do a resto mod on my Honda express nc50 by installing a new engine on but still keep the original look on the bike. What would be the dimensions for the mounting for the engine measure at? Thanks for the video, entertaining and helpful as always stay well.
Is the efi model any different to the carburettor model of ruckus ? I am looking at buying one in the UK and I will be doing the gy6 engine swap
I got a brand new tao Tao racer 50. With like 70 miles on. It but when I try to go full throttle it bolgs sometimes out like it doesn’t try to get full power what do you think hit me back please
hi. help me please. i have 80ccm motowell elenor 4T euro4 injector. the problem; no idle. low rpm, when the motor is idle, unfortunetly shut down... ;( always shut down... and i kickstart again and again and forewell. not enough gas? too poor injection?
When I did my stretch I looked into getting that PWDJDM mount. It looked so cool but 2.5 years ago there was barely any info out on them. They look awesome tho
looking for the gy6 swap kit ......great videos ....may be I'm way to late
Honestly there is no information that I am willing to pay for I will just keep researching until I find it but I can talk to you live like having a pocket mechanic in your pocket pun intended whenever you need them.
Who wouldn’t want this or even better if your channel had a forum where people could go and leave messages and communicate and share tips and ideas this will introduce traffic to your site.
Do you have a shop/store front or is it all online only?
We have a commercial space. But only do online
@@RollingWrench no chance of in person pick up if I am local? COS area.
Please give me a website so I can order this! 👍🏻👊🏻👍🏻
www.rollingwrenchdenver.com/collections/gy6-swap/products/complete-honda-ruckus-gy6-swap-kit
Where do you buy the kit engine
im waiting episode 3 may be upload next again idol
Same ❤️❤️❤️
Do you plan such a kit for other Scooters too?
Yes, we will add more in time :-) thanks for the support 🙏
What about icebear maddog ruckus clone that is 49cc
LMAO dude its a complete different topic
How much does a ruckus frame cost unpainted
Around $300
I can’t wait to do this to my Ruckus this winter. Planning on buying the kit from you guys and doing the 171 big bore kit as well!!
Sweeet! You will love it! Add our EFI system to your budget, you won’t regret it
I’ll do some research and maybe add that to the list!
same! gotta save until april though.
I've asked everyone about my 03 kymco super 9 lc I need help with top speed what do I do after the malosi 70cc big bore kit top speed now is about 49 I want to get about 60mph what can I do lol I know nothing about these things! Also where can I get part for this thing I'm having a hard time finding gear upgrades and other transmission parts
I would recommend final drive gears. I can get them for you. Just email us.
A quick way to run a cable exactly where your old cable is to zip tie or twist tie the top end of the old cable to the bottom of the new. Then pull from the back side of the old cable until the top of the new cable is where it needs to be. Then snip off the zip/twist ties.
Great tip!
How much is one of the GY6 kits
Can i customize like you withoute changing engine?
Very Great job but now Im blind ur focus got me all f@##$ up
I learn as I go :-). More experience and better equipment leads to better videos. Still learning …..
@@RollingWrench great job tho ? Can I just buy the motor with all the bells.
It's official I'm blind 😂😂😂
🤩🤩🤩🤩🤩🤩🤩🤩
Hey Rolling Wrench... Question ?
Can you upgrade to the gy6 150cc+ and keep the backup kickstart for emergencies ??
Thanks.
the gy6 cvt has a kickstarter on it
Could I do a gy6 171cc non stretch swap on my ruckus?
Yes:
www.rollingwrenchdenver.com/products/honda-ruckus-gy6-conversion-kit-oem-look
UNO APRENDE MUCHOS CON TUS VIDEOS SALUDOS DESDE VENEZUELA
Can u put one on a Ice Bear Maddog????🤔
No, it has a much different frame
@@RollingWrench is there much customizing that I can do w an Ice Bear Maddog?
Brether from oil and breather from head they shoul be attached or not? Did't quite shure from your explanation.
Make sure the gear box breather and head breather are not attached.
@@RollingWrench thanks
I like gy6,and l have the duke125 since 1997.
Perfect 👌 the Duke awesome! Thanks for the support dude!
This kit is sold out
Only because the wheel is back ordered :-( of you want the kit minus the wheel let me know :-)
Do you need to get a gy6 to do the stretch or is there a kit to stretch with the stock motor? Love the videos man btw
Thanks for the support 🙏. Here is a mount to stretch the stock engine:
www.rollingwrenchdenver.com/products/honda-ruckus-stretch-mount-by-mojo
Dope swap but please get rid of auto focus I miss most of your videos because of it
Thanks for the input, that’s gonna be difficult by my self adjusting the lens and working at the same time. Although I did upgrade my camera. It has more focus points. Hope it helps .
@@RollingWrench good point thanks for the great content can't wait to get my build under way! With out your videos I'd be lost
Scott Richardson thanks for the support 🙏
Can u do it with no stretch? I think the stretch looks dumb :(
I have a no stretch build series
@@RollingWrench :D
james brady Honda Ruckus GY6 conversion kit (stock look) th-cam.com/video/_0dWMiuwF5Y/w-d-xo.html
Where can I get the fatty Hub and how much are they
Fatty mount and hub? Or just a hub?
Just a hug please
The Hub that was on the Ruckus was mounted on a long shaft and a long shaft destroyed the Hub it wobbled so bad at night I had a hard time getting the hub off of the axle
@@edselcobb9554 www.rollingwrenchdenver.com/products/gy6-scooter-wide-tire-hub-adaptor
It's for a GY6 long case
Can you do a 50cc gy6 to a 150cc swap without welding?
Yes
Some people call the China 50cc motor a GY6 50, this is actually called a qmb139. If you are referring to a qmb139 (50cc) to GY6 (150) then no :-( . The qmb mounts from the bottoms and the GY6 from the top. Buuuut if you are talking about the stock Ruckus 50cc. Then yes ! :-)
@@RollingWrenchI meant the 139qmb, but is there any bolt in place mount you can install
Ништяк, чувак!
Post more please
🤘🏻 I’ll post another next week
This is the best video!! Very detailed 👏
Thanks for the support. Let us know if you need anything for your swap.
I'm the person who can't afford you to help me with ruckus motorcycle ruckus, please Sir
Honestly I like your channel I like the info but I think you pay wall gating your videos is unnecessary you are just turning away potential customers maybe those people who want to check something out in your video but they cannot see the full video unless they pay I don’t care about The prices that you give those are trivial but I need to know information before I make my mind for purchase and if you have your videos gated I’m just gonna go somewhere else.
I meant to say I don’t care about the prize a person gets for answering a correct question I think what you need is a segment where it’s like this make your videos available all of them but have a special Patreon videos where it’s a hands-on one on one ask you anything, is great for newcomers to get into the modding scene. your set up now is pay you monthly for videos I can find those same videos if I really wanted to the information might come across slightly different but it’s the same information.
Hey, I wanted to do a regular mount- not the stretch. Is there a was
to do it?
Heck ya !!
www.rollingwrenchdenver.com/products/honda-ruckus-gy6-conversion-kit-oem-look