ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Leverage is your second best friend here, right after the right tools 🙌🏾😎
Thanks for watching.
Now I just need to find a 1m pipe, don’t need the pipe now, came off with the spanner. Thank you for your advice
No problem. Works well on the ones that need a bit extra.
You make it look so easy
Using this method, I’ve not had a freewheel I can’t get off.
Or use a vice for a far less complex result by placing the removal tool in the vice and use the rim as leverage.
I’ve still come across some that won’t come off that way.
This was very much helpful 😁,💯👍🏾 good hack on the 1 meter pipe to provide leverage... Lemme go buy my tool now
Thanks for watching
I have an 80's suntour freewheel.... where did you get that old school tool from?? Much love from the BloodShot Studio!
Hey mate honestly I can’t remember. Second hand from somewhere.
@@re-rides any chance you could hit me up with the measurements of the tool so I can find the right one online? 🙏😊
Is it a 4 prong about 40mm across? I’ve got a Suntour from 1978 and the ParkTool FR-6 is a good fit.
@@519CZRacer thanks bud!!
Great tips mate 😎Cheers 🤙
Appreciate it.
Excellent second unit videography from your wife 😉
Sure is.
I have a old school bmx rear wheel, trying to remove the sprocket, it's a 2 prong type, where's a good place to get the right tools to remove it?. I'm not having any luck finding the correct tool.
If you can’t find the tool take it to your local bike shop. Maybe they will have one to fit and help you out.
Video starts at the 8 minute mark
lol. Thanks for watching from there.
this helped, thanks a lot!!!!!
That’s great thanks for watching.
* breaker bar. Put the right spanner in there and not an adjustable nut rounder.
Unfortunately my right size spanner can’t be shoved into the end of a pipe. Certainly would stop the rounding of the removal tool yep.
Bru, I hope your are not earning your life from this. Any way thanks for your advices. You call me back from my 15's years.
lol. Thankfully not.
i have a fixiegear with freewheel I tried with all my power to open it and I didn't Open it
Sorry to hear. Have you tried my method or similar to get as much leverage as possible?
Bro ur thumb is creepy lol
Lol. Not heard that before. Both look pretty normal to me.
👍🗜️🔩🔧
Thanks for the feedback. 🤣
You talk and music m8 1 or othere
Not sure what that means but thanks for watching.
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Leverage is your second best friend here, right after the right tools 🙌🏾😎
Thanks for watching.
Now I just need to find a 1m pipe, don’t need the pipe now, came off with the spanner. Thank you for your advice
No problem. Works well on the ones that need a bit extra.
You make it look so easy
Using this method, I’ve not had a freewheel I can’t get off.
Or use a vice for a far less complex result by placing the removal tool in the vice and use the rim as leverage.
I’ve still come across some that won’t come off that way.
This was very much helpful 😁,💯👍🏾 good hack on the 1 meter pipe to provide leverage... Lemme go buy my tool now
Thanks for watching
I have an 80's suntour freewheel.... where did you get that old school tool from??
Much love from the BloodShot Studio!
Hey mate honestly I can’t remember. Second hand from somewhere.
@@re-rides any chance you could hit me up with the measurements of the tool so I can find the right one online? 🙏😊
Is it a 4 prong about 40mm across? I’ve got a Suntour from 1978 and the ParkTool FR-6 is a good fit.
@@519CZRacer thanks bud!!
Great tips mate 😎
Cheers 🤙
Appreciate it.
Excellent second unit videography from your wife 😉
Sure is.
I have a old school bmx rear wheel, trying to remove the sprocket, it's a 2 prong type, where's a good place to get the right tools to remove it?. I'm not having any luck finding the correct tool.
If you can’t find the tool take it to your local bike shop. Maybe they will have one to fit and help you out.
Video starts at the 8 minute mark
lol. Thanks for watching from there.
this helped, thanks a lot!!!!!
That’s great thanks for watching.
* breaker bar. Put the right spanner in there and not an adjustable nut rounder.
Unfortunately my right size spanner can’t be shoved into the end of a pipe. Certainly would stop the rounding of the removal tool yep.
Bru, I hope your are not earning your life from this. Any way thanks for your advices. You call me back from my 15's years.
lol. Thankfully not.
i have a fixiegear with freewheel I tried with all my power to open it and I didn't Open it
Sorry to hear. Have you tried my method or similar to get as much leverage as possible?
Bro ur thumb is creepy lol
Lol. Not heard that before. Both look pretty normal to me.
👍🗜️🔩🔧
Thanks for the feedback. 🤣
You talk and music m8 1 or othere
Not sure what that means but thanks for watching.