Hey Dana, try putting a high pass filter on your videos to cut out the super low frequencies like 90hz and below, you should be able to do that in the eq section while you are editing. It cleans up the ''muddy' sound when you are driving or when the wind blows etc. Love the content man, I've got a 96 hatch I'm slowly building, and learning about the various computers and harness mods from your videos has been very instrumental for me
What’s up with the mini truck!!! You know I had to ask once’s again lol a year later at least show it off I’ve bin wanting to see it for a while now! Thank you!!
Man I love watching your videos. Just love to see when I get home each day you dropped another video. I love watching all the crx content and just makes me want to get mine going more and more with each video. But we know the story with mine. But I will get it up and going again. I just need a place to work on it. I love the crx so much that every time I see one I have to fallow and talk to them. Another great video. 👍
There is a K24a2(2005) at Sacramento iPulluPull as of Sept. 30 evening. IDK if it has been compression tested but it looks like someone was trying to go thru with it. Might be gone today as I saw a TSX on the lot as I was leaving could just be coincidence.
Ayyeee! So stocked on your LS build I know your going ls/v but still I’m currently tearing down a couple LS motors myself and doing an all motor LS build I know it’s not practical because of cost and power gains but I’m shooting for 180hp-190hp gonna do a port and polish, springs and retainers so I can rev it out with high comp pistons. Making videos along the way I wanna show ppl that if all you can get ahold of is an ls motor you can still get some gains from it and have fun while learning 🤙🏽😎
@@marcobanuelos408 thanks so much for the sub!!! Stay tuned!! I’m sitting on a lot of footage of me working on p75 heads and taking them apart to clean and port and polish them! I’ll be posting those videos soon just had to get ahold of a better laptop so I can edit the footage I’m trying to get away from using my phone and using a dslr camera for higher quality. Thank you so much for the sub!! 🙏 🙏🙏🙏 means a lot to me! I promise I’ll do you right and show you some great content soon!
I have a hood for ef hatch in white. And did u knw that you can use the 90-91 accord 5spd 4.06 fd into b series crv awd transmission and can stack h22 gears onto it? 90-91 prelude si 2.0 has a 4.266 fd that can also work on crv transmission too
where you live out in California bodies are not rusted out but the plastic and rubber parts are dry rotted and broken. where I'm from in Missouri the bodies are rusted out but the plastic rubber parts are good .
Ils tottaly crazy for me to see all theme intégra out in junk yards around you i cant frucking find even one for m’y self for parts lol 300 km around me int none
barely yesterday when i was watching hes videos i was making that question myself! of why he always wearing beanies even when its 100 degree’s outside.
@@fmj9237 I pulled a b20 from the anaheim location a couple months ago and they gave me the same price that they gave you. I left it at the pay window. One year prior I pieced together my swap for under 500
Hey Dana, try putting a high pass filter on your videos to cut out the super low frequencies like 90hz and below, you should be able to do that in the eq section while you are editing. It cleans up the ''muddy' sound when you are driving or when the wind blows etc. Love the content man, I've got a 96 hatch I'm slowly building, and learning about the various computers and harness mods from your videos has been very instrumental for me
Another therapeutic session of junkyard hunt with Dana... 😌 ✨️ 🙌
What’s up with the mini truck!!! You know I had to ask once’s again lol a year later at least show it off I’ve bin wanting to see it for a while now! Thank you!!
No beanie but don't worry Fred's got a mask on outside 😂
There is a white EF hatch in Newark. It’s in the middle back row
me n my friend took the gsr head with skunk2 cams with the ecu + mint confetti seats off that white gsr.
Dayum guys hit a lick boi 👍
Is your ear thing getting bigger no offence just wondering
Man I love watching your videos. Just love to see when I get home each day you dropped another video. I love watching all the crx content and just makes me want to get mine going more and more with each video. But we know the story with mine. But I will get it up and going again. I just need a place to work on it. I love the crx so much that every time I see one I have to fallow and talk to them.
Another great video. 👍
There is a K24a2(2005) at Sacramento iPulluPull as of Sept. 30 evening. IDK if it has been compression tested but it looks like someone was trying to go thru with it. Might be gone today as I saw a TSX on the lot as I was leaving could just be coincidence.
Thank you for this little Friday surprise! Long live the Bs.
Does that yard not have the inventory numbered online??
Bro I rocked a dye dm3 back in the day! would love paintball again
🔥🔥🔥🔥 happy Friday y’all
Junkyard vids are my favorite
Feel you on the beanie I’ve worn one the last decade every day. It’s weird when I don’t have it lol
The Junk yard.. Runs simply awesome... 💯💯💯💯🙏 Really enjoy. Keep well brother.. All the way from Africa, kenya 🇰🇪🌍
We took the trunk of the white eg two weeks ago it was more complete.
Ayyeee! So stocked on your LS build I know your going ls/v but still I’m currently tearing down a couple LS motors myself and doing an all motor LS build I know it’s not practical because of cost and power gains but I’m shooting for 180hp-190hp gonna do a port and polish, springs and retainers so I can rev it out with high comp pistons. Making videos along the way I wanna show ppl that if all you can get ahold of is an ls motor you can still get some gains from it and have fun while learning 🤙🏽😎
Just subbed bro 👍 currently got a 91 DA
@@marcobanuelos408 thanks so much for the sub!!! Stay tuned!! I’m sitting on a lot of footage of me working on p75 heads and taking them apart to clean and port and polish them! I’ll be posting those videos soon just had to get ahold of a better laptop so I can edit the footage I’m trying to get away from using my phone and using a dslr camera for higher quality. Thank you so much for the sub!! 🙏 🙏🙏🙏 means a lot to me! I promise I’ll do you right and show you some great content soon!
@@Honda_Drew Yeee
I have a hood for ef hatch in white.
And did u knw that you can use the 90-91 accord 5spd 4.06 fd into b series crv awd transmission and can stack h22 gears onto it? 90-91 prelude si 2.0 has a 4.266 fd that can also work on crv transmission too
That crank is fine. Polish and send it.
We always use Tide detergent to clean our shop floors works really good might work for your driveway
Planet Eclipse FTW! I've got a LV1.6 and an ETEK4
Beannie...lol.
Blankie,binky.. we all got something
Great video brother, send that crank in to have it polished, assuming it's all that it needs.
Get the crank checked to make sure it's still in tolerance and get it polished... then send it
where you live out in California bodies are not rusted out but the plastic and rubber parts are dry rotted and broken. where I'm from in Missouri the bodies are rusted out but the plastic rubber parts are good .
I used to hate the brown interior. Now that shit is fireeee!
Dana need to built a forester now lol.
What yard is this ?
Trippin about your hair it looks fine.
Ils tottaly crazy for me to see all theme intégra out in junk yards around you i cant frucking find even one for m’y self for parts lol 300 km around me int none
Looks like it had oil and water in the block the bearings looks like it’s been in oil and water milk mixes to me!!
Damn i need that prelude front bumper!!
What junkyard is that???? I saw that white accord wagon and I need parts from it 😭
Yup ef is a hard thing to look for in the junk yard now
By any chance do you have a 1.7l vtec engine head?
That tool is a tack strip remover 😂
Just picked up a b18 super dope!!!! My husband is ecstatic !#
I wonder if he’ll ever get that joint cut off his ear
EFB Motorsports makes a clean looking cowl retention kit
your crank and bearings are fine
Yo Static, your grind is top notch bro. You think you gonna open up your own shop one day?..
When in doubt, send it out
Bro that was my car I sold that GSR to some lady . Dam and to see it on hear like that it's crazy . Wat yard is this at
I have the battery holder and the screws etc if you need
why does the junk yard spray the wheels with an orange stripe?
Good question ...almost like they do with new cars
how do guys find out when theses junkyards have sales?
Connections on the inside and just hunting online junkyard websites
I have the same issue with a junkyard B20b. I'd say these engines were on their last miles , I am going 85mm piston with stock rods cheapo build.
I think for junkyard motors find a crash Crv but even then might as well rebuild the entire engine overtime
Used to paintball 10 years ago.
yo static what junk yard is that
I think his in jersey
maybe try a 2 inch spot on driveway with wd-40. that should help the oil. Dont know just a thought.
damn i need a crx so badly or ef hatch
I call it a panel popper.
That's totally normal on a higher milage crankshaft, and those bearing are definitely NOT spun!
That’s kinda what I was thinking too…
Heya Dana or anyone know what other coilovers I can put on my 91 INTEGRA like adjustable coil overs
imma start taking my accord apart now
The bearings look overheated
barely yesterday when i was watching hes videos i was making that question myself! of why he always wearing beanies even when its 100 degree’s outside.
You need to make some “YoungStatic” beanies to sell!!!!!!!! 🔥🔥🔥🔥❤️🔥🔥🔥🔥🔥🔥🔥
get it....LUCKY!!!!!!!!
Aye I just posted a junkyard video too! Nothing better than getting out into the yard.
Bruh everytime I go to a junkyard hunting k20’s, someone always pulls the whole oil pump, chain, windage tray, and screws😭😭
They didn’t keep I’m on Maintenance and would cause those streaks in the bearings
What's louder then a jack being dragged, YoungStatics engine stand wheels lol. JK..
Bruh I need to get my lazy ass to my local junkyard asap
Aye man is there a possibility you got a 2000 Honda Civic DX manual shifter lever as extra maybe can sell it to me ?
U need the new look bro 🔥🔥🔥
I think dude from TikTok got the gsr head
Is 750 for a junkyard motor too much? What do you think?
It is. Depends
@@cbdreamer1709 I was at an LKQ yard and they're selling any motor at a flat rate of 750. Nothing tested at all.
Rip off. Where you live
@@cbdreamer1709 anaheim lol this was at the Stanton LKQ
@@fmj9237 I pulled a b20 from the anaheim location a couple months ago and they gave me the same price that they gave you. I left it at the pay window. One year prior I pieced together my swap for under 500
Let's goo!!!
They call plastic clips popper
You aint an ef fan unless you own a sedan ! lol
Panel popper
Yo 1g and 2g eclipse..
Hope im the winner for Laponda
fam when you going to do a 2nd gen crx aka the del sol lol. I love mine I want to k swap it so bad.
I could use your help with my EF Mr Wizard check your dm's
Get a forester😁😁
And here I thought your were sponsored by keeps hair regrowth medicine and your were
going to sell us keeps hair regrowth medicine?😆🙂😎❤👍
Fork.. clip puller
My boy needs a face trim
Clip tool
You look lgood
I hope I win the laponda first stick car 😅 never too late to learn
Here’s a civic for you to look at for inspiration
th-cam.com/video/JHEJbDa1T_k/w-d-xo.html