How To Replace And Setting Timing Opener cam For Juki Lu-2810-7||Technical Access

How to replace and setting timing opener cam for juki lu-2810-7
Opener timing
Loosen setscrew of the opener cam [With thread trimmer]
Three marker dots on the handwheel aligns with mark- er line E on the motor cover when the opener comes nearest to the protruding portion of bobbin case. Then tighten setscrew of the opener cam
[Without thread trimmer]
The needle hole of feed dog and the center of inner hook and the base of blade point of hook are aligned linearly when the needle bar has gone up and the opener comes nearest to the protruding portion of bobbin case. Then tighten setscrew of the opener cam
It can be said that opener is in the closest position to the hook in a certain phase-angle range
against lower shaft gear immediately before opener is moving away from the closest position to the hook,In this state, tighten setscrew of opener cam
#Opener cam
#juki machine
#Technical access

[@tuttahsmith7481]

Thank you for sharing. We need more videos for this Juki 2810 machine. You will get many more subscribers from the Juki club.

[@mohinuddin247]

Good job...

[@fiazmuhammad7659]

Nice

[@jhzgameplay5499]

good