Know few about SigmaStudio programming? Get 3-way Digital Crossover in 3 min with PC UI for JAB5!
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Digital crossover can divide full-range frequency audio signal into different frequency bands and deliver them to corresponding speakers for playback, which can give full play to tweeters, midranges and subwoofers and improve the dynamic range of audio for better listening experience.
A lot of customers want digital crossover but they are not familiar with SigmaStudio programming. Here comes the good news! You can set digital crossover through PC UI - Miumax for JAB5 directly. Graphical user interface simplifies the difficulties of audio adjustments. You only need to enter cut-off frequency value and drag the EQ curve. The whole process takes only several minutes!
In this video, we connect WONDOM JAB5 with stereo 30W TAS5754 I2S amplifier to build an audio 4.2 system. Besides that, we make demonstration on how to configure the 3-way crossover through PC UI for JAB5. Wish this video could help you.
Miumax for JAB5: files.sure-elec...
-----------------------------------------------------------------------------------------------------------------
Where to find us:
Online shop: store.sure-ele...
Aliexpress shop: wondom.aliexpr...
Amazon shop: www.amazon.com...
eBay shop: www.ebay.com/s...
How can I use sigmastudio?
Is there a sigmastudio file available for a 2.2 sytem?
Hello. Can the Bluetooth module be programmed with a csr spi programmer?
Hello, between Miumax/PC UI and SigmaStudio there is a difference in final sound quality using same parameters?
How does this work with sigmastudio compatibility?
Is there a sigmastudio file available?
Or is it not possible to combine both the programs?
Any documentation I could find somewhere about this setup?
Hello. Please note that PC UI control and SigmaStudio program are two different control methods. They work independently by different firmware and will not affect each other.
@WONDOM Audio okay thanks for the reply.
Can I learn somewhere how to program 4.2 three way design using the jab 5 + 2x30w in sigmastudio?
Hello, we have released a demo program of 4.2 system for JAB4 and 2x30W TAS5754. You can make modification based on this program for that of JAB5 and 2x30W. Here is the link for your reference.
store.sure-electronics.com/images/documents/JAB4&TAS5754_4.2%20System_3way_DigitalCrossOver_2021.07.12.zip
I'm wondering about jab5 long time Allready but on the official site was no black Friday deals. 😞 I can mix 4ohm and 8ohm if gonna use two boards? Is it possible to set up mono speaker and send second side signal to another mono speaker I guess in this situation through the wire?
I try to build the same system;
I experienced a sudden very loud harsh noise comming out of my tweeters (powered by TAS5756) when plugging my TAS5756 to JAB5 with I2S.
There are no such problems on mids and bass, allocated to JAB5
Could you help me please ?
Hello, please kindly write this program into the DSP of JAB5 and try it again (files.sure-electronics.com/download/JAB5_TAS5754_DSP_DSPPROJ.zip). If there is still problem, could you please kindly send us some videos so that we can pinpoint the problem and solve it for you? You can contact us at store@sure-electronics.com. Wish this could help you. Have a fantastic day~
Is it possible to set the bluetooth module to tws mode? Please release the pinout of the btm
Hello. Our products don’t support TWS function for now. Products supporting TWS are under development and will be released soon. Please kindly stay tuned.
Hello! One question about jab3+: How to turn off it without disconnect from battery (bcpb2 3s)? IS there a place to connect power button?
Hello. You can connect a control button between Pin "STBY" and Pin "GND" of J12 on JAB3+ for power control.
Song name please
Hello! The song is 'Army' by Besomorph, Arcando, and Neoni. Enjoy your day!
There is a problem. Must be fanless